Paper | Title | Page |
---|---|---|
MOOHC2 | The US Electron Ion Collider Accelerator Designs | 1 |
|
||
With the completion of the National Academies of Sciences Assessment of a US Electron-Ion Collider, the prospects for construction of such a facility have taken a step forward. This paper provides an overview of the two site-specific EIC designs: JLEIC (Jefferson Lab) and eRHIC (BNL) as well as brief overview of ongoing EIC R&D. | ||
![]() |
Slides MOOHC2 [14.774 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOOHC2 | |
About • | paper received ※ 29 August 2019 paper accepted ※ 04 September 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOYBA4 | eRHIC Design Update | 18 |
TUPLO11 | use link to see paper's listing under its alternate paper code | |
|
||
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The future electron-ion collider (EIC) aims at an electron-proton luminosity of 1033 to 1034 cm-2 sec-1 and a center-of-mass energy range from 20 to 140 GeV. The eRHIC design has been continuously evolving over a couple of years and has reached a considerable level of maturity. The concept is generally conservative with very few risk items which are mitigated in various ways. |
||
![]() |
Slides MOYBA4 [5.466 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOYBA4 | |
About • | paper received ※ 24 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOYBA6 | Accelerator Performance During the Beam Energy Scan II at RHIC in 2019 | 26 |
|
||
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. RHIC provided Au-Au collisions at beam energies of 9.8, 7.3, 4.59 and 3.85 GeV/nucleon during the first year of the Beam Energy Scan II in 2019. The physics goals at the first two higher beam energies were achieved. At the two lower beam energies, bunched electron beam cooling has been demonstrated successfully. The accelerator performance was improved compared to when RHIC was operated at these energies in earlier years. This article will introduce the challenges to operate RHIC at low energies and the corresponding countermeasures, and review the improvement of accelerator performance during the operation in 2019. |
||
![]() |
Slides MOYBA6 [6.579 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-MOYBA6 | |
About • | paper received ※ 21 August 2019 paper accepted ※ 06 September 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUZBB3 | Precise Beam Velocity Matching for the Experimental Demonstration of Ion Cooling With a Bunched Electron Beam | 356 |
|
||
The first ever electron cooling based on the RF acceleration of electron bunches was experimentally demonstrated on April 5, 2019 at the Low Energy RHIC Electron Cooler (LEReC) at BNL. The critical step in obtaining successful cooling of the Au ion bunches in the RHIC cooling sections was the accurate matching of average longitudinal velocities of electron and ion beams corresponding to a relative error of less than 5·10-4 in the e-beam momentum. Since the electron beam kinetic energy is just 1.6 MeV, measuring the absolute e-beam energy with sufficient accuracy and eventually achieving the electron-ion velocity matching was a nontrivial task. In this paper we describe our experience with measuring and setting the e-beam energy at LEReC. | ||
![]() |
Slides TUZBB3 [1.340 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUZBB3 | |
About • | paper received ※ 26 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPLO05 | Fixed Target Operation at RHIC in 2019 | 542 |
|
||
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. RHIC operated in fixed target mode at beam energies 4.59, 7.3, and 31.2 GeV/nucleon in 2019 as a part of the Beam Energy Scan II program. To scrape beam halo effectively at the fixed target which is 2.05 m away from the center of the STAR detectors, lattice design with relative large beta function at STAR was implemented at the two lower energies. The kickers of the base-band tune (BBQ) measurement system were engaged to dilute the beam transversely to maintain the event rate except for 31.2 GeV/nucleon. In addition, beam orbit control, tune and chromaticity adjustments were used to level the event rate. This paper will review the operational experience of RHIC in fixed target mode at various energies. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLO05 | |
About • | paper received ※ 21 August 2019 paper accepted ※ 15 September 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPLO12 | Off-Momentum Optics Correction in RHIC | 556 |
|
||
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. Future operations of the electron-ion collider eRHIC call for beams circulating off of the magnetic center of all arc elements. In order to ensure that both stable beam conditions and the desired circumference change can be achieved, dedicated experiments were conducted during RHIC Run18, which included the first off-momentum linear optics correction. This article reviews the experimental setup as well as the dedicated algorithm for optics correction, and presents the measured radial excursion and residual off-momentum beta-beat. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-TUPLO12 | |
About • | paper received ※ 27 August 2019 paper accepted ※ 15 September 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPLS04 | Simulations of Low Energy Au78+ Losses in RHIC | 775 |
|
||
Funding: Work supported by Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. Department of Energy. The RHIC Run19 BES-II program features the commissioning of the Low Energy RHIC electron Cooling (LEReC) Project, which uses electron cooling techniques to compensate for intra-beam scattering and thus to improve the luminosity lifetime. During RHIC operations at 3.85 GeV (beam energy) with LEReC, one needs to ensure that the electron beam energy is properly matched for cooling purposes: if so, some of the circulating Au-79 ions can recombine with an electron, turning into Au-78 and circulating with a large momentum offset. Part of the LEReC commissioning steps is therefore to drive a maximized number of Au-78 ions towards a chosen location of the RHIC mechanical aperture to generate particle showers that can be detected by a Recombination Monitor outside the cryostat. This article introduces the baseline lattice design, then discusses the few scenarios considered for optimizing Au-78 losses at a given location. Each scenario is then simulated using new tracking tools for generating beam loss maps. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-WEPLS04 | |
About • | paper received ※ 27 August 2019 paper accepted ※ 03 September 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THZBA5 | First Electron Cooling of Hadron Beams Using a Bunched Electron Beam | 957 |
|
||
Funding: Work supported by the U.S. Department of Energy. The Low Energy RHIC electron Cooler (LEReC) was recently constructed and commissioned at BNL. The LEReC is the first electron cooler based on the RF acceleration of electron bunches (previous electron coolers all used DC beams). Bunched electron beams are necessary for cooling hadron beams at high energies. The challenges of such an approach include generation of electron beams suitable for cooling, delivery of electron beams of the required quality to the cooling sections without degradation of beam emittances and energy spread, achieving required small angles between electrons and ions in the cooling sections, precise energy matching between the two beams, high-current operation of the electron accelerator, as well as several physics effects related to bunched beam cooling. Following successful commissioning of the electron accelerator in 2018, the focus of the LEReC project in 2019 was on establishing electron-ion interactions and demonstration of cooling process using electron energy of 1.6MeV (ion energy of 3.85GeV/n), which is the lowest energy of interest. Here we report on the first demonstration of Au ion cooling in RHIC using this new approach. |
||
![]() |
Slides THZBA5 [16.417 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2019-THZBA5 | |
About • | paper received ※ 16 August 2019 paper accepted ※ 31 August 2019 issue date ※ 08 October 2019 | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |