IBIC2019 - List of Keywords (MEBT)

Paper	Title	Other Keywords	Page
MOPP014	Design of the ESS MEBT Faraday Cup	electron, radiation, proton, operation	106
	A. Rodríguez Páramo, I. Bustinduy, I. Mazkiaran, R. Miracoli, V. Toyos, S. Varnasseri, D. de Cos, C. de la Cruz ESS Bilbao, Zamudio, Spain E.M. Donegani, J.P.S. Martins ESS, Lund, Sweden
	The European Spallation Source (ESS) is currently under construction and the Medium Energy Beam Transfer (MEBT) is developed by ESS-Bilbao as an in-kind contribution. In the MEBT a set of diagnostics is included for beam characterization, among them the MEBT Faraday Cup is used to measure beam current and as a beam stopper for the commissioning modes. The main challenges for the design and manufacturing of the Faraday Cup are the high irradiation loads and the necessity of a compact design due to the space constraints in the MEBT. We describe the design of the FC, characterized by a graphite collector, required to withstand irradiation, and a repeller for suppression of secondary electrons. For the operation of the Faraday Cup acquisition electronics and control system are developed, all systems have been integrated in the ESS-Bilbao ECR ion source to test operation under beam conditions. In this work, we discuss the design of the Faraday Cup, the results of the tests and how they agree with the expected performance of the Faraday Cup.
	Poster MOPP014 [1.786 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP014
About •	paper received ※ 02 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPP034	Beam Instrumentation Challenges for the Fermilab PIP-II Accelerator	linac, emittance, laser, instrumentation	181
	V.E. Scarpine, N. Eddy, D. Frolov, M.A. Ibrahim, L.R. Prost, R.M. Thurman-Keup Fermilab, Batavia, Illinois, USA
	Funding: This work was supported by the U.S. Department of Energy under contract No. DE-AC02-07CH11359. Fermilab is undertaking the development of a new 800 MeV superconducting RF linac to replace it’s present normal conducting 400 MeV linac. The PIP-II linac warm front-end consists of an ion source, LEBT, RFQ and MEBT which includes an arbitrary pattern bunch chopper, to generate a 2.1 MeV, 2mA H⁻ beam. This is followed immediately by a series of superconducting RF cryomodules to produce a 800 MeV beam. Commissioning, operate and safety present challenges to the beam instrumentation. This paper describes these beam instrumentation challenges and the choices made for PIP-II.
	Poster MOPP034 [0.999 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP034
About •	paper received ※ 10 September 2019 paper accepted ※ 11 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPP036	SPIRAL2 Diagnostic Qualifications with RFQ beams	rfq, linac, emittance, diagnostics	188
	C. Jamet, T. Andre, V. Langlois, T. Le Ster, G. Ledu, P. Legallois, S. Leloir, F. Lepoittevin, S. Loret, C. Potier de courcy, R.V. Revenko GANIL, Caen, France
	The SPIRAL2 accelerator, built on the GANIL’s facility, at CAEN in FRANCE is dedicated to accelerate light and heavy ion beams up to 5mA and 40 MeV. The continuous wave accelerator is based on two ECR ion sources, a RFQ and a superconducting LINAC. The beam commissioning of the RFQ finished at the end of 2018. This paper presents the Diagnostic-Plate installed behind the RFQ, with all associated accelerator diagnostics. Diagnostic monitors, measured beam parameters, results are described and analyzed. A brief presentation of the next steps is given.
	Poster MOPP036 [1.558 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP036
About •	paper received ※ 03 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPP044	Status of the Faraday Cups for the ESS linac	LEBT, DTL, proton, linac	205
	E.M. Donegani, C.S. Derrez, T.J. Grandsaert, T.J. Shea ESS, Lund, Sweden I. Bustinduy, A. Rodríguez Páramo ESS Bilbao, Zamudio, Spain
	The European Spallation Source (ESS) will be a 5 MW pulsed neutron source, relying on a 2 GeV linac delivering 2.86 ms long pulses with 14 Hz repetition rate. During the commissioning and the tuning phases of the ESS linac, four Faraday Cups (FC) serve as beam dumps and provide an absolute measurement of the proton beam current. This contribution summarizes the challenges in the design and production of all the FCs mainly requiring: - Thermo-mechanical analysis to keep heat load and mechanical stress below the mechanical limits; - Inclusion of an electron repeller to prevent the escape of secondary charged particles from the cup that would limit the accuracy of the current measurements; - Monte Carlo simulations to compute material activation, dose at contact and corresponding necessary shielding; - Design of high-resolution detection circuits for low current to fulfill the requirements on bandwidth, gain and noise. In addition, the performance of the LEBT FC during the commissioning of the ion source and LEBT is reported. The LEBT FC system is under continuous improvement and serves as benchmark for the protection from unwanted operation, and in case of actuator or cooling faults.
	Poster MOPP044 [1.121 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP044
About •	paper received ※ 04 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP001	Study and Characterization of SPIRAL2 BPMs	simulation, linac, electron, rfq	499
	V. Langlois, T. Andre, C. Jamet, G. Ledu, P. Legallois, S. Leloir, F. Lepoittevin, M. Lewitowicz, S. Loret, C. Potier de courcy GANIL, Caen, France
	The SPIRAL2 facility currently under commissioning at GANIL in France will deliver high-intensity up to 20MeV/n and 5mA light and heavy ions beams. SPIRAL2 beams are accelerated by a Radio Frequency Quadrupole (RFQ) and a LINAC fitted with 20 supraconducting cavities. A tuning of the SPIRAL2 LINAC relies mainly on Pick-up Beam Profile Monitors (BPM). 20 BPM are mounted inside the warm sections between superconducting cavities. They serve to measure a beam transverse position to center the beam, a phase to tune cavities and an ellipticity to adjust beam optics along the LINAC. The phase and ellipticity measurements require high acquisition accuracy of the BPM signals. This paper deals with an analytical study and CST code simulations of the BPM performed in order to compute correction coefficients for the ellipticity measurements. The results of calculations were compared with experimental ones obtained with two BPMs located on a ¿diagnostic plate¿ after the RFQ . Finally, the BPM acquisition chain was carefully characterized to identify its uncertainties and to ensure that it meets initial specifications.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP001
About •	paper received ※ 04 September 2019 paper accepted ※ 09 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP013	Beam Commissioning of Beam Position and Phase Monitors for LIPAc	electron, pick-up, electronics, MMI	534
	I. Podadera, D. Gavela, A. Guirao, D. Jiménez-Rey, L.M. Martínez, J. Mollá, C. Oliver, R. Varela, V. Villamayor CIEMAT, Madrid, Spain T. Akagi, K. Kondo, Y. Shimosaki, T. Shinya, M. Sugimoto QST, Aomori, Japan L. Bellan, M. Comunian, F. Grespan, F. Scantamburlo INFN/LNL, Legnaro (PD), Italy P. Cara IFMIF/EVEDA, Rokkasho, Japan Y. Carin, H. Dzitko, D. Gex, A. Jokinen, I.M. Moya F4E, Germany A. Marqueta Fusion for Energy, Garching, Germany A. Rodríguez Páramo ESS Bilbao, Zamudio, Spain
	Funding: Work partially supported by the Spanish Ministry of Science and Innovation under project AIC-A-2011-0654 and FIS2013-40860-R The LIPAc accelerator is 9-MeV, 125-mA CW deuteron accelerator that aims to validate the technology that will be used in the future IFMIF accelerator (40-MeV, 2 x 125-mA CW). LIPAc is presently under beam commissioning of the second acceleration stage (injector and Radio Frequency Quadrupole) at 5 MeV. In this stage two types of BPM¿s are used: four stripline-type to control the transverse position and phase at the Medium Energy Beam Transport line (MEBT), and three other stripline-type mainly for the precise measurements of the mean beam energy at the Diagnostics Plate. All the BPM¿s have been successfully tested and served to increase the duty cycle and the average power of the beam delivered down to the beam dump. Moreover, the BPM¿s were key devices for the transverse beam positioning and longitudinal beam tuning and validation of the RFQ and re-buncher cavities at the MEBT. In this contribution, an overview of the beam position monitors system installation and characterization in the facility will be reported. First tests of the system with the upgraded acquisition electronics for the next phase will be also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP013
About •	paper received ※ 04 September 2019 paper accepted ※ 09 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP014	A Report on Developments of the BCM and BPM Pickups of the ESS MEBT	pick-up, quadrupole, vacuum, impedance	539
	S. Varnasseri, I. Bustinduy, A. Conde, J. Martin, A. Ortega, I. Rueda, A.Z. Zugazaga ESS Bilbao, Zamudio, Spain R.A. Baron, H. Hassanzadegan, T.J. Shea ESS, Lund, Sweden
	In the framework of the Spanish In-Kind Contribution (IKC) to the construction of the European Spallation Source (ESS-ERIC), ESS-Bilbao is in charge of providing some key systems for the accelerator. In this paper, design and pre-delivery measurements of non-interceptive devices of MEBT (e.g Beam Position Monitor pick-ups, shielded ACCT and FCT) are reported. Overall there are 8 BPMs distributed in MEBT, which 7 of them are used for the beam position and phase measurements and one BPM is used for the fast timing characterization. The latter is used mainly to characterize the partially chopped bunches and rise/fall time of the Beam Chopper. Furthermore there are two ACCTs, one just attached to the beam dump and the other at the last raft of the MEBT. One FCT combined with the second ACCT gives the complementary information on the fast timing characteristics of the beam pulses.
	Poster WEPP014 [1.291 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP014
About •	paper received ※ 02 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP033	Position Based Phase Scan	cavity, focusing, alignment, quadrupole	605
	N. Milas, M. Eshraqi, Y. Levinsen, R. Miyamoto, D.C. Plostinar ESS, Lund, Sweden Y. Liu KEK/JAEA, Ibaraki-Ken, Japan
	Knowledge of the longitudinal beam parameters is important for understanding beam dynamics in linacs. As well as with transverse optics, the settings for the RF cavities have to be established and phase and amplitude seen by the beam must be determined in order to guarantee a stable motion in the longitudinal plane. This work presents an extension of the most widely used phase scan method, relying on time-of-flight, using only transverse positions measured at a few selected BPMs downstream of the cavity being scanned. In principle, the method can be applied both to normal conducting and SC. The suggested method is fast and relatively simple and is capable to provide the values for the cavity transverse misalignment (offsets and tilts) at the same time. It can be a useful part of the initial longitudinal beam tuning.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP033
About •	paper received ※ 04 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPP014

Design of the ESS MEBT Faraday Cup

electron, radiation, proton, operation

106

A. Rodríguez Páramo, I. Bustinduy, I. Mazkiaran, R. Miracoli, V. Toyos, S. Varnasseri, D. de Cos, C. de la Cruz
ESS Bilbao, Zamudio, Spain
E.M. Donegani, J.P.S. Martins
ESS, Lund, Sweden

The European Spallation Source (ESS) is currently under construction and the Medium Energy Beam Transfer (MEBT) is developed by ESS-Bilbao as an in-kind contribution. In the MEBT a set of diagnostics is included for beam characterization, among them the MEBT Faraday Cup is used to measure beam current and as a beam stopper for the commissioning modes. The main challenges for the design and manufacturing of the Faraday Cup are the high irradiation loads and the necessity of a compact design due to the space constraints in the MEBT. We describe the design of the FC, characterized by a graphite collector, required to withstand irradiation, and a repeller for suppression of secondary electrons. For the operation of the Faraday Cup acquisition electronics and control system are developed, all systems have been integrated in the ESS-Bilbao ECR ion source to test operation under beam conditions. In this work, we discuss the design of the Faraday Cup, the results of the tests and how they agree with the expected performance of the Faraday Cup.

Poster MOPP014 [1.786 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP014

About •

paper received ※ 02 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPP034

Beam Instrumentation Challenges for the Fermilab PIP-II Accelerator

linac, emittance, laser, instrumentation

181

V.E. Scarpine, N. Eddy, D. Frolov, M.A. Ibrahim, L.R. Prost, R.M. Thurman-Keup
Fermilab, Batavia, Illinois, USA

Funding: This work was supported by the U.S. Department of Energy under contract No. DE-AC02-07CH11359.
Fermilab is undertaking the development of a new 800 MeV superconducting RF linac to replace it’s present normal conducting 400 MeV linac. The PIP-II linac warm front-end consists of an ion source, LEBT, RFQ and MEBT which includes an arbitrary pattern bunch chopper, to generate a 2.1 MeV, 2mA H⁻ beam. This is followed immediately by a series of superconducting RF cryomodules to produce a 800 MeV beam. Commissioning, operate and safety present challenges to the beam instrumentation. This paper describes these beam instrumentation challenges and the choices made for PIP-II.

Poster MOPP034 [0.999 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP034

About •

paper received ※ 10 September 2019 paper accepted ※ 11 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPP036

SPIRAL2 Diagnostic Qualifications with RFQ beams

rfq, linac, emittance, diagnostics

188

C. Jamet, T. Andre, V. Langlois, T. Le Ster, G. Ledu, P. Legallois, S. Leloir, F. Lepoittevin, S. Loret, C. Potier de courcy, R.V. Revenko
GANIL, Caen, France

The SPIRAL2 accelerator, built on the GANIL’s facility, at CAEN in FRANCE is dedicated to accelerate light and heavy ion beams up to 5mA and 40 MeV. The continuous wave accelerator is based on two ECR ion sources, a RFQ and a superconducting LINAC. The beam commissioning of the RFQ finished at the end of 2018. This paper presents the Diagnostic-Plate installed behind the RFQ, with all associated accelerator diagnostics. Diagnostic monitors, measured beam parameters, results are described and analyzed. A brief presentation of the next steps is given.

Poster MOPP036 [1.558 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP036

About •

paper received ※ 03 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPP044

Status of the Faraday Cups for the ESS linac

LEBT, DTL, proton, linac

205

E.M. Donegani, C.S. Derrez, T.J. Grandsaert, T.J. Shea
ESS, Lund, Sweden
I. Bustinduy, A. Rodríguez Páramo
ESS Bilbao, Zamudio, Spain

The European Spallation Source (ESS) will be a 5 MW pulsed neutron source, relying on a 2 GeV linac delivering 2.86 ms long pulses with 14 Hz repetition rate. During the commissioning and the tuning phases of the ESS linac, four Faraday Cups (FC) serve as beam dumps and provide an absolute measurement of the proton beam current. This contribution summarizes the challenges in the design and production of all the FCs mainly requiring: - Thermo-mechanical analysis to keep heat load and mechanical stress below the mechanical limits; - Inclusion of an electron repeller to prevent the escape of secondary charged particles from the cup that would limit the accuracy of the current measurements; - Monte Carlo simulations to compute material activation, dose at contact and corresponding necessary shielding; - Design of high-resolution detection circuits for low current to fulfill the requirements on bandwidth, gain and noise. In addition, the performance of the LEBT FC during the commissioning of the ion source and LEBT is reported. The LEBT FC system is under continuous improvement and serves as benchmark for the protection from unwanted operation, and in case of actuator or cooling faults.

Poster MOPP044 [1.121 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-MOPP044

About •

paper received ※ 04 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP001

Study and Characterization of SPIRAL2 BPMs

simulation, linac, electron, rfq

499

V. Langlois, T. Andre, C. Jamet, G. Ledu, P. Legallois, S. Leloir, F. Lepoittevin, M. Lewitowicz, S. Loret, C. Potier de courcy
GANIL, Caen, France

The SPIRAL2 facility currently under commissioning at GANIL in France will deliver high-intensity up to 20MeV/n and 5mA light and heavy ions beams. SPIRAL2 beams are accelerated by a Radio Frequency Quadrupole (RFQ) and a LINAC fitted with 20 supraconducting cavities. A tuning of the SPIRAL2 LINAC relies mainly on Pick-up Beam Profile Monitors (BPM). 20 BPM are mounted inside the warm sections between superconducting cavities. They serve to measure a beam transverse position to center the beam, a phase to tune cavities and an ellipticity to adjust beam optics along the LINAC. The phase and ellipticity measurements require high acquisition accuracy of the BPM signals. This paper deals with an analytical study and CST code simulations of the BPM performed in order to compute correction coefficients for the ellipticity measurements. The results of calculations were compared with experimental ones obtained with two BPMs located on a ¿diagnostic plate¿ after the RFQ . Finally, the BPM acquisition chain was carefully characterized to identify its uncertainties and to ensure that it meets initial specifications.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP001

About •

paper received ※ 04 September 2019 paper accepted ※ 09 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP013

Beam Commissioning of Beam Position and Phase Monitors for LIPAc

electron, pick-up, electronics, MMI

534

I. Podadera, D. Gavela, A. Guirao, D. Jiménez-Rey, L.M. Martínez, J. Mollá, C. Oliver, R. Varela, V. Villamayor
CIEMAT, Madrid, Spain
T. Akagi, K. Kondo, Y. Shimosaki, T. Shinya, M. Sugimoto
QST, Aomori, Japan
L. Bellan, M. Comunian, F. Grespan, F. Scantamburlo
INFN/LNL, Legnaro (PD), Italy
P. Cara
IFMIF/EVEDA, Rokkasho, Japan
Y. Carin, H. Dzitko, D. Gex, A. Jokinen, I.M. Moya
F4E, Germany
A. Marqueta
Fusion for Energy, Garching, Germany
A. Rodríguez Páramo
ESS Bilbao, Zamudio, Spain

Funding: Work partially supported by the Spanish Ministry of Science and Innovation under project AIC-A-2011-0654 and FIS2013-40860-R
The LIPAc accelerator is 9-MeV, 125-mA CW deuteron accelerator that aims to validate the technology that will be used in the future IFMIF accelerator (40-MeV, 2 x 125-mA CW). LIPAc is presently under beam commissioning of the second acceleration stage (injector and Radio Frequency Quadrupole) at 5 MeV. In this stage two types of BPM¿s are used: four stripline-type to control the transverse position and phase at the Medium Energy Beam Transport line (MEBT), and three other stripline-type mainly for the precise measurements of the mean beam energy at the Diagnostics Plate. All the BPM¿s have been successfully tested and served to increase the duty cycle and the average power of the beam delivered down to the beam dump. Moreover, the BPM¿s were key devices for the transverse beam positioning and longitudinal beam tuning and validation of the RFQ and re-buncher cavities at the MEBT. In this contribution, an overview of the beam position monitors system installation and characterization in the facility will be reported. First tests of the system with the upgraded acquisition electronics for the next phase will be also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP013

About •

paper received ※ 04 September 2019 paper accepted ※ 09 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP014

A Report on Developments of the BCM and BPM Pickups of the ESS MEBT

pick-up, quadrupole, vacuum, impedance

539

S. Varnasseri, I. Bustinduy, A. Conde, J. Martin, A. Ortega, I. Rueda, A.Z. Zugazaga
ESS Bilbao, Zamudio, Spain
R.A. Baron, H. Hassanzadegan, T.J. Shea
ESS, Lund, Sweden

In the framework of the Spanish In-Kind Contribution (IKC) to the construction of the European Spallation Source (ESS-ERIC), ESS-Bilbao is in charge of providing some key systems for the accelerator. In this paper, design and pre-delivery measurements of non-interceptive devices of MEBT (e.g Beam Position Monitor pick-ups, shielded ACCT and FCT) are reported. Overall there are 8 BPMs distributed in MEBT, which 7 of them are used for the beam position and phase measurements and one BPM is used for the fast timing characterization. The latter is used mainly to characterize the partially chopped bunches and rise/fall time of the Beam Chopper. Furthermore there are two ACCTs, one just attached to the beam dump and the other at the last raft of the MEBT. One FCT combined with the second ACCT gives the complementary information on the fast timing characteristics of the beam pulses.

Poster WEPP014 [1.291 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP014

About •

paper received ※ 02 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP033

Position Based Phase Scan

cavity, focusing, alignment, quadrupole

605

N. Milas, M. Eshraqi, Y. Levinsen, R. Miyamoto, D.C. Plostinar
ESS, Lund, Sweden
Y. Liu
KEK/JAEA, Ibaraki-Ken, Japan

Knowledge of the longitudinal beam parameters is important for understanding beam dynamics in linacs. As well as with transverse optics, the settings for the RF cavities have to be established and phase and amplitude seen by the beam must be determined in order to guarantee a stable motion in the longitudinal plane. This work presents an extension of the most widely used phase scan method, relying on time-of-flight, using only transverse positions measured at a few selected BPMs downstream of the cavity being scanned. In principle, the method can be applied both to normal conducting and SC. The suggested method is fast and relatively simple and is capable to provide the values for the cavity transverse misalignment (offsets and tilts) at the same time. It can be a useful part of the initial longitudinal beam tuning.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP033

About •

paper received ※ 04 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)