FEL2014 - List of Authors (Schulz, L.)

Paper

Title

Page

Status of the SwissFEL C-band Linac

322

F. Löhl, J. Alex, H. Blumer, M. Bopp, H.-H. Braun, A. Citterio, U. Ellenberger, H. Fitze, H. Jöhri, T. Kleeb, L. Paly, J.-Y. Raguin, L. Schulz, R. Zennaro, C. Zumbach
PSI, Villigen PSI, Switzerland

The linear accelerator of SwissFEL will be based on C- band technology. This paper summarizes the latest results that were achieved with the first prototype components. Fur- thermore, the progress and plans of the series production are discussed.

Slides TUA04 [11.482 MB]

THP091

Design and Test of Wire-Scanners for SwissFEL

948

G.L. Orlandi, M. Baldinger, H. Brands, P. Heimgartner, R. Ischebeck, A. Kammerer, F. Löhl, R. Lüscher, P. Mohanmurthy, C. Ozkan, B. Rippstein, V. Schlott, L. Schulz, C. Seiler, S. Trovati, P. Valitutti, D. Zimoch
PSI, Villigen PSI, Switzerland

The SwissFEL light-facility will provide coherent X-rays in the wavelength region 7-0.7 nm and 0.7-0.1 nm. In SwissFEL, view-screens and wire-scanners will be used to monitor the transverse profile of a 200/10pC electron beam with a normalized emittance of 0.4/0.2 mm.mrad and a final energy of 5.7 GeV. Compared to view screens, wire-scanners offer a quasi-non-destructive monitoring of the beam transverse profile without suffering from possible micro-bunching of the electron beam. The main aspects of the design, laboratory characterization and beam-test of the SwissFEL wire-scanner prototype will be presented.

Paper	Title	Page
TUA04	Status of the SwissFEL C-band Linac	322
	F. Löhl, J. Alex, H. Blumer, M. Bopp, H.-H. Braun, A. Citterio, U. Ellenberger, H. Fitze, H. Jöhri, T. Kleeb, L. Paly, J.-Y. Raguin, L. Schulz, R. Zennaro, C. Zumbach PSI, Villigen PSI, Switzerland
	The linear accelerator of SwissFEL will be based on C- band technology. This paper summarizes the latest results that were achieved with the first prototype components. Fur- thermore, the progress and plans of the series production are discussed.
	Slides TUA04 [11.482 MB]

THP091	Design and Test of Wire-Scanners for SwissFEL	948
	G.L. Orlandi, M. Baldinger, H. Brands, P. Heimgartner, R. Ischebeck, A. Kammerer, F. Löhl, R. Lüscher, P. Mohanmurthy, C. Ozkan, B. Rippstein, V. Schlott, L. Schulz, C. Seiler, S. Trovati, P. Valitutti, D. Zimoch PSI, Villigen PSI, Switzerland
	The SwissFEL light-facility will provide coherent X-rays in the wavelength region 7-0.7 nm and 0.7-0.1 nm. In SwissFEL, view-screens and wire-scanners will be used to monitor the transverse profile of a 200/10pC electron beam with a normalized emittance of 0.4/0.2 mm.mrad and a final energy of 5.7 GeV. Compared to view screens, wire-scanners offer a quasi-non-destructive monitoring of the beam transverse profile without suffering from possible micro-bunching of the electron beam. The main aspects of the design, laboratory characterization and beam-test of the SwissFEL wire-scanner prototype will be presented.