RuPAC2014 - List of Authors (Vobly, P.)

Paper	Title	Page
WEPSB18	Modification of the Argon Stripping Target of the Tandem Accelerator	194
	Y.M. Ostreinov, A.N. Makarov, S.Yu. Taskaev, P. Vobly BINP SB RAS, Novosibirsk, Russia
	The paper presents and discusses the project of modified gas stripping target. The idea of the target modification is the following. Inside the high-voltage electrode just behind inlet aperture it is proposed to apply 1 T transverse magnetic field using a two-pole permanent magnets. Similar magnets at the exit of the stripping target return proton beam back to the axis of accelerator channel. In this geometry not only significant suppression of ion penetration of the stripping gas into the accelerating channel can be achieved, but also a significant improvement of vacuum conditions in the accelerating channel and reduction of the ultraviolet radiation from the plasma in the stripping target. It is enough to shift the stripping target to a distance greater than the aperture (20 mm) in the high-voltage electrode and to implement a differential gas pumping. The paper presents results of trajectory calculation of the injected ion beam in Comsol Multiphysics. The geometry of the magnetic system and the system of differential gas pumping using turbomolecular pump installed inside the high-voltage electrode are presented.

Paper

Title

Page

Modification of the Argon Stripping Target of the Tandem Accelerator

194

Y.M. Ostreinov, A.N. Makarov, S.Yu. Taskaev, P. Vobly
BINP SB RAS, Novosibirsk, Russia

The paper presents and discusses the project of modified gas stripping target. The idea of the target modification is the following. Inside the high-voltage electrode just behind inlet aperture it is proposed to apply 1 T transverse magnetic field using a two-pole permanent magnets. Similar magnets at the exit of the stripping target return proton beam back to the axis of accelerator channel. In this geometry not only significant suppression of ion penetration of the stripping gas into the accelerating channel can be achieved, but also a significant improvement of vacuum conditions in the accelerating channel and reduction of the ultraviolet radiation from the plasma in the stripping target. It is enough to shift the stripping target to a distance greater than the aperture (20 mm) in the high-voltage electrode and to implement a differential gas pumping. The paper presents results of trajectory calculation of the injected ion beam in Comsol Multiphysics. The geometry of the magnetic system and the system of differential gas pumping using turbomolecular pump installed inside the high-voltage electrode are presented.