SRF2021 - List of Authors (Bonezzi, M.)

Paper	Title	Page
WEPTEV008	VSR Demo Cold String: Recent Developments and Manufacturing Status	647
	N. Wunderer, V. Dürr, A. Frahm, H.-W. Glock, F. Glöckner, J. Knobloch, E. Sharples-Milne, A.V. Tsakanian, A. Veléz HZB, Berlin, Germany M. Bonezzi, A. D’Ambros, R. Paparella INFN/LASA, Segrate (MI), Italy J. Guo, J. Henry, R.A. Rimmer JLab, Newport News, Virginia, USA J. Knobloch University of Siegen, Siegen, Germany A. Veléz Technical University Dortmund, Dortmund, Germany
	The BESSY VSR project aims to demonstrate the possibility to simultaneously run both long (15ps) and short bunches (1.7ps) within BESSY II storage ring. To achieve this, a new SRF cavity system with higher harmonic cavities (3 and 3.5 harm.) needs to be installed. The combined cavity SRF beating allows for stable bunch shortening for half of the buckets while standard lengths remaining for the other half. These SRF cavities will be equipped with waveguide-connected HOM absorbers and will be controlled with a blade tuner plus piezos. To demonstrate the feasibility of this complex system the VSR DEMO cold string consists of two 1.5 GHz cavities, each featuring five waveguides and a higher power coupler, plus all interconnecting elements coupled to the beam vacuum. For most of these components the fundamental development work is completed and has been reported in the past. This paper summarizes recent enhancements, component detailing and manufacturing status. The key cold string components such as cavities, higher power couplers and blade tuners have already entered the manufacturing phase. All other cold string components will be ready for purchase at the latest beginning of 2022.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-WEPTEV008
About •	Received ※ 18 June 2021 — Revised ※ 09 August 2021 — Accepted ※ 22 November 2021 — Issue date ※ 05 January 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPCAV005	Status of the INFN-LASA Contribution to the PIP-II Linac	787
	R. Paparella, M. Bertucci, M. Bonezzi, A. Bosotti, D. Cardelli, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, D. Sertore INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	The international effort for the PIP-II project at Fermilab has been joined by INFN with its planned contribution to the PIP-II proton linac in the low-beta section. INFN-LASA is finalizing its commitment to deliver in kind the full set of the LB650 cavities, 36 plus spares resonators with 5-cell cavities at 650 MHz and geometrical beta 0.61. All cavities, designed by INFN-LASA, will be produced and surface treated in industry to reach the unprecedented performances required by PIP-II, qualified through vertical cold test at state-of-the art infrastructures and delivered as ready for the linac at the string assembly site. The status of INFN contribution to PIP-II, the development of infrastructures and prototypes as well as the ongoing activities toward the start of series production are summarized in this paper.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPCAV005
About •	Received ※ 21 June 2021 — Accepted ※ 09 October 2021 — Issue date ※ 08 May 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPCAV012	ESS Medium Beta Cavities at INFN LASA	815
	D. Sertore, M. Bertucci, M. Bonezzi, A. Bosotti, D. Cardelli, A. D’Ambros, A.T. Grimaldi, L. Monaco, R. Paparella, G.M. Zaggia INFN/LASA, Segrate (MI), Italy C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	INFN Milano - LASA contributes in-kind to the ESS ERIC Superconducting Linac supplying 36 cavities for the Medium Beta section of the proton accelerator. All the cavities have been mechanical fabricated, BCP treated and, for most of them, also qualified with vertical test at cold at DESY. We present the result of the cavities already qualified and delivered to CEA, discussing the lessons learnt so far. For remaining cavities, we discuss the actions taken and the plans foreseen to recover them to full specifications.
DOI •	reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPCAV012
About •	Received ※ 21 June 2021 — Revised ※ 01 September 2021 — Accepted ※ 10 October 2021 — Issue date ※ 23 November 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

VSR Demo Cold String: Recent Developments and Manufacturing Status

647

N. Wunderer, V. Dürr, A. Frahm, H.-W. Glock, F. Glöckner, J. Knobloch, E. Sharples-Milne, A.V. Tsakanian, A. Veléz
HZB, Berlin, Germany
M. Bonezzi, A. D’Ambros, R. Paparella
INFN/LASA, Segrate (MI), Italy
J. Guo, J. Henry, R.A. Rimmer
JLab, Newport News, Virginia, USA
J. Knobloch
University of Siegen, Siegen, Germany
A. Veléz
Technical University Dortmund, Dortmund, Germany

The BESSY VSR project aims to demonstrate the possibility to simultaneously run both long (15ps) and short bunches (1.7ps) within BESSY II storage ring. To achieve this, a new SRF cavity system with higher harmonic cavities (3 and 3.5 harm.) needs to be installed. The combined cavity SRF beating allows for stable bunch shortening for half of the buckets while standard lengths remaining for the other half. These SRF cavities will be equipped with waveguide-connected HOM absorbers and will be controlled with a blade tuner plus piezos. To demonstrate the feasibility of this complex system the VSR DEMO cold string consists of two 1.5 GHz cavities, each featuring five waveguides and a higher power coupler, plus all interconnecting elements coupled to the beam vacuum. For most of these components the fundamental development work is completed and has been reported in the past. This paper summarizes recent enhancements, component detailing and manufacturing status. The key cold string components such as cavities, higher power couplers and blade tuners have already entered the manufacturing phase. All other cold string components will be ready for purchase at the latest beginning of 2022.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-WEPTEV008

About •

Received ※ 18 June 2021 — Revised ※ 09 August 2021 — Accepted ※ 22 November 2021 — Issue date ※ 05 January 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPCAV005

Status of the INFN-LASA Contribution to the PIP-II Linac

787

R. Paparella, M. Bertucci, M. Bonezzi, A. Bosotti, D. Cardelli, A. D’Ambros, A.T. Grimaldi, P. Michelato, L. Monaco, D. Sertore
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

The international effort for the PIP-II project at Fermilab has been joined by INFN with its planned contribution to the PIP-II proton linac in the low-beta section. INFN-LASA is finalizing its commitment to deliver in kind the full set of the LB650 cavities, 36 plus spares resonators with 5-cell cavities at 650 MHz and geometrical beta 0.61. All cavities, designed by INFN-LASA, will be produced and surface treated in industry to reach the unprecedented performances required by PIP-II, qualified through vertical cold test at state-of-the art infrastructures and delivered as ready for the linac at the string assembly site. The status of INFN contribution to PIP-II, the development of infrastructures and prototypes as well as the ongoing activities toward the start of series production are summarized in this paper.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPCAV005

About •

Received ※ 21 June 2021 — Accepted ※ 09 October 2021 — Issue date ※ 08 May 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPCAV012

ESS Medium Beta Cavities at INFN LASA

815

D. Sertore, M. Bertucci, M. Bonezzi, A. Bosotti, D. Cardelli, A. D’Ambros, A.T. Grimaldi, L. Monaco, R. Paparella, G.M. Zaggia
INFN/LASA, Segrate (MI), Italy
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

INFN Milano - LASA contributes in-kind to the ESS ERIC Superconducting Linac supplying 36 cavities for the Medium Beta section of the proton accelerator. All the cavities have been mechanical fabricated, BCP treated and, for most of them, also qualified with vertical test at cold at DESY. We present the result of the cavities already qualified and delivered to CEA, discussing the lessons learnt so far. For remaining cavities, we discuss the actions taken and the plans foreseen to recover them to full specifications.

DOI •

reference for this paper ※ doi:10.18429/JACoW-SRF2021-THPCAV012

About •

Received ※ 21 June 2021 — Revised ※ 01 September 2021 — Accepted ※ 10 October 2021 — Issue date ※ 23 November 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)