A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Medjidzade, V.

Paper Title Page
MOPAS043 Instrumentation for the Cornell ERL Injector Test Cryostats 527
  • P. Quigley
    Cornell University, Department of Physics, Ithaca, New York
  • S. A. Belomestnykh, M. Liepe, V. Medjidzade, J. Sears, V. Veshcherevich
    CLASSE, Ithaca
  Funding: Work is supported by the National Science Foundation grant PHY 0131508

Cornell is building a 1.3 GHz Injector Cryomodule for an ERL prototype. The cryomodule consists of five two-cell niobium cavities each cavity having two coaxial power input couplers. Cavity and coupler pairs will require acceptance testing at high power prior to assembly in the injector cryomodule. A liquid nitrogen cryostat for testing the couplers at high power has been built and the first input coupler test is complete. In addition, a Horizontal Test Cryostat (HTC) is being built to test input coupler pairs and cavities as a set. The first HTC test is scheduled for spring 2007. Details for instrumentation of the Coupler Test Cryostat (CTC) and HTC are presented.

WEPMS007 Manufacture and Performance of Superconducting RF Cavities for Cornell ERL Injector 2340
  • R. L. Geng, P. Barnes, B. Clasby, J. Kaminski, M. Liepe, V. Medjidzade, D. Meidlinger, H. Padamsee, J. Sears, V. D. Shemelin, N. Sherwood, M. Tigner
    CLASSE, Ithaca
  Funding: Work supported by NSF

Six 1300 MHz superconducting niobium 2-cell cavities are manufactured for the prototype of Cornell ERL injector to boost the energy of a high current, low emittance beam produced by a DC gun. Designed for high current beam acceleration, these cavities have new characteristics as compared to previously developed low-current cavities such as those for TTF. Precision manufacture is emphasized for a better straightness of the cavity axis so as to avoid unwanted emittance dilution. We present the manufacturing, processing and vertical test performance of these cavities. We also present the impact of new cavity characteristics to the cavity performance as learnt from vertical tests. Solutions for improving cavity performance are discussed.

THOAKI02 The Cornell ERL Superconducting 2-Cell Injector Cavity String and Test Cryomodule 2572
  • M. Liepe, S. A. Belomestnykh, E. P. Chojnacki, V. Medjidzade, H. Padamsee, P. Quigley, J. Sears, V. D. Shemelin, V. Veshcherevich
    CLASSE, Ithaca
  Funding: Work supported by NSF.

Cornell University is developing and fabricating a SRF injector cryomodule for the acceleration of the high current (100 mA) beam in the Cornell ERL prototype and ERL light source. Major challenges include emittance preservation of the low energy, ultra low emittance beam, cw cavity operation, and strong HOM damping with efficient HOM power extraction. Prototypes have been completed for the 2-cell niobium cavity with helium vessel, coaxial blade tuner with piezo fine tuners, twin high power input couplers, and beam line HOM absorbers loaded with ferrites and ceramics. Axial symmetry of HOM absorbers, together with two symmetrically placed input couplers per cavity, avoids transverse on-axis fields, which would cause emittance growth. A one-cavity cryostat has been designed following concepts of the TTF cryostat, and is presently under fabrication and assembly. The cryostat design has been optimized for precise cavity alignment, good magnetic shielding, and high dynamic cryogenic loads from the RF cavities, input couplers, and HOM loads. In this paper we report on the status of the assembly and first test of the one-cavity test cryostat.

slides icon Slides