Paper |
Title |
Page |
THPSC006 |
Simulation of Precision Magnetic Shielding System for Beam Injectors in Tokamaks |
550 |
|
- A.M. Bazarov, V.M. Amoskov, V.A. Belyakov, E.I. Gapionok, V.P. Kukhtin, E.A. Lamzin, S.E. Sytchevsky
NIIEFA, St. Petersburg, Russia
- V.A. Belyakov, S.E. Sytchevsky
Saint Petersburg State University, Saint Petersburg, Russia
- Y. Gribov
ITER Organization, St. Paul lez Durance, France
|
|
|
Beam injectors in tokamaks are utilized for plasma heating and diagnostics. Due to the relatively large distance between the injectors and plasma, the tokamak stray magnetic field inside injectors during the operation should be very low (down to the tenths of Gauss) to avoid the deflection of the ion beams. The Magnetic Field Reduction System (MFRS) should be used to reduce the stray magnetic field produced by the tokamak EM systems and plasma to an acceptable level inside the injectors. In total, the complex MFRS can consist of a passive magnetic shield and active coils to provide the strict design criteria during a plasma scenario. To provide precise computations, detailed numerical models of MFRS should have the dimensions up to several tens of millions of degrees of freedom. Such problem could be solved only with the use of high-efficiency vector algorithms and parallel computations. The paper is dedicated to simulation of MFRS for beam injectors in tokamaks.
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THPSC007 |
Modeling Magnetic Effects of Steel Rebar of Concrete Surroundings for Electrophysical Apparatus |
553 |
|
- V.M. Amoskov, A.M. Bazarov, V.A. Belyakov, M. Kaparkova, V.P. Kukhtin, E.A. Lamzin, B.V. Lyublin, S.E. Sytchevsky
NIIEFA, St. Petersburg, Russia
- V.A. Belyakov, S.E. Sytchevsky
Saint Petersburg State University, Saint Petersburg, Russia
- Y. Gribov
ITER Organization, St. Paul lez Durance, France
|
|
|
Large electrophysical apparatus (accelerators, detectors, tokamaks, stellarators) usually produce strong magnetic fields, which magnetizing surrounding ferromagnetics (steel masses). For example, concrete structures of buildings are reinforced with steel rebar that can produce a local substantial contribution into the magnetic field in the area where the service staff and magnetically sensitive equipment is located. The article describes an advanced approach to modelling magnetic properties of reinforced concrete structures taking into account the anisotropic effect due to rod layers orientations. The equivalent model has been validated in the computation of a test problem. For comparison, simulations have been carried out with a detailed 3D FE model that describes each of the steel rods. The equivalent model has required a few times less finite elements than the detailed model. A comparison of the fields obtained has demonstrated a very good match, even for the distances comparable with the rebar rod gaps.
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|
THPSC012 |
First Experience of the HTS-II Dipole Type Magnets Development at NIIEFA |
563 |
|
- I.Yu. Rodin, V.M. Amoskov, E.N. Andreev, A.A. Dyomina, V.A. Glukhih, V.P. Kukhtin, E.A. Lamzin, E.R. Zapretilina
NIIEFA, St. Petersburg, Russia
- V.A. Belyakov, S.E. Sytchevsky
Saint Petersburg State University, Saint Petersburg, Russia
- S.V. Samoilenkov
JSC SuperOx, Moscow, Russia
|
|
|
The possibility to design, manufacture and test the dipole type magnets from the second generation high-temperature superconductors (HTS-II like YBCO and ReBCO) was demonstrated at the Efremov Institute. The paper describes available computation techniques, design approaches and manufacturing equipment, which could be used to meet the modern requirements for the magnets of accelerators, research equipment, magnet levitation systems etc. The manufacturing equipment comprises the winding lines and insulating devices to provide different configurations and insulating schemes of coils. Additionally, an equipment to produce the Roebel-cable for high current applications was procured and put in operation. As an example, the results of development of the HTC-II dipole type magnets for the different kind dummies of maglev systems are presented. The ReBCO tapes produced by JSC "SuperOx" (Moscow) were used. Up to 0.5 T magnets cooled by liquid nitrogen were designed as a part of levitation system consists of permanent, HTS-II and normal conductive magnets. Comprehensive tests verified the computation results and demonstrated the readiness to develop HTS-II dipole magnets under the customer requirements.
|
|
Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
|