Paper | Title | Page |
---|---|---|
TUXMH02 | Novosibirsk Free Electron Laser: Terahertz and Infrared Coherent Radiation Source | 16 |
|
||
Funding: This work was supported by Russian Science Foundation (project N 14-50-00080). High-power free electron laser (FEL) facility NovoFEL has been created at Budker INP. Its wavelength can be tuned over a wide range in terahertz and infrared spectrum regions. As a source of electron bunches this FEL uses multi-turn energy recovery linac which has five straight sections. Three sections are used for three FELs which operate in different wavelength ranges (the first one - 90-240 microns, the second - 37-80 microns and the third - 5-20 microns). The first and the second FELs were commissioned in 2003 and 2009 respectively. They operate for users now. The third FEL is installed on forth accelerator track which is the last one and electron energy is maximal here. It comprises three undulator sections and 40 m optical cavity. The first lasing of this FEL was obtained in summer, 2015. The radiation wavelength was 9 microns and average power was about 100 watts. The designed power is 1 kilowatt at repetition rate 3.75 MHz. Radiation of third FEL has been delivered to user stations recently. The third FEL commissioning results as well as current status of the first and second FELs and future development prospects are presented. |
||
![]() |
Slides TUXMH02 [26.379 MB] | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUCAMH02 | CW 100 mA Electron RF Gun for Novosibirsk ERL FEL | 24 |
|
||
Funding: Grant 14-50-00080 of the Russian Science Foundation Continuous wave (CW) 100 mA electron RF gun for injecting the high-quality 300-400 keV electron beam in Novosibirsk microtron recuperator (ERL) and driving Free Electron Laser (FEL) was developed, built, and commissioned at BINP SB RAS. The RF gun consists of normal conducting 90 MHz RF cavity with a gridded thermionic cathode unit. Bench tests of rf gun is confirmed good results in strict accordance with the calculations. The gun was tested up to the design specifications at a test bench that includes a diagnostics beam line. The rf gun stand testing showed reliable work, unpretentious for vacuum conditions and stable in long-term operation. The design features of different components of the gun are presented. Preparation and commissioning experience is discussed. The beam test results are summarized. |
||
![]() |
Slides TUCAMH02 [2.764 MB] | |
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPSA050 | Electron Beam Stability in the Energy Recovery Linac for the Lithographic Free Electron Laser | 319 |
|
||
According to microelectronic production leaders the lithography based on the free electron laser (FEL) could become the main technology for the elements mass production with scale to 5 nm in the nearest future. One of the main problem is the absence of the working FEL with required parameters. The feasibility study of those FEL based on superconducting energy-recovery linac (ERL) was made in Budker INP. The ERL average current is limited by longitudinal and transverse instabilities, caused by interaction between electron beam and its induced fields in the superconducting cavities. The estimations of the threshold currents and ERL parameters were made. | ||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPSA054 |
The Test Results for the Prototype of Variable Period Undulator | |
|
||
Funding: This work was supported by grant 14-12-00480 of the Russian Science Foundation. The development of the permanent-magnet variable-period undulator (VPU) is aimed at improving the parameters of the Novosibirsk free electron laser (FEL). The key features of this design are the possibility of increasing the number of poles for shorter periods with constant undulator length and wider radiation wavelength tuning range as compared with conventional undulators. As the idea of the permanent-magnet VPU has not been properly tested yet, there are several issues to be solved before THE manufacture of the device. Two short prototypes of the VPU were made for the purpose of testing solutions to existing problems. We present here the results of mechanical and magnetic measurements of the undulator prototypes and compare the characteristics of the prototypes with those predicted by simulations. |
||
Export • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |