RuPAC2014 - List of Authors (Gavrish, Yu.N.)

Paper

Title

Page

Production of Accelerating Equipment for Nuclear Medicine in NIIEFA. Potentialities and Prospects

125

M.F. Vorogushin, Yu.N. Gavrish, A.P. Strokach
NIIEFA, St. Petersburg, Russia

The D.V.Efremov Institute (NIIEFA) is the leader in Russia in designing and manufacturing of the accelerating equipment for medicine. About one hundred of linear accelerators for the beam therapy and more than forty cyclotrons for production of radiopharmaceuticals have been designed, manufactured and delivered to clinics of Russia and some foreign countries. The equipment designed and manufactured in NIIEFA in its technical characteristics is on a par with foreign analogs and sufficiently cheaper in expenditures for personnel training, hardware and software compatibility, warranty and post-warranty service, delivery of spare parts and updating. In accordance with Federal Targeted Programs on the development of medical and pharmaceutical industries up to 2020, the production facilities, material and technical resources have been prepared for the organization of serial production of cyclotrons and gamma tomographs.

Slides WEX03 [0.901 MB]

WECA11

CC-18/9M Cyclotron System

149

A.P. Strokach, M.A. Emeljanov, A.V. Galchuck, Yu.N. Gavrish, S.V. Grigorenko, V.I. Grigoriev, M.L. Klopenkov, A.N. Kuzhlev, V.G. Mudroliubov, G.V. Muraviov, V.I. Nikishkin, V.I. Ponomarenko, Yu.I. Stogov, S.S. Tsygankov, O.L. Veresov
NIIEFA, St. Petersburg, Russia

The СС-18/9M cyclotron system has been designed, manufactured and delivered to NIITFA, Moscov. The system consists of an updated cyclotron and a targets system. The cyclotron is intended to produce proton and deuteron beams with an energy of 12-18/6-9 MeV and current up to 150/70 mkA. For this purpose, a shielding-type electromagnet and a resonance system have been afresh designed. The target system for the production of F-18 and C-11 radionuclides has been designed in NIIEFA for the first time.

Slides WECA11 [0.547 MB]

WEPSB41

The X-ray System with Sub-system of Shaping of Fun-Shaped Beam and its Application in the Custom Inspection Systems

254

Yu.N. Gavrish, A.M. Fialkovskiy, P.O. Klinovskiy, K.V. Kotenko, V.P. Malyshev
NIIEFA, St. Petersburg, Russia

The analytical survey of X-ray sources based on linear electron accelerators applied in the customs inspection systems (IDK) was carried out on the grounds of requirements to customs inspection systems. The test results of the linear electron accelerator IDK-6/9 MeV which allows to generate the X-ray mode with energies of 6 and 9 MeV are given in this article. The questions of unification of linear electron accelerators for different IDK are also studied. It is proved that the JSC "D.V. Efremov Scientific Research Institute of Electrophysical Apparatus" has the necessary scientific and technical potential and is ready to work out and to produce the X-ray sources for Automobile, Sea and Railway Inspection Systems (IDK). In addition to that the JSC "D.V. Efremov Scientific Research Institute of Electrophysical Apparatus" is ready to organize the serial production of X-ray sources for inspection systems.

Paper	Title	Page
WEX03	Production of Accelerating Equipment for Nuclear Medicine in NIIEFA. Potentialities and Prospects	125
	M.F. Vorogushin, Yu.N. Gavrish, A.P. Strokach NIIEFA, St. Petersburg, Russia
	The D.V.Efremov Institute (NIIEFA) is the leader in Russia in designing and manufacturing of the accelerating equipment for medicine. About one hundred of linear accelerators for the beam therapy and more than forty cyclotrons for production of radiopharmaceuticals have been designed, manufactured and delivered to clinics of Russia and some foreign countries. The equipment designed and manufactured in NIIEFA in its technical characteristics is on a par with foreign analogs and sufficiently cheaper in expenditures for personnel training, hardware and software compatibility, warranty and post-warranty service, delivery of spare parts and updating. In accordance with Federal Targeted Programs on the development of medical and pharmaceutical industries up to 2020, the production facilities, material and technical resources have been prepared for the organization of serial production of cyclotrons and gamma tomographs.
	Slides WEX03 [0.901 MB]

WECA11	CC-18/9M Cyclotron System	149
	A.P. Strokach, M.A. Emeljanov, A.V. Galchuck, Yu.N. Gavrish, S.V. Grigorenko, V.I. Grigoriev, M.L. Klopenkov, A.N. Kuzhlev, V.G. Mudroliubov, G.V. Muraviov, V.I. Nikishkin, V.I. Ponomarenko, Yu.I. Stogov, S.S. Tsygankov, O.L. Veresov NIIEFA, St. Petersburg, Russia
	The СС-18/9M cyclotron system has been designed, manufactured and delivered to NIITFA, Moscov. The system consists of an updated cyclotron and a targets system. The cyclotron is intended to produce proton and deuteron beams with an energy of 12-18/6-9 MeV and current up to 150/70 mkA. For this purpose, a shielding-type electromagnet and a resonance system have been afresh designed. The target system for the production of F-18 and C-11 radionuclides has been designed in NIIEFA for the first time.
	Slides WECA11 [0.547 MB]

WEPSB41	The X-ray System with Sub-system of Shaping of Fun-Shaped Beam and its Application in the Custom Inspection Systems	254
	Yu.N. Gavrish, A.M. Fialkovskiy, P.O. Klinovskiy, K.V. Kotenko, V.P. Malyshev NIIEFA, St. Petersburg, Russia
	The analytical survey of X-ray sources based on linear electron accelerators applied in the customs inspection systems (IDK) was carried out on the grounds of requirements to customs inspection systems. The test results of the linear electron accelerator IDK-6/9 MeV which allows to generate the X-ray mode with energies of 6 and 9 MeV are given in this article. The questions of unification of linear electron accelerators for different IDK are also studied. It is proved that the JSC "D.V. Efremov Scientific Research Institute of Electrophysical Apparatus" has the necessary scientific and technical potential and is ready to work out and to produce the X-ray sources for Automobile, Sea and Railway Inspection Systems (IDK). In addition to that the JSC "D.V. Efremov Scientific Research Institute of Electrophysical Apparatus" is ready to organize the serial production of X-ray sources for inspection systems.