RuPAC2016 - List of Authors (Batrakov, A.M.)

Paper	Title	Page
THCBSH02	Structure and Hardware of LIA-20 Control System	207
	G.A. Fatkin, A.O. Baluev, A.M. Batrakov, E.A. Bekhtenev, A.G. Chupyra, E.S. Kotov, Ya.M. Macheret, V.R. Mamkin, A.V. Ottmar, A. Panov, A.V. Pavlenko, A.N. Selivanov, P.A. Selivanov, A.I. Senchenko, S.S. Serednyakov, K.S. Shtro, S.R. Singatulin, M.Yu. Vasilyev BINP SB RAS, Novosibirsk, Russia E.A. Bekhtenev, G.A. Fatkin, A.V. Pavlenko, A.I. Senchenko, S.S. Serednyakov NSU, Novosibirsk, Russia
	The control system of a linear induction accelerator LIA-20 for radiography is presented in this paper. The accelerator is designed to provide a series of three consecutive electron pulses with energy up to 20 MeV, current 2 kA and lateral size less than 1 mm. To allow reliable operation of the whole complex, coordinated functioning of more than 700 devices must be guaranteed in time frames from milliseconds to several nanoseconds. Total number of control channels exceeds 6000. The control system structure is described and the hardware in VME and CAN standards is presented.
	Slides THCBSH02 [11.911 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPSA001	Commissioning of e⁺/e⁻ Transfer Line from BINP Injection Complex to VEPP-2000 Facility	213
	I.M. Zemlyansky, Yu. Aktershev, V.V. Anashin, A.V. Andrianov, A.M. Batrakov, O.V. Belikov, D.E. Berkaev, M.F. Blinov, B.A. Dovzhenko, F.A. Emanov, V.V. Gambaryan, V.A. Kiselev, I. Koop, A.A. Krasnov, I.A. Mikheev, D.A. Nikiforov, A.V. Otboev, A.V. Pavlenko, V.P. Prosvetov, V.V. Rashchenko, Yu. A. Rogovsky, A.V. Semenov, P.Yu. Shatunov, Y.M. Shatunov, D.B. Shwartz, A.A. Starostenko, S.S. Vasichev, V.D. Yudin, Yu.M. Zharinov BINP SB RAS, Novosibirsk, Russia A.A. Krasnov, A.V. Pavlenko, Yu. A. Rogovsky, D.B. Shwartz, A.A. Starostenko NSU, Novosibirsk, Russia
	Funding: The work is supported by the Ministry of Education and Science of the Russian Federation and by grant NSh-10088.2016.2. Commissioning of e⁺/e⁻ transfer line from Injection Complex to VEPP-2000 facility is done in 2016. Both electrons and positrons beams are injected to VEPP-2000 collider. The channel layout, lattice functions, magnetic elements, beam diagnostic system, vacuum system and control system are presented in this article. The details of commissioning process are also mentioned.
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPSC023	Automated System for Precision Current Sources Testing	589
	E.V. Bykov, A.M. Batrakov, O.V. Belikov, Ye.A. Gusev, V.R. Kozak BINP SB RAS, Novosibirsk, Russia
	The system of beam correction for European XFEL includes about 400 precise current sources. Before including in XFEL equipment the every current source must tested and verified in concordance with specifications. For this purpose there was developed the automated system allowing to test up to 7 current sources simultaneously. The system consists of stand and software that written for linux OS. The stand was equipped by test loads, which emulated the real load, by precise DCCT and by precise analog-to-digital converters with CANbus interface. During testing the current in each current source was changed and digitized in concordance with different algorithms. The duration of typical session was 25 hours. The specific software was developed for this stand. It provides testing process, collecting and storing the primary information and displaying the first information. There are addition utilities which allows to make different analyzes in off-line mode using data accumulated during tests. The article provides a detailed description of the stand and main results.
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPSC030	High-Precision Ramped High-Voltage Source With Up to 50 kV Output Voltage	609
	D.V. Senkov, A.M. Batrakov, I.A. Gusev, A.Yu. Protopopov, A.A. Zharikov BINP SB RAS, Novosibirsk, Russia
	This report describes the precision high-voltage ramped high-voltage power system. The output voltage up to 50 kV with 10 ppm precision. The power system consists of the 3 kW high-voltage source based on multiplier, presision high-voltage divider with digital interface and high-voltage discharge switch to provide low ramp-down time for output voltage. The power system is planed to use in the NIKA booster electron cooler project. The description and test results are presented.
	Poster THPSC030 [1.985 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPSC081	VME Based Digitizers for Waveform Monitoring System of Linear Induction Accelerator LIA-20	721
	E.S. Kotov, A.M. Batrakov, G.A. Fatkin, A.V. Pavlenko, K.S. Shtro, M.Yu. Vasilyev BINP SB RAS, Novosibirsk, Russia G.A. Fatkin, E.S. Kotov, A.V. Pavlenko, M.Yu. Vasilyev NSU, Novosibirsk, Russia
	The Linear Induction Accelerator LIA-20 is being created at the Budker Institute of Nuclear Physics. Waveform monitoring system (WMS) is an important part of LIA-20 control system. WMS includes "slow" and "fast" monitoring subsystems. Three kinds of digitizers have been developed for WMS. "Slow" subsystem is based on ADCx32. This digitizer uses four 8 channel multiplexed SAR ADCs (8 us conversion cycle) with 12-bit resolution. Main feature of this module is program configurable channel sequencing, which allows to measure signals with different timing characteristics. Two types of digitizers are involved in "fast" subsystem. The first one, ADC4x250-4CH, is 4-channel 250 MSPS digitizer. The second one, ADC4x250-1CH, is single channel digitizer with sample rate of 1 GSPS. Resolution of both devices is 12 bit. "Fast" modules are based on the common hardware. This paper describes hardware and software architecture of these modules.
	Poster THPSC081 [1.072 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Structure and Hardware of LIA-20 Control System

207

G.A. Fatkin, A.O. Baluev, A.M. Batrakov, E.A. Bekhtenev, A.G. Chupyra, E.S. Kotov, Ya.M. Macheret, V.R. Mamkin, A.V. Ottmar, A. Panov, A.V. Pavlenko, A.N. Selivanov, P.A. Selivanov, A.I. Senchenko, S.S. Serednyakov, K.S. Shtro, S.R. Singatulin, M.Yu. Vasilyev
BINP SB RAS, Novosibirsk, Russia
E.A. Bekhtenev, G.A. Fatkin, A.V. Pavlenko, A.I. Senchenko, S.S. Serednyakov
NSU, Novosibirsk, Russia

The control system of a linear induction accelerator LIA-20 for radiography is presented in this paper. The accelerator is designed to provide a series of three consecutive electron pulses with energy up to 20 MeV, current 2 kA and lateral size less than 1 mm. To allow reliable operation of the whole complex, coordinated functioning of more than 700 devices must be guaranteed in time frames from milliseconds to several nanoseconds. Total number of control channels exceeds 6000. The control system structure is described and the hardware in VME and CAN standards is presented.

Slides THCBSH02 [11.911 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPSA001

Commissioning of e⁺/e⁻ Transfer Line from BINP Injection Complex to VEPP-2000 Facility

213

I.M. Zemlyansky, Yu. Aktershev, V.V. Anashin, A.V. Andrianov, A.M. Batrakov, O.V. Belikov, D.E. Berkaev, M.F. Blinov, B.A. Dovzhenko, F.A. Emanov, V.V. Gambaryan, V.A. Kiselev, I. Koop, A.A. Krasnov, I.A. Mikheev, D.A. Nikiforov, A.V. Otboev, A.V. Pavlenko, V.P. Prosvetov, V.V. Rashchenko, Yu. A. Rogovsky, A.V. Semenov, P.Yu. Shatunov, Y.M. Shatunov, D.B. Shwartz, A.A. Starostenko, S.S. Vasichev, V.D. Yudin, Yu.M. Zharinov
BINP SB RAS, Novosibirsk, Russia
A.A. Krasnov, A.V. Pavlenko, Yu. A. Rogovsky, D.B. Shwartz, A.A. Starostenko
NSU, Novosibirsk, Russia

Funding: The work is supported by the Ministry of Education and Science of the Russian Federation and by grant NSh-10088.2016.2.
Commissioning of e⁺/e⁻ transfer line from Injection Complex to VEPP-2000 facility is done in 2016. Both electrons and positrons beams are injected to VEPP-2000 collider. The channel layout, lattice functions, magnetic elements, beam diagnostic system, vacuum system and control system are presented in this article. The details of commissioning process are also mentioned.

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPSC023

Automated System for Precision Current Sources Testing

589

E.V. Bykov, A.M. Batrakov, O.V. Belikov, Ye.A. Gusev, V.R. Kozak
BINP SB RAS, Novosibirsk, Russia

The system of beam correction for European XFEL includes about 400 precise current sources. Before including in XFEL equipment the every current source must tested and verified in concordance with specifications. For this purpose there was developed the automated system allowing to test up to 7 current sources simultaneously. The system consists of stand and software that written for linux OS. The stand was equipped by test loads, which emulated the real load, by precise DCCT and by precise analog-to-digital converters with CANbus interface. During testing the current in each current source was changed and digitized in concordance with different algorithms. The duration of typical session was 25 hours. The specific software was developed for this stand. It provides testing process, collecting and storing the primary information and displaying the first information. There are addition utilities which allows to make different analyzes in off-line mode using data accumulated during tests. The article provides a detailed description of the stand and main results.

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPSC030

High-Precision Ramped High-Voltage Source With Up to 50 kV Output Voltage

609

D.V. Senkov, A.M. Batrakov, I.A. Gusev, A.Yu. Protopopov, A.A. Zharikov
BINP SB RAS, Novosibirsk, Russia

This report describes the precision high-voltage ramped high-voltage power system. The output voltage up to 50 kV with 10 ppm precision. The power system consists of the 3 kW high-voltage source based on multiplier, presision high-voltage divider with digital interface and high-voltage discharge switch to provide low ramp-down time for output voltage. The power system is planed to use in the NIKA booster electron cooler project. The description and test results are presented.

Poster THPSC030 [1.985 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPSC081

VME Based Digitizers for Waveform Monitoring System of Linear Induction Accelerator LIA-20

721

E.S. Kotov, A.M. Batrakov, G.A. Fatkin, A.V. Pavlenko, K.S. Shtro, M.Yu. Vasilyev
BINP SB RAS, Novosibirsk, Russia
G.A. Fatkin, E.S. Kotov, A.V. Pavlenko, M.Yu. Vasilyev
NSU, Novosibirsk, Russia

The Linear Induction Accelerator LIA-20 is being created at the Budker Institute of Nuclear Physics. Waveform monitoring system (WMS) is an important part of LIA-20 control system. WMS includes "slow" and "fast" monitoring subsystems. Three kinds of digitizers have been developed for WMS. "Slow" subsystem is based on ADCx32. This digitizer uses four 8 channel multiplexed SAR ADCs (8 us conversion cycle) with 12-bit resolution. Main feature of this module is program configurable channel sequencing, which allows to measure signals with different timing characteristics. Two types of digitizers are involved in "fast" subsystem. The first one, ADC4x250-4CH, is 4-channel 250 MSPS digitizer. The second one, ADC4x250-1CH, is single channel digitizer with sample rate of 1 GSPS. Resolution of both devices is 12 bit. "Fast" modules are based on the common hardware. This paper describes hardware and software architecture of these modules.

Poster THPSC081 [1.072 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)