PAC07 - List of Authors (Pinayev, I.)

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Pinayev, I.

Paper	Title	Page
MOPAS101	Characterization of the RF System of NSLS X-ray Ring	661
	I. Pinayev BNL, Upton, Long Island, New York
	The proper phasing is required for a storage ring with multiple RF cavities. In this paper we present method for simultaneous measurement of the accelerating voltage and relative phase for individual cavity at operational conditions. Theory and experimental results for NSLS X-ray synchrotron are presented.
MOPAS102	Design of Beam Transfer Lines for the NSLS II	664
	N. Tsoupas, R. Heese, R. Meir, I. Pinayev, J. Rose, T. V. Shaftan, C. Stelmach BNL, Upton, New York
	Funding: Work supported by the US Department of Energy The proposed NSLS II light source* to be built at Brookhaven National Laboratory utilizes a LINAC and a Booster with a Storage-ring which share the same tunnel, but at different horizontal planes. The Booster which accepts beam from the LINAC, accelerates the electron beam to an energy of 3.0 GeV and the beam is extracted to the Booster_to_Storage_Ring(BtS) transport line. The BtS line transports the beam and injects it into the Storage ring . In order to facilitate the design of the BtS transfer line, the line has been partitioned in three sections which can be considered as independent. The function of each the three sections will be discussed in details and the procedure for the design of the BtS line and other details about the optics and the magnetic elements of the line will be presented in the paper. The LINAC to Booster beam transfer line will also be discussed. *NSLS II CDR BNL
TUPMS077	Injection Simulations for NSLS-II Storage Ring	1350
	I. Pinayev, J. Rose, T. V. Shaftan, L.-H. Yu BNL, Upton, Long Island, New York
	Operation of the NSLS-II storage ring in the top-up mode requires highly reliable injection with low losses. In this paper we provide results of the injection simulations for the storage ring. The alignment tolerances as well as requirements for the injected beam parameters are also discussed.
TUPMS081	Design considerations of the NSLS-II Injection Linac	1359
	J. Rose, I. Pinayev, T. V. Shaftan BNL, Upton, Long Island, New York
	The NSLS-II injector consists of a 3 GeV booster injected by a 200MeV linac. Specifications of the linac are derived from Booster and Storage ring beam requirements. Linac design considerations are presented to meet these specifications.
TUPMS083	Conceptual Design of the NSLS-II Injection System	1362
	T. V. Shaftan, J. Beebe-Wang, J. Bengtsson, G. Ganetis, W. Guo, R. Heese, H.-C. Hseuh, E. D. Johnson, V. Litvinenko, A. U. Luccio, W. Meng, S. Ozaki, I. Pinayev, S. Pjerov, D. Raparia, J. Rose, S. Sharma, J. Skaritka, C. Stelmach, N. Tsoupas, D. Wang, L.-H. Yu BNL, Upton, Long Island, New York
	Funding: This work was supported by Department of Energy contract DE-AC02-98CH10886. We present conceptual design of the NSLS-II injection system. The injection system consists of low-energy linac, booster and transport lines. We review the requirements on the injection system imposed by the storage ring design and means of meeting these requirements. We discuss main parameters and layout of the injection system components.