SRF2019 - List of Authors (Sekutowicz, J.K.)

Paper	Title	Page
MOP004	Preparation of Pb-Photocathodes at National Centre for Nuclear Research in Poland – State of the Art	25
	J. Lorkiewicz, I. Cieślik, P.J. Czuma, A.M. Kosińska, R. Nietubyć NCBJ, Świerk/Otwock, Poland J.K. Sekutowicz DESY, Hamburg, Germany
	Funding: We are currently using a financial support within "PolFEL - Polish Free Electron Laser" cofounded by the European Regional Development Fund. R&D activities related to preparation of the superconducting Pb photocathode layer on niobium substrate are ongoing at the National Centre for Nuclear Research (NCBJ) in cooperation with DESY, HZDR, HZB, BNL and other research institutes. The activities are part of the R&D program at DESY for the cw-upgrade of E-XFEL and for the newly approved free electron laser facility PolFEL to be built and operated at NCBJ. The optimization results obtained for the lead deposition on niobium and smoothing of the coated layers are reported. The photocathodes samples were tested for their surface morphology, microstructure and quantum efficiency in terms of the impact on the operation of all-superconducting RF electron injector, proposed for both facilities.
	Poster MOP004 [1.446 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP004
About •	paper received ※ 23 June 2019 paper accepted ※ 29 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP080	Status of the All Superconducting Gun Cavity at DESY	1087
	E. Vogel, S. Barbanotti, A. Brinkmann, Th. Buettner, J.I. Iversen, K. Jensch, D. Klinke, D. Kostin, W.-D. Möller, A. Muhs, J. Schaffran, M. Schmökel, J.K. Sekutowicz, S. Sievers, L. Steder, N. Steinhau-Kühl, A. Sulimov, J.H. Thie, H. Weise, M. Wenskat, M. Wiencek, L. Winkelmann, B. van der Horst DESY, Hamburg, Germany
	At DESY, the development of a 1.6-cell, 1.3 GHz all superconducting gun cavity with a lead cathode attached to its back wall is ongoing. The special features of the structure like the back wall of the half-cell and cathode hole require adaptations of the procedures used for the treatment of nine-cell TESLA cavities. Unsatisfactory test results of two prototype cavities motivated us to re-consider the back-wall design and production steps. In this contribution we present the status of the modified cavity design including accessories causing accelerating field asymmetries, like a pick up antenna located at the back wall and fundamental power- and HOM couplers. Additionally, we discuss preliminary considerations for the compensation of kicks caused by these components.
	Poster THP080 [7.365 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP080
About •	paper received ※ 20 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP092	Status of Cryomodule Testing at CMTB for CW R&D	1129
	J. Branlard, V. Ayvazyan, A. Bellandi, J. Eschke, Ç. Gümüş, D. Kostin, K.P. Przygoda, H. Schlarb, J.K. Sekutowicz DESY, Hamburg, Germany
	Cryo Module Test Bench (CMTB) is a facility to perform tests on European XFEL like superconducting accelerating modules. The 120 kW Inductive Output Tube (IOT) installed in the facility allows driving the eight superconducting cavities inside the module under test in a vector-sum or single cavity control fashion with average Continuous Wave (CW) gradients higher than 20 MV/m. The scope of these tests is to evaluate the feasibility of upgrading European XFEL to CW operation mode. Following the successful tests done on a prototype module XM-3 the initial performance results on the production module XM50 will be presented in this paper. Because of European XFEL requirements, XM50 is equipped with modified couplers that allow a variable Loaded Quality factor(QL) to values higher than 4x10⁷. A cost relevant open question is the maximum QL that can be reached while maintaining the system within the European XFEL field stability specifications of 0.01 % in amplitude and 0.01 deg in phase. Because of this, the LLRF system capability of rejecting microphonic and RF disturbances, as well as Lorentz Force Detuning (LFD) related effects in open and closed loop is of prime interest.
	Poster THP092 [1.514 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP092
About •	paper received ※ 25 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Preparation of Pb-Photocathodes at National Centre for Nuclear Research in Poland – State of the Art

25

J. Lorkiewicz, I. Cieślik, P.J. Czuma, A.M. Kosińska, R. Nietubyć
NCBJ, Świerk/Otwock, Poland
J.K. Sekutowicz
DESY, Hamburg, Germany

Funding: We are currently using a financial support within "PolFEL - Polish Free Electron Laser" cofounded by the European Regional Development Fund.
R&D activities related to preparation of the superconducting Pb photocathode layer on niobium substrate are ongoing at the National Centre for Nuclear Research (NCBJ) in cooperation with DESY, HZDR, HZB, BNL and other research institutes. The activities are part of the R&D program at DESY for the cw-upgrade of E-XFEL and for the newly approved free electron laser facility PolFEL to be built and operated at NCBJ. The optimization results obtained for the lead deposition on niobium and smoothing of the coated layers are reported. The photocathodes samples were tested for their surface morphology, microstructure and quantum efficiency in terms of the impact on the operation of all-superconducting RF electron injector, proposed for both facilities.

Poster MOP004 [1.446 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP004

About •

paper received ※ 23 June 2019 paper accepted ※ 29 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP080

Status of the All Superconducting Gun Cavity at DESY

1087

E. Vogel, S. Barbanotti, A. Brinkmann, Th. Buettner, J.I. Iversen, K. Jensch, D. Klinke, D. Kostin, W.-D. Möller, A. Muhs, J. Schaffran, M. Schmökel, J.K. Sekutowicz, S. Sievers, L. Steder, N. Steinhau-Kühl, A. Sulimov, J.H. Thie, H. Weise, M. Wenskat, M. Wiencek, L. Winkelmann, B. van der Horst
DESY, Hamburg, Germany

At DESY, the development of a 1.6-cell, 1.3 GHz all superconducting gun cavity with a lead cathode attached to its back wall is ongoing. The special features of the structure like the back wall of the half-cell and cathode hole require adaptations of the procedures used for the treatment of nine-cell TESLA cavities. Unsatisfactory test results of two prototype cavities motivated us to re-consider the back-wall design and production steps. In this contribution we present the status of the modified cavity design including accessories causing accelerating field asymmetries, like a pick up antenna located at the back wall and fundamental power- and HOM couplers. Additionally, we discuss preliminary considerations for the compensation of kicks caused by these components.

Poster THP080 [7.365 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP080

About •

paper received ※ 20 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP092

Status of Cryomodule Testing at CMTB for CW R&D

1129

J. Branlard, V. Ayvazyan, A. Bellandi, J. Eschke, Ç. Gümüş, D. Kostin, K.P. Przygoda, H. Schlarb, J.K. Sekutowicz
DESY, Hamburg, Germany

Cryo Module Test Bench (CMTB) is a facility to perform tests on European XFEL like superconducting accelerating modules. The 120 kW Inductive Output Tube (IOT) installed in the facility allows driving the eight superconducting cavities inside the module under test in a vector-sum or single cavity control fashion with average Continuous Wave (CW) gradients higher than 20 MV/m. The scope of these tests is to evaluate the feasibility of upgrading European XFEL to CW operation mode. Following the successful tests done on a prototype module XM-3 the initial performance results on the production module XM50 will be presented in this paper. Because of European XFEL requirements, XM50 is equipped with modified couplers that allow a variable Loaded Quality factor(QL) to values higher than 4x10⁷. A cost relevant open question is the maximum QL that can be reached while maintaining the system within the European XFEL field stability specifications of 0.01 % in amplitude and 0.01 deg in phase. Because of this, the LLRF system capability of rejecting microphonic and RF disturbances, as well as Lorentz Force Detuning (LFD) related effects in open and closed loop is of prime interest.

Poster THP092 [1.514 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP092

About •

paper received ※ 25 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)