IPAC2018 - List of Authors (Angulo, C.)

Paper	Title	Page
MOPML017	Status and Development of the MYRRHA Injector	432
	D. Mäder, H. Höltermann, D. Koser, B. Koubek, K. Kümpel, P. Müller, U. Ratzinger, M. Schwarz, W. Schweizer BEVATECH, Frankfurt, Germany C. Angulo, J. Belmans, D. Davin, W. De Cock, P. Della Faille, F. Doucet, A. Gatera, Pompon, F.F. Pompon, D. Vandeplassche Studiecentrum voor Kernenergie - Centre d'Étude de l'énergie Nucléaire (SCK•CEN), Mol, Belgium M. Busch, H. Hähnel, H. Podlech IAP, Frankfurt am Main, Germany
	The MYRRHA project aims at coupling a cw 600 MeV, 4 mA proton linac with a sub-critical reactor as the very first prototype nuclear reactor to be driven by a particle accelerator (ADS). Among several applications, MYRRHA main objective is to demonstrate the principle of partitioning and transmutation (P&T) as a viable solution to drastically reduce the radiotoxicity of long-life nuclear waste. For this purpose, the linac needs an unprecedented level of reliability in terms of allowable beam trips. The normal conducting injector delivers 16.6 MeV protons to the superconducting main linac. The first section of the injector (up to 5.9 MeV) consists of an ECR source, a 4-Rod-RFQ and a rebunching line followed by 7 individual CH-type cavities. This entire section will be set up and operated by SCK·CEN in Louvain-la-Neuve, Belgium, for ample performance and reliability testing. The first CH cavity has been sent for power tests to IAP Frankfurt, Germany. The most recent status of all cavities, couplers and the beam diagnostics of the MYRRHA injector is presented in this paper.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPML017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF001	Requirements for the Cryogenic Refrigerator and the He Distribution System for the MYRRHA 100 Mev Accelerator	655
	T. Junquera Accelerators and Cryogenic Systems, Orsay, France C. Angulo Studiecentrum voor Kernenergie - Centre d'Étude de l'énergie Nucléaire (SCK•CEN), Mol, Belgium D. Vandeplassche SCK•CEN, Mol, Belgium
	MYRRHA is an ADS demonstrator for the long-lived radioactive waste transmutation. It is composed of a High Energy CW Linac Accelerator (600 MeV - 4mA) coupled to a Subcritical Reactor of 100 MW thermal power. The main challenge of the Linac is a very high reliability performance to limit stress and long restart procedures of the reactor. Within the MYRRHA project phased approach for the construction, a 100 MeV-4 mA Linac (Injector up to 17 MeV and SC Linac between 17 MeV and 100 MeV) will be constructed in the Phase 1, covering 2016-2024. The SC Linac is composed of 58 Single-Spoke SC cavities, housed in 29 cryomodules. The cavities operates at 352 MHz, in a superfluid Helium bath at 2K. In this paper, the requirements for the Linac Cryogenic System are presented. The analysis of high thermal loads induced by the CW mode operation of cavities, leads to a Cryogenic Refrigerator with a power of 2700 W (equiv. power capacity at 4.5 K). Each cryomodule is connected through a dedicated Valve Box to the Helium transfer line running along the Linac tunnel. A description of the cryogenic system features and initial models of the tunnel and associated buildings are presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF001
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF003	Integrated Prototyping in View of the 100 MeV Linac for Myrrha Phase 1	661
	D. Vandeplassche, J. Belmans SCK•CEN, Mol, Belgium C. Angulo, D. Davin, W. De Cock, P. Della Faille, F. Doucet, A. Gatera, Pompon, F.F. Pompon Studiecentrum voor Kernenergie - Centre d'Étude de l'énergie Nucléaire (SCK•CEN), Mol, Belgium D. Bondoux, F. Bouly LPSC, Grenoble Cedex, France H. Höltermann, D. Mäder BEVATECH, Frankfurt, Germany C. Joly, G. Olry, H. Saugnac IPN, Orsay, France M. Loiselet, N. Postiau, L. Standaert UCL, Louvain-la-Neuve, Belgium H. Podlech, U. Ratzinger IAP, Frankfurt am Main, Germany
	Funding: Work partially supported by the European Commission H2020 programme MYRTE #662186 The MYRRHA project borne by SCK•CEN, the Belgian Nuclear Research Centre, aims at realizing a pre-industrial Accelerator Driven System (ADS) for exploring the transmutation of long lived nuclear waste. The linac for this ADS will be a High Power Proton Accelerator delivering 2.4 MW CW beam at 600 MeV. It has to satisfy stringent requirements for reliability and availability: a beam-MTBF of 250h is targeted. The reliability goal is pursued through a phased approach. During Phase 1, expected till 2024, the MYRRHA linac up to 100 MeV will be constructed. It will allow to evaluate the reliability potential of the 600 MeV linac. It will also feed a Proton Target Facility in which radioisotopes of interest will be collected through an ISOL system. This contribution will focus on the transition to integrated prototyping, which will emphasize (i) a test platform consisting of the initial section of the normal conducting injector (5.9 MeV), (ii) the realization of a complete cryomodule for the superconducting linac and of its cryogenic valve box. The cryomodule will house two 352 MHz single spoke cavities operated at 2K.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF003
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Status and Development of the MYRRHA Injector

432

D. Mäder, H. Höltermann, D. Koser, B. Koubek, K. Kümpel, P. Müller, U. Ratzinger, M. Schwarz, W. Schweizer
BEVATECH, Frankfurt, Germany
C. Angulo, J. Belmans, D. Davin, W. De Cock, P. Della Faille, F. Doucet, A. Gatera, Pompon, F.F. Pompon, D. Vandeplassche
Studiecentrum voor Kernenergie - Centre d'Étude de l'énergie Nucléaire (SCK•CEN), Mol, Belgium
M. Busch, H. Hähnel, H. Podlech
IAP, Frankfurt am Main, Germany

The MYRRHA project aims at coupling a cw 600 MeV, 4 mA proton linac with a sub-critical reactor as the very first prototype nuclear reactor to be driven by a particle accelerator (ADS). Among several applications, MYRRHA main objective is to demonstrate the principle of partitioning and transmutation (P&T) as a viable solution to drastically reduce the radiotoxicity of long-life nuclear waste. For this purpose, the linac needs an unprecedented level of reliability in terms of allowable beam trips. The normal conducting injector delivers 16.6 MeV protons to the superconducting main linac. The first section of the injector (up to 5.9 MeV) consists of an ECR source, a 4-Rod-RFQ and a rebunching line followed by 7 individual CH-type cavities. This entire section will be set up and operated by SCK·CEN in Louvain-la-Neuve, Belgium, for ample performance and reliability testing. The first CH cavity has been sent for power tests to IAP Frankfurt, Germany. The most recent status of all cavities, couplers and the beam diagnostics of the MYRRHA injector is presented in this paper.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-MOPML017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF001

Requirements for the Cryogenic Refrigerator and the He Distribution System for the MYRRHA 100 Mev Accelerator

655

T. Junquera
Accelerators and Cryogenic Systems, Orsay, France
C. Angulo
Studiecentrum voor Kernenergie - Centre d'Étude de l'énergie Nucléaire (SCK•CEN), Mol, Belgium
D. Vandeplassche
SCK•CEN, Mol, Belgium

MYRRHA is an ADS demonstrator for the long-lived radioactive waste transmutation. It is composed of a High Energy CW Linac Accelerator (600 MeV - 4mA) coupled to a Subcritical Reactor of 100 MW thermal power. The main challenge of the Linac is a very high reliability performance to limit stress and long restart procedures of the reactor. Within the MYRRHA project phased approach for the construction, a 100 MeV-4 mA Linac (Injector up to 17 MeV and SC Linac between 17 MeV and 100 MeV) will be constructed in the Phase 1, covering 2016-2024. The SC Linac is composed of 58 Single-Spoke SC cavities, housed in 29 cryomodules. The cavities operates at 352 MHz, in a superfluid Helium bath at 2K. In this paper, the requirements for the Linac Cryogenic System are presented. The analysis of high thermal loads induced by the CW mode operation of cavities, leads to a Cryogenic Refrigerator with a power of 2700 W (equiv. power capacity at 4.5 K). Each cryomodule is connected through a dedicated Valve Box to the Helium transfer line running along the Linac tunnel. A description of the cryogenic system features and initial models of the tunnel and associated buildings are presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF001

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPAF003

Integrated Prototyping in View of the 100 MeV Linac for Myrrha Phase 1

661

D. Vandeplassche, J. Belmans
SCK•CEN, Mol, Belgium
C. Angulo, D. Davin, W. De Cock, P. Della Faille, F. Doucet, A. Gatera, Pompon, F.F. Pompon
Studiecentrum voor Kernenergie - Centre d'Étude de l'énergie Nucléaire (SCK•CEN), Mol, Belgium
D. Bondoux, F. Bouly
LPSC, Grenoble Cedex, France
H. Höltermann, D. Mäder
BEVATECH, Frankfurt, Germany
C. Joly, G. Olry, H. Saugnac
IPN, Orsay, France
M. Loiselet, N. Postiau, L. Standaert
UCL, Louvain-la-Neuve, Belgium
H. Podlech, U. Ratzinger
IAP, Frankfurt am Main, Germany

Funding: Work partially supported by the European Commission H2020 programme MYRTE #662186
The MYRRHA project borne by SCK•CEN, the Belgian Nuclear Research Centre, aims at realizing a pre-industrial Accelerator Driven System (ADS) for exploring the transmutation of long lived nuclear waste. The linac for this ADS will be a High Power Proton Accelerator delivering 2.4 MW CW beam at 600 MeV. It has to satisfy stringent requirements for reliability and availability: a beam-MTBF of 250h is targeted. The reliability goal is pursued through a phased approach. During Phase 1, expected till 2024, the MYRRHA linac up to 100 MeV will be constructed. It will allow to evaluate the reliability potential of the 600 MeV linac. It will also feed a Proton Target Facility in which radioisotopes of interest will be collected through an ISOL system. This contribution will focus on the transition to integrated prototyping, which will emphasize (i) a test platform consisting of the initial section of the normal conducting injector (5.9 MeV), (ii) the realization of a complete cryomodule for the superconducting linac and of its cryogenic valve box. The cryomodule will house two 352 MHz single spoke cavities operated at 2K.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2018-TUPAF003

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)