Paper | Title | Page |
---|---|---|
WEXMH01 | Feeding BINP Colliders with the New VEPP-5 Injection Complex | 56 |
|
||
VEPP-4 and VEPP-2000 e+e− colliders are switching to feed from VEPP-5 Injection Complex via newly constructed K-500 beam transfer line. Since first operation of K-500 at the end of 2015 injection complex delivered e+ and e- beams to VEPP-2000 facility and is getting ready to work with VEPP-4. Upgraded injection chain demonstrated ability to provide design luminosity toVEPP-2000 and techniques of reliable operation are now under development. The designand operation experience of Injection Complex and transfer lines will be presented. | ||
![]() |
Slides WEXMH01 [6.228 MB] | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WECBMH02 | Collector Ring Project at FAIR: Present Status | 86 |
|
||
In November 2013, the FAIR management delegated the responsibility for the technical design, construction, installation, and commissioning of the whole CR and its components from GSI to Budker Institute of Nuclear Physics (BINP). Since that time a lot of modifications of the original design were made aiming to improve the beam parameters and the machine performance. This work shows the present status of the development. | ||
![]() |
Slides WECBMH02 [20.497 MB] | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPSA001 | Commissioning of e+/e− Transfer Line from BINP Injection Complex to VEPP-2000 Facility | 213 |
|
||
Funding: The work is supported by the Ministry of Education and Science of the Russian Federation and by grant NSh-10088.2016.2. Commissioning of e+/e− transfer line from Injection Complex to VEPP-2000 facility is done in 2016. Both electrons and positrons beams are injected to VEPP-2000 collider. The channel layout, lattice functions, magnetic elements, beam diagnostic system, vacuum system and control system are presented in this article. The details of commissioning process are also mentioned. |
||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THPSC014 | Fast Kicker for High Current Electron Beam Manipulation in Large Aperture | 569 |
|
||
Pulsed deflecting magnet (kicker) project was worked out in BINP (Budker Institute of Nuclear Physics). The kicker design task is: impulsive force value is 1 mT*m, pulse edge is 5 ns, and impulse duration is about 200 ns. The unconventional approach is for plates to be substituted by a set of cylinders. Obtained magnet construction allows controlling field homogeneity by changing currents magnitudes in cylinders. Furthermore we demonstrated the method of field optimization. In addition the harmonic components measurement technique was considered and the possibility to control harmonic components value was shown. | ||
![]() |
Poster THPSC014 [2.155 MB] | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |