Keyword: wakefield
Paper Title Other Keywords Page
MOPB004 Lowest Longitudinal and Transverse Resistive-wall Wake and Impedance for Nonultra-relativistic Beams dipole, impedance, electron, space-charge 21
 
  • J.Z. Tang
    TUB, Beijing, People’s Republic of China
 
  With the development of the steady-state microbunch(SSMB) storage ring, its parameters reveal that the ultra-relativistic assumption which is wildly used is not valid for the electron beam bunch train. For a bunch train with a length in the 100nm range, spacing of 1um, and energy in the hundred MeV range, the action angle of the space charge force is estimated by {r/γ}. The space charge effect of the mirror current loop formed in the wall with a scale of 1cm will have a sustained effect on approximately dozens of microbunches behind the source particle. The strength of the interaction between such bunches and the potential instability it may cause needs careful evaluation. At the same time, the effect of the space charge inside a single bunch due to space charge effect also needs to be considered. We reorganized the lowest-order longitudinal wakefield under non-extreme relativistic conditions, and modified the inconsistent part in the theoretical derivation in some essays of the lowest-order transverse wakefield. We present the modified theoretical results and analysis. The action area are then divided into three parts. It lays foundation in future research.  
poster icon Poster MOPB004 [1.278 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SAP2023-MOPB004  
About • Received ※ 30 June 2023 — Revised ※ 08 July 2023 — Accepted ※ 11 July 2023 — Issued ※ 22 November 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPB028 Investigation on the Trapped Modes of CPMU at HEPS damping, impedance, synchrotron, simulation 62
 
  • S. Yue, J.T. Li, S.K. Tian, N. Wang
    IHEP, Beijing, People’s Republic of China
 
  The Cryogenic Permanent Magnet Undulator (CPMU) is a crucial component in synchrotron radiation sources. Due to the small magnet gap of CPMU, the interaction between the beam and its surroundings is strong, which can result in a significant contribution to coupling impedance. In this work, the influence of CPMU on coupling impedance was investigated using wakefield and eigenmode solvers. The results indicated that some of the transverse impedance resonances in CPMU were much stronger than the impedance threshold determined by synchrotron radiation damping, which could cause vertical beam instability. To address this issue, different types of damping materials were investigated through simulations to suppress the resonances.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SAP2023-MOPB028  
About • Received ※ 10 July 2023 — Revised ※ 11 July 2023 — Accepted ※ 12 July 2023 — Issued ※ 01 October 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPB029 Wakefield Studies for the Step Structure and the Skin Depth of Coated Dielectric Tubes electron, impedance, FEL, simulation 147
 
  • H. Liu
    SINAP, Shanghai, People’s Republic of China
  • S. Chen, H.X. Deng, B. Liu, Y.M. Wen
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
  • J.J. Guo
    Zhangjiang Lab, Shanghai, People’s Republic of China
 
  Funding: This work was supported by YSBR-042, 12125508, 11935020, 21XD1404100 and JCYJ-SHFY-2021-010.
Wakefield issues are always important research objects in free electron laser (FEL) facilities. Since the wakefield in free electron laser facilities usually leads to a decrease of FEL performance, the research of the wakefield impacts is of great significance. Step structures are almost ubiquitous in the overall undulator section of an FEL facility, which always generate critical wakefields. In this paper, we systematically analyze and summarize the wakefield characteristics of step structures including the step-in structure and the step-out structure. In addition, the skin depth issue of the wakefield is still controversial. We study the skin depth of the wakefield field in the vacuum chamber of the kicker in the SHINE, which is made of the dielectric pipe. We proposed the conception of ¿effective skin depth¿ from two different perspectives and wrote simulation codes to calculate the ¿effective skin depth¿. We hope these methods could provide new mentalities for related research in the future.
 
poster icon Poster TUPB029 [0.392 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SAP2023-TUPB029  
About • Received ※ 30 June 2023 — Revised ※ 09 July 2023 — Accepted ※ 12 July 2023 — Issued ※ 21 September 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPB033 Heating Estimation of Undulator Vacuum Chamber at S3FEL electron, vacuum, undulator, impedance 151
 
  • H. Yi
    IASF, Shenzhen, Guangdong, People’s Republic of China
  • X.F. Wang
    Institute of Advanced Science Facilities, Shenzhen, People’s Republic of China
  • X.M. Yang, W.Q. Zhang
    DICP, Dalian, Liaoning, People’s Republic of China
 
  Heating of the vacuum chambers are unavoidable when electron beams pass through the chamber channels at relativistic speeds. In the undulator vacuum chambers, such effects might lead to temperature increase of the magnets and eventually cause degradations in the FEL lasing process. Thus, in this paper, the heating of the undulator vacuum chambers at S3FEL due to wake field effects and spontaneous synchrotron radiation are estimated using an analytical approach. For the wake field effects, the contribution from finite conductivity of the vacuum chamber material and from the inner surface roughness are considered. A electron beam profile from a start-to-end simulation is used to calculate the total wake field and the induced heat. For the synchrotron radiation, a simple analytical expression is used.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SAP2023-TUPB033  
About • Received ※ 05 July 2023 — Revised ※ 09 July 2023 — Accepted ※ 12 July 2023 — Issued ※ 26 September 2024
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)