SRF2019 - List of Authors (Pattalwar, S.M.)

Paper	Title	Page
MOP099	Design of Crab Cavity Cryomodule for HL-LHC	320
	T. Capelli, K. Artoos, A.B. Boucherie, K. Brodzinski, R. Calaga, S.J. Calvo, E. Cano-Pleite, O. Capatina, F. Carra, L. Dassa, F. Eriksson, M. Garlasché, A. Krawczyk, R. Leuxe, P. Minginette, E. Montesinos, B. Prochal, M. Sosin, M. Therasse CERN, Geneva, Switzerland T.J. Jones, N. Templeton STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom A. Krawczyk, B. Prochal IFJ-PAN, Kraków, Poland S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
	Funding: Research supported by the HL-LHC project Crab cavities are a key element to achieve the HL-LHC performance goals. There are two types of cavities Double Quarter Wave (DQW) for vertical crabbing, and Radiofrequency Dipole (RFD) for horizontal crabbing. Cavities are hosted in a cryomodule to provide optimal conditions for their operation at 2K while minimizing the external thermal loads and stray magnetic fields. One crab cryomodule contains more than thirteen thousand components and the assembly procedure for the first DQW prototype was carefully planned and executed. It was installed in the SPS accelerator at CERN in 2018 and successfully tested with proton beams. A review has thus been performed right after completion of the assembly in order to gather all the experience acquired and improve accordingly the design of the next generation of crab cryomodules. A second cryomodule with two RFD cavities is currently under production. This paper presents the lessons learnt from the first assembly and their implementation to the design of the future crab cryomodules.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP099
About •	paper received ※ 21 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP070	The SRF Thin Film Test Facility in LHe-Free Cryostat	610
	O.B. Malyshev, J.A. Conlon, P. Goudket, N. Pattalwar, S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom G. Burt Cockcroft Institute, Warrington, Cheshire, United Kingdom G. Burt Lancaster University, Lancaster, United Kingdom
	An ongoing programme of development superconducting thin film coating for SRF cavities requires a facility for a quick sample evaluation at the RF conditions. One of the key specifications is a simplicity of the testing procedure, allowing an easy installation and quick turnover of the testing samples. Choked test cavities operating at 7.8 GHz with three RF chokes have been designed and tested at DL in a LHe cryostat verifying that the system could perform as required. Having a sample and a cavity physically separate reduces the complexity involved in changing samples (major causes of low throughput rate and high running costs for other test cavities) and also allows direct measurement of the RF power dissipated in the sample via power calorimetry. However, changing a sample and preparation for a test requires about two-week effort per sample. In order to simplify the measurements and achieve a faster turnaround, a new cryostat cooled with a closed-cycle refrigerator has been designed, built and tested. Changing a sample, cooling down and testing can be reduced to 2-3 days per sample. Detailed design and results of testing of this facility will be reported at the conference.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP070
About •	paper received ※ 21 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP027	Cryogenics Performance of the Vertical Cryostat for Qualifying ESS-SRF High Beta Cavities	895
	S.M. Pattalwar, R.K. Buckley, P.C. Hornickel, K.J. Middleman, M.D. Pendleton, P. Pizzol, P.A. Smith, T.M. Weston, A.E. Wheelhouse, S. Wilde STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom A.J. May, A. Oates, J.T.G. Wilson STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
	An innovative vertical cryostat has been developed and commissioned at STFC Daresbury Laboratory for qualifying the high-beta SRF cavities for the ESS (European Spallation Source). The cryostat is designed to test 3 dressed cavities in horizontal configuration in one cold run at 2K. The cavities are cooled to 2K with superfluid liquid helium filled into individual helium jackets of the cavities. This reduces the liquid helium consumption by more than 70% in comparison with the conventional vertical tests. The paper describes the cryogenic system and its performance with detail discussions on the initial results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP027
About •	paper received ※ 22 June 2019 paper accepted ※ 03 July 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP048	Characterization of Flat Multilayer Thin Film Superconductors	968
SUSP037	use link to see paper's listing under its alternate paper code
	D. Turner, A.J. May STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom G. Burt, L. Gurran Cockcroft Institute, Lancaster University, Lancaster, United Kingdom K.D. Dumbell, N. Pattalwar, S.M. Pattalwar STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom T. Junginger, O.B. Malyshev Cockcroft Institute, Warrington, Cheshire, United Kingdom
	The maximum accelerating gradient of SRF cavities can be increased by raising the field of initial flux penetration, Hvp. Thin alternating layers of superconductors and insulators (SIS) can potentially increase Hvp. Magnetometry is commercially available but consists of limitations, such as SQUID measurements apply a field over both superconducting layers, so Hvp through the sample cannot be measured. If SIS structures are to be investigated a magnetic field must be applied locally, from one plane of the sample, with no magnetic field on the opposing side to allow Hvp to be measured. A magnetic field penetration experiment has been developed at Daresbury laboratory, where a VTI has been created for a cryostat where Hvp of a sample can be measured. The VTI has been designed to allow flat samples to be measured to reduce limitations such as edge effects by creating a DC magnetic field smaller than the sample. A small, parallel magnetic field is produced on the sample by the use of a ferrite yoke. The field is increased to determine Hvp by using 2 hall probes either side of the sample.
	Poster THP048 [0.327 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP048
About •	paper received ※ 23 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design of Crab Cavity Cryomodule for HL-LHC

320

T. Capelli, K. Artoos, A.B. Boucherie, K. Brodzinski, R. Calaga, S.J. Calvo, E. Cano-Pleite, O. Capatina, F. Carra, L. Dassa, F. Eriksson, M. Garlasché, A. Krawczyk, R. Leuxe, P. Minginette, E. Montesinos, B. Prochal, M. Sosin, M. Therasse
CERN, Geneva, Switzerland
T.J. Jones, N. Templeton
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
A. Krawczyk, B. Prochal
IFJ-PAN, Kraków, Poland
S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom

Funding: Research supported by the HL-LHC project
Crab cavities are a key element to achieve the HL-LHC performance goals. There are two types of cavities Double Quarter Wave (DQW) for vertical crabbing, and Radiofrequency Dipole (RFD) for horizontal crabbing. Cavities are hosted in a cryomodule to provide optimal conditions for their operation at 2K while minimizing the external thermal loads and stray magnetic fields. One crab cryomodule contains more than thirteen thousand components and the assembly procedure for the first DQW prototype was carefully planned and executed. It was installed in the SPS accelerator at CERN in 2018 and successfully tested with proton beams. A review has thus been performed right after completion of the assembly in order to gather all the experience acquired and improve accordingly the design of the next generation of crab cryomodules. A second cryomodule with two RFD cavities is currently under production. This paper presents the lessons learnt from the first assembly and their implementation to the design of the future crab cryomodules.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP099

About •

paper received ※ 21 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUP070

The SRF Thin Film Test Facility in LHe-Free Cryostat

610

O.B. Malyshev, J.A. Conlon, P. Goudket, N. Pattalwar, S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
G. Burt
Cockcroft Institute, Warrington, Cheshire, United Kingdom
G. Burt
Lancaster University, Lancaster, United Kingdom

An ongoing programme of development superconducting thin film coating for SRF cavities requires a facility for a quick sample evaluation at the RF conditions. One of the key specifications is a simplicity of the testing procedure, allowing an easy installation and quick turnover of the testing samples. Choked test cavities operating at 7.8 GHz with three RF chokes have been designed and tested at DL in a LHe cryostat verifying that the system could perform as required. Having a sample and a cavity physically separate reduces the complexity involved in changing samples (major causes of low throughput rate and high running costs for other test cavities) and also allows direct measurement of the RF power dissipated in the sample via power calorimetry. However, changing a sample and preparation for a test requires about two-week effort per sample. In order to simplify the measurements and achieve a faster turnaround, a new cryostat cooled with a closed-cycle refrigerator has been designed, built and tested. Changing a sample, cooling down and testing can be reduced to 2-3 days per sample. Detailed design and results of testing of this facility will be reported at the conference.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-TUP070

About •

paper received ※ 21 June 2019 paper accepted ※ 02 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP027

Cryogenics Performance of the Vertical Cryostat for Qualifying ESS-SRF High Beta Cavities

895

S.M. Pattalwar, R.K. Buckley, P.C. Hornickel, K.J. Middleman, M.D. Pendleton, P. Pizzol, P.A. Smith, T.M. Weston, A.E. Wheelhouse, S. Wilde
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
A.J. May, A. Oates, J.T.G. Wilson
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom

An innovative vertical cryostat has been developed and commissioned at STFC Daresbury Laboratory for qualifying the high-beta SRF cavities for the ESS (European Spallation Source). The cryostat is designed to test 3 dressed cavities in horizontal configuration in one cold run at 2K. The cavities are cooled to 2K with superfluid liquid helium filled into individual helium jackets of the cavities. This reduces the liquid helium consumption by more than 70% in comparison with the conventional vertical tests. The paper describes the cryogenic system and its performance with detail discussions on the initial results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP027

About •

paper received ※ 22 June 2019 paper accepted ※ 03 July 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP048

Characterization of Flat Multilayer Thin Film Superconductors

968

SUSP037

use link to see paper's listing under its alternate paper code

D. Turner, A.J. May
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
G. Burt, L. Gurran
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
K.D. Dumbell, N. Pattalwar, S.M. Pattalwar
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
T. Junginger, O.B. Malyshev
Cockcroft Institute, Warrington, Cheshire, United Kingdom

The maximum accelerating gradient of SRF cavities can be increased by raising the field of initial flux penetration, Hvp. Thin alternating layers of superconductors and insulators (SIS) can potentially increase Hvp. Magnetometry is commercially available but consists of limitations, such as SQUID measurements apply a field over both superconducting layers, so Hvp through the sample cannot be measured. If SIS structures are to be investigated a magnetic field must be applied locally, from one plane of the sample, with no magnetic field on the opposing side to allow Hvp to be measured. A magnetic field penetration experiment has been developed at Daresbury laboratory, where a VTI has been created for a cryostat where Hvp of a sample can be measured. The VTI has been designed to allow flat samples to be measured to reduce limitations such as edge effects by creating a DC magnetic field smaller than the sample. A small, parallel magnetic field is produced on the sample by the use of a ferrite yoke. The field is increased to determine Hvp by using 2 hall probes either side of the sample.

Poster THP048 [0.327 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-THP048

About •

paper received ※ 23 June 2019 paper accepted ※ 30 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)