FEL2014 - List of Authors (Ding, Y.)

Paper

Title

Page

Harmonic Lasing Options for LCLS-II

148

G. Marcus, Y. Ding, Z. Huang, T.O. Raubenheimer
SLAC, Menlo Park, California, USA
G. Penn
LBNL, Berkeley, California, USA

Harmonic lasing can be a cheap and relatively efficient way to extend the photon energy range of a particular FEL beamline. Furthermore, in comparison to nonlinear harmonics, harmonic lasing can provide a beam that is more intense, stable, and narrow-band. This paper explores the application of the harmonic lasing concept at LCLS-II using various combinations of phase shifters and attenuators. In addition, a scheme by which individual undulator modules are tuned to amplify either the third or fifth harmonic in different configurations is presented in detail.

MOP090

Soft X-ray Self-seeding Simulation Methods and their Application for LCLS

264

S. Serkez
DESY, Hamburg, Germany
Y. Ding, Z. Huang, J. Krzywinski
SLAC, Menlo Park, California, USA

Self-seeding is a promising approach to significantly narrow the SASE bandwidth of XFELs to produce nearly transform-limited pulses. We study radiation propagation through the grating monochromator installed at LCLS. The monochromator design is based on a toroidal variable line spacing grating working at a fixed incidence angle mounting without an entrance slit. It covers the spectral range from 500eV to 1000eV. The optical system was studied using wave optics method to evaluate the performance of the self-seeding scheme. Our wave optics analysis takes into account the finite size of the coherent source, third-order aberrations and height error of the optical elements. Wave optics is the only method available, in combination with FEL simulations, to simulate performance of the monochromator without exit slit. Two approaches for time-dependent simulations are presented, compared and discussed. Also pulse-front tilt phenomenon effect is illustrated.

TUB03

FEL Overcompression in the LCLS

337

J.L. Turner, F.-J. Decker, Y. Ding, Z. Huang, R.H. Iverson, J. Krzywinski, H. Loos, A. Marinelli, T.J. Maxwell, H.-D. Nuhn, D.F. Ratner, T.J. Smith, J.J. Welch, F. Zhou
SLAC, Menlo Park, California, USA

Funding: This work was supported by U.S. Department of Energy, Office of Basic Energy Sciences, under Contract DE-AC02-76SF00515
Overcompression of the Linac Coherent Light Source (LCLS) x-ray Free Electron Laser (FEL) at the SLAC National Accelerator Center is studied. The studies and operational implications are summarized in this talk.

Slides TUB03 [4.493 MB]

TUP032

FEL Simulation and Performance Studies for LCLS-II

456

G. Marcus, Y. Ding, P. Emma, Z. Huang, T.O. Raubenheimer, L. Wang, J. Wu
SLAC, Menlo Park, California, USA

The design and performance of the LCLS-II free-electron laser beamlines are presented using start-to-end numerical particle simulations. The particular beamline geometries were chosen to cover a large photon energy tuning range with x-ray pulse length and bandwidth flexibility. Results for self-amplified spontaneous emission and self-seeded operational modes are described in detail for both hard and soft x-ray beamlines in the baseline design.

TUC02

Soft X-ray Self-seeding Setup and Results at LCLS

D.F. Ratner, J.W. Amann, D.K. Bohler, M. Boyes, D. Cocco, F.-J. Decker, Y. Ding, D. Fairley, Y. Feng, J.B. Hastings, P.A. Heimann, Z. Huang, J. Krzywinski, H. Loos, A.A. Lutman, G. Marcus, A. Marinelli, T.J. Maxwell, S.P. Moeller, P.A. Montanez, D.S. Morton, H.-D. Nuhn, D.R. Walz, J.J. Welch, J. Wu
SLAC, Menlo Park, California, USA
K. Chow, L.N. Rodes
LBNL, Berkeley, California, USA
U. Flechsig
PSI, Villigen PSI, Switzerland
S. Serkez
DESY, Hamburg, Germany

The soft X-ray self seeding program was designed to provide near transform-limited pulses in the range of 500 eV to 1000 eV. The project was a three-way collaboration between SLAC, Lawrence Berkeley National Lab, and the Paul Scherrer Institute in Switzerland. Installation finished in the Fall of 2013, and after the early stages of commissioning we have measured up to 0.5mJ pulse energy and resolving powers of up to 5000 across the design wavelength range, representing a several-fold increase in the brightness compared to the normal LCLS operating mode. Future work will aim to increase the total pulse energy and establish self-seeding as a robust user operation mode.

Slides TUC02 [10.464 MB]

THP026

Design Study of LCLS Chirp-Control with a Corrugated Structure

748

Z. Zhang, K.L.F. Bane, Y. Ding, Z. Huang, R.H. Iverson, T.J. Maxwell, G.V. Stupakov, L. Wang
SLAC, Menlo Park, California, USA
P. Frigola, M.A. Harrison, M. Ruelas
RadiaBeam, Marina del Rey, California, USA

The purpose of this paper is to investigate the use of flat metallic plates with small corrugations as a passive dechirper, studying its effects on beam dynamics. Similar systems have been tested in Pohang and Brookhaven at relatively low energies (~100 MeV) and with relatively long bunches (>1ps) [*,**]. Four meters of such a structure are being machined by Radiabeam Systems for use in the LCLS with a high energy and femtosecond electron beam. In this paper we use a field matching program to obtain the longitudinal and transverse wakes for the purpose of the LCLS dechirper design. In addition, we fit the longitudinal wake to simple functions, so that one can obtain the wake without resorting to the field matching program. Since the transverse wakes–both dipole and quadrupole wakes–are strong, we include beam dynamics simulations to find the tolerances for injection jitter and misalignment in the LCLS.
* P. Emma, et al. PRL 112, 034801
** M. Harrison, et al., NaPAc 2013, Pasadena, USA

THP031

Further Understanding the LCLS Injector Emittance

774

F. Zhou, K.L.F. Bane, Y. Ding, Z. Huang, H. Loos
SLAC, Menlo Park, California, USA

Funding: US DOE under contract No. DE-AC02-76SF00515
Notable COTR effect from the LCLS laser heater chicane is recently observed at the LCLS injector OTR screen, used for routine emittance measurements. The emittance with the OTR screen is under-estimated by about 30% compared to the values with the wire scanner located next to the OTR screen. The emittance with the OTR and wire scanner is compared and relevant analyses are presented. Slice emittance upstream of the LCLS BC1 is measured using a traditional transverse cavity. Recently, slice emittance downstream of the BC1 is able to be measured with a newly developed technique, using a collimator located in the middle of the BC1. The parasitic effects of using the collimator for slice emittance measurement are evaluated. The slice emittance before and after the BC1 is compared. The dependence of the slice emittance on the linearizer’s transverse offset and CSR effect from the BC1 is discussed.

Paper	Title	Page
MOP054	Harmonic Lasing Options for LCLS-II	148
	G. Marcus, Y. Ding, Z. Huang, T.O. Raubenheimer SLAC, Menlo Park, California, USA G. Penn LBNL, Berkeley, California, USA
	Harmonic lasing can be a cheap and relatively efficient way to extend the photon energy range of a particular FEL beamline. Furthermore, in comparison to nonlinear harmonics, harmonic lasing can provide a beam that is more intense, stable, and narrow-band. This paper explores the application of the harmonic lasing concept at LCLS-II using various combinations of phase shifters and attenuators. In addition, a scheme by which individual undulator modules are tuned to amplify either the third or fifth harmonic in different configurations is presented in detail.

MOP090	Soft X-ray Self-seeding Simulation Methods and their Application for LCLS	264
	S. Serkez DESY, Hamburg, Germany Y. Ding, Z. Huang, J. Krzywinski SLAC, Menlo Park, California, USA
	Self-seeding is a promising approach to significantly narrow the SASE bandwidth of XFELs to produce nearly transform-limited pulses. We study radiation propagation through the grating monochromator installed at LCLS. The monochromator design is based on a toroidal variable line spacing grating working at a fixed incidence angle mounting without an entrance slit. It covers the spectral range from 500eV to 1000eV. The optical system was studied using wave optics method to evaluate the performance of the self-seeding scheme. Our wave optics analysis takes into account the finite size of the coherent source, third-order aberrations and height error of the optical elements. Wave optics is the only method available, in combination with FEL simulations, to simulate performance of the monochromator without exit slit. Two approaches for time-dependent simulations are presented, compared and discussed. Also pulse-front tilt phenomenon effect is illustrated.

TUB03	FEL Overcompression in the LCLS	337
	J.L. Turner, F.-J. Decker, Y. Ding, Z. Huang, R.H. Iverson, J. Krzywinski, H. Loos, A. Marinelli, T.J. Maxwell, H.-D. Nuhn, D.F. Ratner, T.J. Smith, J.J. Welch, F. Zhou SLAC, Menlo Park, California, USA
	Funding: This work was supported by U.S. Department of Energy, Office of Basic Energy Sciences, under Contract DE-AC02-76SF00515 Overcompression of the Linac Coherent Light Source (LCLS) x-ray Free Electron Laser (FEL) at the SLAC National Accelerator Center is studied. The studies and operational implications are summarized in this talk.
	Slides TUB03 [4.493 MB]

TUP032	FEL Simulation and Performance Studies for LCLS-II	456
	G. Marcus, Y. Ding, P. Emma, Z. Huang, T.O. Raubenheimer, L. Wang, J. Wu SLAC, Menlo Park, California, USA
	The design and performance of the LCLS-II free-electron laser beamlines are presented using start-to-end numerical particle simulations. The particular beamline geometries were chosen to cover a large photon energy tuning range with x-ray pulse length and bandwidth flexibility. Results for self-amplified spontaneous emission and self-seeded operational modes are described in detail for both hard and soft x-ray beamlines in the baseline design.

TUC02	Soft X-ray Self-seeding Setup and Results at LCLS
	D.F. Ratner, J.W. Amann, D.K. Bohler, M. Boyes, D. Cocco, F.-J. Decker, Y. Ding, D. Fairley, Y. Feng, J.B. Hastings, P.A. Heimann, Z. Huang, J. Krzywinski, H. Loos, A.A. Lutman, G. Marcus, A. Marinelli, T.J. Maxwell, S.P. Moeller, P.A. Montanez, D.S. Morton, H.-D. Nuhn, D.R. Walz, J.J. Welch, J. Wu SLAC, Menlo Park, California, USA K. Chow, L.N. Rodes LBNL, Berkeley, California, USA U. Flechsig PSI, Villigen PSI, Switzerland S. Serkez DESY, Hamburg, Germany
	The soft X-ray self seeding program was designed to provide near transform-limited pulses in the range of 500 eV to 1000 eV. The project was a three-way collaboration between SLAC, Lawrence Berkeley National Lab, and the Paul Scherrer Institute in Switzerland. Installation finished in the Fall of 2013, and after the early stages of commissioning we have measured up to 0.5mJ pulse energy and resolving powers of up to 5000 across the design wavelength range, representing a several-fold increase in the brightness compared to the normal LCLS operating mode. Future work will aim to increase the total pulse energy and establish self-seeding as a robust user operation mode.
	Slides TUC02 [10.464 MB]

THP026	Design Study of LCLS Chirp-Control with a Corrugated Structure	748
	Z. Zhang, K.L.F. Bane, Y. Ding, Z. Huang, R.H. Iverson, T.J. Maxwell, G.V. Stupakov, L. Wang SLAC, Menlo Park, California, USA P. Frigola, M.A. Harrison, M. Ruelas RadiaBeam, Marina del Rey, California, USA
	The purpose of this paper is to investigate the use of flat metallic plates with small corrugations as a passive dechirper, studying its effects on beam dynamics. Similar systems have been tested in Pohang and Brookhaven at relatively low energies (~100 MeV) and with relatively long bunches (>1ps) [,]. Four meters of such a structure are being machined by Radiabeam Systems for use in the LCLS with a high energy and femtosecond electron beam. In this paper we use a field matching program to obtain the longitudinal and transverse wakes for the purpose of the LCLS dechirper design. In addition, we fit the longitudinal wake to simple functions, so that one can obtain the wake without resorting to the field matching program. Since the transverse wakes–both dipole and quadrupole wakes–are strong, we include beam dynamics simulations to find the tolerances for injection jitter and misalignment in the LCLS. P. Emma, et al. PRL 112, 034801 ** M. Harrison, et al., NaPAc 2013, Pasadena, USA

THP031	Further Understanding the LCLS Injector Emittance	774
	F. Zhou, K.L.F. Bane, Y. Ding, Z. Huang, H. Loos SLAC, Menlo Park, California, USA
	Funding: US DOE under contract No. DE-AC02-76SF00515 Notable COTR effect from the LCLS laser heater chicane is recently observed at the LCLS injector OTR screen, used for routine emittance measurements. The emittance with the OTR screen is under-estimated by about 30% compared to the values with the wire scanner located next to the OTR screen. The emittance with the OTR and wire scanner is compared and relevant analyses are presented. Slice emittance upstream of the LCLS BC1 is measured using a traditional transverse cavity. Recently, slice emittance downstream of the BC1 is able to be measured with a newly developed technique, using a collimator located in the middle of the BC1. The parasitic effects of using the collimator for slice emittance measurement are evaluated. The slice emittance before and after the BC1 is compared. The dependence of the slice emittance on the linearizer’s transverse offset and CSR effect from the BC1 is discussed.