SRF2019 - List of Authors (Jeromin, A.)

Paper	Title	Page
MOP025	Cavity Cut-out Studies of a 1.3 GHz Single-cell Cavity After a Failed Nitrogen Infusion Process	87
	M. Wenskat, C. Bate, T.F. Keller, D. Reschke DESY, Hamburg, Germany C. Bate University of Hamburg, Hamburg, Germany A. Jeromin DESY Nanolab, FS-NL, Hamburg, Germany J. Knobloch, F. Kramer, O. Kugeler, J.M. Köszegi HZB, Berlin, Germany J. Knobloch University of Siegen, Siegen, Germany
	Funding: This work was supported by the Helmholtz Association within the topic Accelerator Research and Development (ARD) of the Matter and Technologies (MT) Program and by the BMBF under the research grant 05H18GURB1. R&D on the nitrogen infusion process at DESY produced at the beginning a series of 1.3 GHz single-cell cavities which have shown severe deterioration in the vertical cold test which was completely unexpected and could not be explained. To investigate the reason for the deterioration, one of those cavities was optically inspected and a T- and H-Map test was done in collaboration with HZB. Together with 2nd Sound data, regions of interests were identified and cut from the cavity. Subsequent surface analysis techniques (SEM/EDX, SIMS, PIXE, EBSD, DB-PAS, PALS, XPS) were applied in order to identify the reason for the deterioration. Especially the differences between hot and cold spots as well as quench spots identified by T-Mapping were investigated.
	Poster MOP025 [0.975 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP025
About •	paper received ※ 20 June 2019 paper accepted ※ 29 June 2019 issue date ※ 14 August 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Cavity Cut-out Studies of a 1.3 GHz Single-cell Cavity After a Failed Nitrogen Infusion Process

87

M. Wenskat, C. Bate, T.F. Keller, D. Reschke
DESY, Hamburg, Germany
C. Bate
University of Hamburg, Hamburg, Germany
A. Jeromin
DESY Nanolab, FS-NL, Hamburg, Germany
J. Knobloch, F. Kramer, O. Kugeler, J.M. Köszegi
HZB, Berlin, Germany
J. Knobloch
University of Siegen, Siegen, Germany

Funding: This work was supported by the Helmholtz Association within the topic Accelerator Research and Development (ARD) of the Matter and Technologies (MT) Program and by the BMBF under the research grant 05H18GURB1.
R&D on the nitrogen infusion process at DESY produced at the beginning a series of 1.3 GHz single-cell cavities which have shown severe deterioration in the vertical cold test which was completely unexpected and could not be explained. To investigate the reason for the deterioration, one of those cavities was optically inspected and a T- and H-Map test was done in collaboration with HZB. Together with 2nd Sound data, regions of interests were identified and cut from the cavity. Subsequent surface analysis techniques (SEM/EDX, SIMS, PIXE, EBSD, DB-PAS, PALS, XPS) were applied in order to identify the reason for the deterioration. Especially the differences between hot and cold spots as well as quench spots identified by T-Mapping were investigated.

Poster MOP025 [0.975 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-SRF2019-MOP025

About •

paper received ※ 20 June 2019 paper accepted ※ 29 June 2019 issue date ※ 14 August 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)