ICALEPCS2019 - List of Authors (Maesaka, H.)

Paper	Title	Page
TUAPP02	Development of the MTCA.4 I/O Cards for SPring-8 Upgrade and New 3 GeV Light Source	665
	T. Fukui, N. Hosoda RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan M. Ishii JASRI/SPring-8, Hyogo-ken, Japan E. Iwai, H. Maesaka, T. Ohshima RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
	We will start a full energy injection from the SACLA to the SPring-8 from next year as a part of the SPring-8 upgrade. For this, we developed several I/O cards with the MTCA.4 form factor. One of the key issues is a timing synchronization between SACLA and SPring-8. We implemented required functions on the FPGA logic of a commercially available I/O card. We develop a module to distribute a trigger and clocks. We also developed cards used for the beam position monitor (BPM) and low-level RF system (LLRF). Those are included two types of cards. One is a 16-bit digitizer used for LLRF for the SPring-8 since 2018 march. We will use the card for the BPM with modified FPGA logic. Second is an implementation of functions with the pulsed RF signals processed on the FPGA logic of a commercially available card. These functions are used for the BPM of the beam transport line from the SACLA to SPring-8. The existing system is used 1 Hz beam repetition but we need more than 10 Hz to achieve an injection time less than 20 minutes to maximize user time. We will report the performance of the MTCA.4 cards, the upgrade plan of the SPring-8, and the construction of the 3 GeV Light Source.
	Slides TUAPP02 [7.123 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-TUAPP02
About •	paper received ※ 01 October 2019 paper accepted ※ 20 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THAPP03	Construction of Beam Monitor Control System for Beam Transport From SACLA to SPring-8	1544
	A. Kiyomichi, N. Hosoda, M. Yamaga JASRI, Hyogo, Japan T. Fukui RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan M. Ishii JASRI/SPring-8, Hyogo-ken, Japan H. Maesaka RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
	In a part of the SPring-8 upgrade project, the SACLA linac will be used as the injector for the SPring-8 storage ring. We will upgrade the beam monitor system for beam transport, which consists of screen monitor (SCM), beam position monitor (BPM) and current monitor (CT). For the SCM, we adopted GigE Vision standard for the CCD camera and EtherCAT as a field bus for the stepper motor control of focusing system. We have developed camera control software using open source libraries to integrate various vendors’ GigE Vision cameras with the SPring-8 control framework. A grabbed image is stored into the file server and property, such as camera settings for image and event number, is stored into the database. The BPM is a key device for precise and stable injection. We adopted the commercially available MTCA.4 fast ADC/DAC module with modified firmware developed for readout of the BPM and the CT. We are developing acquisition software for MTCA.4 modules to synchronize with a beam trigger. The acquired data are stored into the database with time stamp and event number. We present the preparation of beam monitor control system for the beam transport to injection from SACLA to SPring-8.
	Slides THAPP03 [9.593 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-THAPP03
About •	paper received ※ 01 October 2019 paper accepted ※ 09 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA112	Database Scheme for On-Demand Beam Route Switching Operations at SACLA/SPring-8	1352
	K. Okada, N. Hosoda, T. Ohshima, T. Sugimoto, M. Yamaga JASRI, Hyogo, Japan T. Fujiwara, T. Maruyama, T. Ohshima, T. Okada RIKEN SPring-8 Center, Hyogo, Japan T. Fukui, N. Hosoda, H. Maesaka RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan O. Morimoto, Y. Tajiri SES, Hyogo-pref., Japan
	At SACLA, the X-ray free electron laser (XFEL) facility, we have been operating the electron linac in time-sharing (equal duty) mode between beamlines. The next step is to vary the duty factor on an on-demand basis and to bring the beam into the SP8 storage ring. It is a part of a big picture of an upgrade. The low-emittance beam is ideal for the next generation storage ring. In every 60 Hz repetition cycle, we have to deal a bunch of electrons properly. The challenge here is we must keep the beam quality for the XFEL demands while responding occasional injection requests from the storage ring. This paper describes the database system that supports both SACLA/SP8 operations. The system is a combination of RDB and NoSQL databases. In the on-demand beam switching operation, the RDB part keeps the parameters to define sequences, which include a set of one-second route patterns, and a bucket sequence for the injection, etc. As for data analysis, it is going to be a post-process to build an event for a certain route, because not all equipment get the route command in real time. We present the preparation status toward the standard operation for beamline users. http://rsc.riken.jp/pdf/SPring-8-II.pdf **IPAC2019 proceedings
	Poster WEPHA112 [0.561 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WEPHA112
About •	paper received ※ 01 October 2019 paper accepted ※ 09 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Development of the MTCA.4 I/O Cards for SPring-8 Upgrade and New 3 GeV Light Source

665

T. Fukui, N. Hosoda
RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan
M. Ishii
JASRI/SPring-8, Hyogo-ken, Japan
E. Iwai, H. Maesaka, T. Ohshima
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan

We will start a full energy injection from the SACLA to the SPring-8 from next year as a part of the SPring-8 upgrade. For this, we developed several I/O cards with the MTCA.4 form factor. One of the key issues is a timing synchronization between SACLA and SPring-8. We implemented required functions on the FPGA logic of a commercially available I/O card. We develop a module to distribute a trigger and clocks. We also developed cards used for the beam position monitor (BPM) and low-level RF system (LLRF). Those are included two types of cards. One is a 16-bit digitizer used for LLRF for the SPring-8 since 2018 march. We will use the card for the BPM with modified FPGA logic. Second is an implementation of functions with the pulsed RF signals processed on the FPGA logic of a commercially available card. These functions are used for the BPM of the beam transport line from the SACLA to SPring-8. The existing system is used 1 Hz beam repetition but we need more than 10 Hz to achieve an injection time less than 20 minutes to maximize user time. We will report the performance of the MTCA.4 cards, the upgrade plan of the SPring-8, and the construction of the 3 GeV Light Source.

Slides TUAPP02 [7.123 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-TUAPP02

About •

paper received ※ 01 October 2019 paper accepted ※ 20 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THAPP03

Construction of Beam Monitor Control System for Beam Transport From SACLA to SPring-8

1544

A. Kiyomichi, N. Hosoda, M. Yamaga
JASRI, Hyogo, Japan
T. Fukui
RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan
M. Ishii
JASRI/SPring-8, Hyogo-ken, Japan
H. Maesaka
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan

In a part of the SPring-8 upgrade project, the SACLA linac will be used as the injector for the SPring-8 storage ring. We will upgrade the beam monitor system for beam transport, which consists of screen monitor (SCM), beam position monitor (BPM) and current monitor (CT). For the SCM, we adopted GigE Vision standard for the CCD camera and EtherCAT as a field bus for the stepper motor control of focusing system. We have developed camera control software using open source libraries to integrate various vendors’ GigE Vision cameras with the SPring-8 control framework. A grabbed image is stored into the file server and property, such as camera settings for image and event number, is stored into the database. The BPM is a key device for precise and stable injection. We adopted the commercially available MTCA.4 fast ADC/DAC module with modified firmware developed for readout of the BPM and the CT. We are developing acquisition software for MTCA.4 modules to synchronize with a beam trigger. The acquired data are stored into the database with time stamp and event number. We present the preparation of beam monitor control system for the beam transport to injection from SACLA to SPring-8.

Slides THAPP03 [9.593 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-THAPP03

About •

paper received ※ 01 October 2019 paper accepted ※ 09 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA112

Database Scheme for On-Demand Beam Route Switching Operations at SACLA/SPring-8

1352

K. Okada, N. Hosoda, T. Ohshima, T. Sugimoto, M. Yamaga
JASRI, Hyogo, Japan
T. Fujiwara, T. Maruyama, T. Ohshima, T. Okada
RIKEN SPring-8 Center, Hyogo, Japan
T. Fukui, N. Hosoda, H. Maesaka
RIKEN SPring-8 Center, Innovative Light Sources Division, Hyogo, Japan
O. Morimoto, Y. Tajiri
SES, Hyogo-pref., Japan

At SACLA, the X-ray free electron laser (XFEL) facility, we have been operating the electron linac in time-sharing (equal duty) mode between beamlines. The next step is to vary the duty factor on an on-demand basis and to bring the beam into the SP8 storage ring. It is a part of a big picture of an upgrade*. The low-emittance beam is ideal for the next generation storage ring. In every 60 Hz repetition cycle, we have to deal a bunch of electrons properly. The challenge here is we must keep the beam quality for the XFEL demands while responding occasional injection requests from the storage ring**. This paper describes the database system that supports both SACLA/SP8 operations. The system is a combination of RDB and NoSQL databases. In the on-demand beam switching operation, the RDB part keeps the parameters to define sequences, which include a set of one-second route patterns, and a bucket sequence for the injection, etc. As for data analysis, it is going to be a post-process to build an event for a certain route, because not all equipment get the route command in real time. We present the preparation status toward the standard operation for beamline users.
*http://rsc.riken.jp/pdf/SPring-8-II.pdf
**IPAC2019 proceedings

Poster WEPHA112 [0.561 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WEPHA112

About •

paper received ※ 01 October 2019 paper accepted ※ 09 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)