• W. Meng, G. Ganetis, A. K. Jain, D. Kayran, V. Litvinenko, C. Longo, G. J. Mahler, E. Pozdeyev, J. E. Tuozzolo
  BNL, Upton, Long Island, New York

In this paper we describe unique features of magnets for R&D ERL, which is under construction in Collider-Accelerator Department, BNL. The R&D ERL serves as a test-bed future BNL ERLs, such as electron-cooler-ERL for RHIC and 20 GeV ERL for future electron-hadron, eRHIC. We present selected designs of various dipole and quadrupole magnets, which are used in Z-bend merging systems and the returning loop, 3-D simulations of the fields in these magnets, particle tracking and analysis of magnet's influence on the beam parameters. We discuss an uncommon method of setting requirements on the quality of magnetic field and transferring them into measurable parameters as well as into manufacturing tolerances. We compare selected simulation with results magnetic measurements.

• V. Litvinenko, J. Alduino, D. Beavis, I. Ben-Zvi, M. Blaskiewicz, J. M. Brennan, A. Burrill, R. Calaga, P. Cameron, X. Chang, K. A. Drees, G. Ganetis, D. M. Gassner, J. G. Grimes, H. Hahn, L. R. Hammons, A. Hershcovitch, H.-C. Hseuh, A. K. Jain, D. Kayran, J. Kewisch, R. F. Lambiase, D. L. Lederle, C. Longo, G. J. Mahler, G. T. McIntyre, W. Meng, T. C. Nehring, B. Oerter, C. Pai, D. Pate, D. Phillips, E. Pozdeyev, T. Rao, J. Reich, T. Roser, T. Russo, Z. Segalov, J. Smedley, K. Smith, J. E. Tuozzolo, G. Wang, D. Weiss, N. Williams, Q. Wu, K. Yip, A. Zaltsman
  BNL, Upton, Long Island, New York
• H. Bluem, M. D. Cole, A. J. Favale, D. Holmes, J. Rathke, T. Schultheiss, A. M.M. Todd
  AES, Princeton, New Jersey
• B. W. Buckley
  CLASSE, Ithaca
• G. Citver
  Stony Brook University, StonyBrook
• J. R. Delayen, L. W. Funk, H. L. Phillips, J. P. Preble
  Jefferson Lab, Newport News, Virginia

In this paper we present status and plans for the 20-MeV R&D energy recovery linac, which is under construction at Collider Accelerator Department at BNL. The facility is based on high current (up to 0.5 A of average current) super-conducting 2.5 MeV RF gun, single-mode super-conducting 5-cell RF linac and about 20-m long return loop with very flexible lattice. The R&D ERL, which is planned for commissioning in 2008, aims to address many outstanding questions relevant for high current, high brightness energy-recovery linacs.

• I. Ben-Zvi, J. Alduino, D. S. Barton, D. Beavis, M. Blaskiewicz, J. M. Brennan, A. Burrill, R. Calaga, P. Cameron, X. Chang, K. A. Drees, A. V. Fedotov, W. Fischer, G. Ganetis, D. M. Gassner, J. G. Grimes, H. Hahn, L. R. Hammons, A. Hershcovitch, H.-C. Hseuh, D. Kayran, J. Kewisch, R. F. Lambiase, D. L. Lederle, V. Litvinenko, C. Longo, W. W. MacKay, G. J. Mahler, G. T. McIntyre, W. Meng, B. Oerter, C. Pai, G. Parzen, D. Pate, D. Phillips, S. R. Plate, E. Pozdeyev, T. Rao, J. Reich, T. Roser, A. G. Ruggiero, T. Russo, C. Schultheiss, Z. Segalov, J. Smedley, K. Smith, T. Tallerico, S. Tepikian, R. Than, R. J. Todd, D. Trbojevic, J. E. Tuozzolo, P. Wanderer, G. Wang, D. Weiss, Q. Wu, K. Yip, A. Zaltsman
  BNL, Upton, Long Island, New York
• D. T. Abell, G. I. Bell, D. L. Bruhwiler, R. Busby, J. R. Cary, D. A. Dimitrov, P. Messmer, V. H. Ranjbar, D. S. Smithe, A. V. Sobol, P. Stoltz
  Tech-X, Boulder, Colorado
• A. V. Aleksandrov, D. L. Douglas, Y. W. Kang
  ORNL, Oak Ridge, Tennessee
• H. Bluem, M. D. Cole, A. J. Favale, D. Holmes, J. Rathke, T. Schultheiss, J. J. Sredniawski, A. M.M. Todd
  AES, Princeton, New Jersey
• A. V. Burov, S. Nagaitsev, L. R. Prost
  Fermilab, Batavia, Illinois
• Y. S. Derbenev, P. Kneisel, J. Mammosser, H. L. Phillips, J. P. Preble, C. E. Reece, R. A. Rimmer, J. Saunders, M. Stirbet, H. Wang
  Jefferson Lab, Newport News, Virginia
• V. V. Parkhomchuk, V. B. Reva
  BINP SB RAS, Novosibirsk
• A. O. Sidorin, A. V. Smirnov
  JINR, Dubna, Moscow Region

The physics interest in a luminosity upgrade of RHIC requires the development of a cooling-frontier facility. Detailed cooling calculations have been made to determine the efficacy of electron cooling of the stored RHIC beams. This has been followed by beam dynamics simulations to establish the feasibility of creating the necessary electron beam. Electron cooling of RHIC at collisions requires electron beam energy up to about 54 MeV at an average current of between 50 to 100 mA and a particularly bright electron beam. The accelerator chosen to generate this electron beam is a superconducting Energy Recovery Linac (ERL) with a superconducting RF gun with a laser-photocathode. An intensive experimental R&D program engages the various elements of the accelerator: Photocathodes of novel design, superconducting RF electron gun of a particularly high current and low emittance, a very high-current ERL cavity and a demonstration ERL using these components.

• E. Pozdeyev, I. Ben-Zvi, P. Cameron, K. A. Drees, D. M. Gassner, D. Kayran, V. Litvinenko, G. J. Mahler, T. Rao
  BNL, Upton, Long Island, New York

The ERL Prototype project is currently under development at the Brookhaven National Laboratory. The ERL is expected to demonstrate energy recovery of high-intensity beams with a current of up to a few hundred milliamps, while preserving the emittance of bunches with a charge of a few nanocoulombs produced by a high-current SRF gun. To successfully accomplish this task the machine will include beam diagnostics that will be used for accurate characterization of the three dimensional beam phase space at the injection and recirculation energies, transverse and longitudinal beam matching, orbit alignment, beam current measurement, and machine protection. This paper outlines requirements on the ERL diagnostics and describes its setup and modes of operation.