INFN/LNL, Legnaro (PD), Italy
CEA-IRFU, Gif-sur-Yvette, France
University Siegen, Siegen, Germany
Riga Technical University, Riga, Latvia
HZB, Berlin, Germany
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
Slovak Academy of Sciences, Institute of Electrical Engineering, Bratislava, Slovak Republic
CERN, Meyrin, Switzerland
Nowadays, one of the main issues of the superconducting thin film resonant cavities is the Cu surface preparation. A better understanding of the impact of copper surface preparation on the morphological, superconductive (SC) and RF properties of the coating, is mandatory in order to improve the performances of superconducting cavities by coating techniques. ARIES H2020 collaboration includes a specific work package (WP15) to study the influence of Cu surface polishing on the SRF performances of Nb coatings that involves a team of 8 research groups from 7 different countries. In the present work, a comparison of 4 different polishing processes for Cu (Tumbling, EP, SUBU, EP+SUBU) is presented through the evaluation of the SC and morphological properties of Nb thin film coated on Cu planar samples and QPR samples, polished with different procedures. Effects of laser annealing on Nb thin films have also been studied. Different surface characterizations have been applied: roughness measurements, SEM, EDS, XRD, AFM, and thermal and photo-stimulated exoelectrons measurements. SC properties were evaluated with PPMS, and QPR measurements will be carry out at HZB in the beginning of 2019.
University Siegen, Siegen, Germany
Slovak Academy of Sciences, Institute of Electrical Engineering, Bratislava, Slovak Republic
As part of efforts to improve the performance of SRF cavities, to that prescribed by future operating requirements, alternative materials are currently being investigated. NbN is one of the alternatives under investigation to provide these better performance figures. In this contribution, a summary of results from an investigation into DC magnetron sputtered NbN thin films deposited onto copper substrates is presented. The copper substrates were prepared using a mechanical polishing process, followed by a chemical etching process. The NbN films were prepared in a large scale commercial coating system. A high and low value for the substrate temperature, process pressure, bias voltage, cathode power, nitrogen gas percentage, and the working gas type, using either Argon or Krypton, constitute the parameters of this study. The base pressure of the system prior to deposition was 5x107 hPa for all coatings. The resulting films have been characterised using various surface characterisation methods to determine the effects of the deposition parameters during the film growth process. The deposition parameters have been optimised based on the characterisation results.