RuPAC2014 - List of Authors (Salimov, R.A.)

Paper

Title

Page

Extended Scope of Application of Industrial ELV Accelerator

137

D.A. Kogut, S. Fadeev, N.K. Kuksanov, P.I. Nemytov, R.A. Salimov
BINP SB RAS, Novosibirsk, Russia

ELV accelerators is a D.C. machines. They were designed and manufactured by Budker Institute of Nuclear Physics of Siberian Branch of Russian Academy of Science. These machines are well known in the world. They are operating from Germany in West to Indonesia and Malaysia in East. Main application of these accelerators is the treatment of polymers. Accelerators for the polymer treatment are equipped with the foil window extraction device. Some kinds of ELV accelerators were equipped with the device for focused beam extraction into atmosphere. It allows the treatment of material with a high beam power density under atmosphere pressure. New development of ELV accelerators is concerning the low energy range and design of self-shielded accelerators. There are the set of self-shielded accelerators. The lowest energy is 150 - 200 kV. These machines are unified with usual ELV accelerators and extend their application area.

Slides WECA06 [0.690 MB]

WEPSB15

The Utilization of Standard DC Accelerator ELV for The Tomography

186

E.V. Domarov, K.A. Bryazgin, S. Fadeev, D.A. Kogut, N.K. Kuksanov, P.I. Nemytov, R.A. Salimov
BINP SB RAS, Novosibirsk, Russia

ELV accelerators have been developed at the Institute of Nuclear Physics, Siberian Branch of the Russian Academy of Sciences and occupy a special place in the spectrum of the equipment produced by the Institute. These machines are widely used for radiation modification of polymers and worked well in a variety of processes in many countries of the Eurasian continent. Using serial ELV accelerators for industrial tomography opens up new possibilities for industrial technologies. This increases the requirements on the stability parameters of the injected electron beam. The article formulates the requirements for electron accelerator ELV for tomographic studies, pulsation energy and beam current. Described Schottky effect affects to the shape and size of the ripple current, and the method for increasing the stability of the beam parameters. These machines are unified with conventional accelerators ELV and expand the scope of their utilization.

Paper	Title	Page
WECA06	Extended Scope of Application of Industrial ELV Accelerator	137
	D.A. Kogut, S. Fadeev, N.K. Kuksanov, P.I. Nemytov, R.A. Salimov BINP SB RAS, Novosibirsk, Russia
	ELV accelerators is a D.C. machines. They were designed and manufactured by Budker Institute of Nuclear Physics of Siberian Branch of Russian Academy of Science. These machines are well known in the world. They are operating from Germany in West to Indonesia and Malaysia in East. Main application of these accelerators is the treatment of polymers. Accelerators for the polymer treatment are equipped with the foil window extraction device. Some kinds of ELV accelerators were equipped with the device for focused beam extraction into atmosphere. It allows the treatment of material with a high beam power density under atmosphere pressure. New development of ELV accelerators is concerning the low energy range and design of self-shielded accelerators. There are the set of self-shielded accelerators. The lowest energy is 150 - 200 kV. These machines are unified with usual ELV accelerators and extend their application area.
	Slides WECA06 [0.690 MB]

WEPSB15	The Utilization of Standard DC Accelerator ELV for The Tomography	186
	E.V. Domarov, K.A. Bryazgin, S. Fadeev, D.A. Kogut, N.K. Kuksanov, P.I. Nemytov, R.A. Salimov BINP SB RAS, Novosibirsk, Russia
	ELV accelerators have been developed at the Institute of Nuclear Physics, Siberian Branch of the Russian Academy of Sciences and occupy a special place in the spectrum of the equipment produced by the Institute. These machines are widely used for radiation modification of polymers and worked well in a variety of processes in many countries of the Eurasian continent. Using serial ELV accelerators for industrial tomography opens up new possibilities for industrial technologies. This increases the requirements on the stability parameters of the injected electron beam. The article formulates the requirements for electron accelerator ELV for tomographic studies, pulsation energy and beam current. Described Schottky effect affects to the shape and size of the ripple current, and the method for increasing the stability of the beam parameters. These machines are unified with conventional accelerators ELV and expand the scope of their utilization.