RuPAC2021 - List of Authors (Efremov, A.A.)

Paper	Title	Page
TUPSB35	3D Simulation Study and Optimization of Magnetic System of DECRIS Ion Source with the Pumping Frequency 28 GHz	300
	V.M. Amoskov, E.I. Gapionok, V.P. Kukhtin, A.N. Labusov, E.A. Lamzin, A. Makarov, I.Yu. Rodin, A.V. Safonov, N. Shatil, D.B. Stepanov, E.R. Zapretilina NIIEFA, St. Petersburg, Russia S.L. Bogomolov, A.A. Efremov JINR, Dubna, Moscow Region, Russia S.E. Sytchevsky Saint Petersburg State University, Saint Petersburg, Russia
	A superconducting magnet system for a 28 GHz ECR ion source DECRIS-SC2 was studied in order to select its parameters and optimize performance. Parametric magnetic models were performed for two design configurations, conventional ("sextupole-in-solenoid") and reversed ("solenoid-in-sextupole"). In the "sextupole-in-solenoid" design the racetrack coils of the sextupole magnet used for radial plasma confinement are located inside the solenoids producing the axial field. In the "solenoid-in-sextupole" design the coils arrangement is reversed. For both configurations, electromagnetic effect the booster and the steel poles on the magnet performance was investigated from the point of view critical parameters of the system ¿ currents, fields, and forces. Results of the parametric computations were used to optimize the geometry and sizes of the magnet as well as the magnetic shield, the booster, and the poles. For better reliability and validation of the result, computations were performed with two magnetostatic codes, KOMPOT and KLONDIKE, utilizing the differential and integral formulations, respectively. A comparison of the obtained parameters was used to select the candidate magnet configuration for further design and manufacture.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUPSB35
About •	Received ※ 28 September 2021 — Revised ※ 29 September 2021 — Accepted ※ 04 October 2021 — Issued ※ 18 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPSB36	High Intensity Calcium, Chromium and Titanium Ion Beams from the Permanent Magnet ECR Ion Source DECRIS-PM	303
	D.K. Pugachev, S.L. Bogomolov, A.E. Bondarchenko, A.A. Efremov, K. Gikal, K.I. Kuzmenkov, V.N. Loginov, V. Mironov JINR, Dubna, Moscow Region, Russia A.A. Protasov JINR/FLNR, Moscow region, Russia
	The first experiment at the Super Heavy Elements Factory (SHE) was launched at the end of 2020. The result of the experiment with a calcium ion beam and an Americium target is more than 100 events of the synthesis of Moscovium. The last two years have shown good capabilities of the Factory. These results allow us to start preparing for the synthesis of SHE with atomic number >118. For this experiment, we have to use heavier ion beams, such as titanium and chromium. The article describes the method, technique, and last experimental results on the production of metal ion beams such as 48Ca, 48Ti, 52Cr, and 54Cr ion beams at the DC-280 cyclotron from the DECRIS-PM ion source.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUPSB36
About •	Received ※ 13 September 2021 — Revised ※ 25 September 2021 — Accepted ※ 29 September 2021 — Issued ※ 05 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPSB37	Modernization of the ECR Ion Source DECRIS-2M. Results of the First Tests.	307
	A.E. Bondarchenko, S.L. Bogomolov, A.A. Efremov, V.N. Loginov, V. Mironov, D.K. Pugachev JINR, Dubna, Moscow Region, Russia
	The article describes the design of the modernized ECR ion source DECRIS-2M. The upgrade consists in increasing the magnetic field to improve plasma confinement and improve the source parameters. The modernization also made it possible to increase the inner diameter of the plasma chamber and replace the coaxial microwave power input by a waveguide. Redesigned injection chamber significantly expands the possibilities of production ions of solids using different methods. The article also presents the first results of experiments production of Ar, Xe and Bi ion beams from a modernized ion source. The results demonstrate substantial increase of the ion beams intensity.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUPSB37
About •	Received ※ 06 September 2021 — Revised ※ 21 September 2021 — Accepted ※ 23 September 2021 — Issued ※ 18 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

3D Simulation Study and Optimization of Magnetic System of DECRIS Ion Source with the Pumping Frequency 28 GHz

300

V.M. Amoskov, E.I. Gapionok, V.P. Kukhtin, A.N. Labusov, E.A. Lamzin, A. Makarov, I.Yu. Rodin, A.V. Safonov, N. Shatil, D.B. Stepanov, E.R. Zapretilina
NIIEFA, St. Petersburg, Russia
S.L. Bogomolov, A.A. Efremov
JINR, Dubna, Moscow Region, Russia
S.E. Sytchevsky
Saint Petersburg State University, Saint Petersburg, Russia

A superconducting magnet system for a 28 GHz ECR ion source DECRIS-SC2 was studied in order to select its parameters and optimize performance. Parametric magnetic models were performed for two design configurations, conventional ("sextupole-in-solenoid") and reversed ("solenoid-in-sextupole"). In the "sextupole-in-solenoid" design the racetrack coils of the sextupole magnet used for radial plasma confinement are located inside the solenoids producing the axial field. In the "solenoid-in-sextupole" design the coils arrangement is reversed. For both configurations, electromagnetic effect the booster and the steel poles on the magnet performance was investigated from the point of view critical parameters of the system ¿ currents, fields, and forces. Results of the parametric computations were used to optimize the geometry and sizes of the magnet as well as the magnetic shield, the booster, and the poles. For better reliability and validation of the result, computations were performed with two magnetostatic codes, KOMPOT and KLONDIKE, utilizing the differential and integral formulations, respectively. A comparison of the obtained parameters was used to select the candidate magnet configuration for further design and manufacture.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUPSB35

About •

Received ※ 28 September 2021 — Revised ※ 29 September 2021 — Accepted ※ 04 October 2021 — Issued ※ 18 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPSB36

High Intensity Calcium, Chromium and Titanium Ion Beams from the Permanent Magnet ECR Ion Source DECRIS-PM

303

D.K. Pugachev, S.L. Bogomolov, A.E. Bondarchenko, A.A. Efremov, K. Gikal, K.I. Kuzmenkov, V.N. Loginov, V. Mironov
JINR, Dubna, Moscow Region, Russia
A.A. Protasov
JINR/FLNR, Moscow region, Russia

The first experiment at the Super Heavy Elements Factory (SHE) was launched at the end of 2020. The result of the experiment with a calcium ion beam and an Americium target is more than 100 events of the synthesis of Moscovium. The last two years have shown good capabilities of the Factory. These results allow us to start preparing for the synthesis of SHE with atomic number >118. For this experiment, we have to use heavier ion beams, such as titanium and chromium. The article describes the method, technique, and last experimental results on the production of metal ion beams such as 48Ca, 48Ti, 52Cr, and 54Cr ion beams at the DC-280 cyclotron from the DECRIS-PM ion source.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUPSB36

About •

Received ※ 13 September 2021 — Revised ※ 25 September 2021 — Accepted ※ 29 September 2021 — Issued ※ 05 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPSB37

Modernization of the ECR Ion Source DECRIS-2M. Results of the First Tests.

307

A.E. Bondarchenko, S.L. Bogomolov, A.A. Efremov, V.N. Loginov, V. Mironov, D.K. Pugachev
JINR, Dubna, Moscow Region, Russia

The article describes the design of the modernized ECR ion source DECRIS-2M. The upgrade consists in increasing the magnetic field to improve plasma confinement and improve the source parameters. The modernization also made it possible to increase the inner diameter of the plasma chamber and replace the coaxial microwave power input by a waveguide. Redesigned injection chamber significantly expands the possibilities of production ions of solids using different methods. The article also presents the first results of experiments production of Ar, Xe and Bi ion beams from a modernized ion source. The results demonstrate substantial increase of the ion beams intensity.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUPSB37

About •

Received ※ 06 September 2021 — Revised ※ 21 September 2021 — Accepted ※ 23 September 2021 — Issued ※ 18 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)