| Paper |
Title |
Page |
| MOPAN094 |
Operation Experiences of the Bunch-by-Bunch Feedback System for TLS
|
383 |
| |
- K. T. Hsu, J. Chen, P. C. Chiu, S. Y. Hsu, K. H. Hu, C. H. Kuo, D. Lee
NSRRC, Hsinchu
|
|
| |
Severe multi-bunch instabilities are bothered the operation of Taiwan Light Source (TLS) during the operation during 2004 just after SRF system upgrade. FPGA-based bunch-by-bunch feedback system was commissioning during late 2005 and early 2006. Multi-bunch instability in both transverse plans and longitudinal are well control. Delivery up to 400 mA stored beam was demonstrated. Transverse feedback system make low chromaticity operation is possible; this is very helpful to improve injection efficiency which are essential for routine top-up operation. Operation experiences of the bunch-by-bunch feedback system will be summary in this report.
|
|
| FRPMN082 |
Diagnostic and Timing Supports for Top-Up Injection Operation for the TLS
|
4252 |
| |
- J. Chen, P. C. Chiu, K. T. Hsu, S. Y. Hsu, K. H. Hu, C. H. Kuo, D. Lee, C.-J. Wang, C. Y. Wu
NSRRC, Hsinchu
|
|
| |
Routine top-up operation of Taiwan Light Source (TLS) was started from October 2005 after high efficiency multi-bunch instabilities suppression system put into service. To support the top-up operation, various diagnostics and timing supports are needed. These include diagnostics for injection efficiency, filling pattern of the storage ring, tune, instability, loss pattern measurement. Timing control of the injection process are also needed. Design consideration and details of these efforts will be summary in this report. Further possible improvement will be also discussed.
|
|
| FRPMN086 |
Beam Position Monitoring System Upgrade for the TLS
|
4276 |
| |
- C. H. Kuo, J. Chen, P. C. Chiu, K. T. Hsu, K. H. Hu
NSRRC, Hsinchu
|
|
| |
Taiwan light source (TLS) equips with 59 beam position monitors (BPM). Existing Bergos's type multiplexing BPM electronics are working well during last decade. To improve the functionality of the BPM system, new type of BPM electronics (Liberal Electron) will be replace some existing multiplexing BPM electronics. Seamless integration of two kinds of electronics is via reflective memory. The high precision closed orbits were measured by multiplexing BPM via multi-channel PMC form factor 16-bits ADC modules and gigabit Ethernet fast access channel of Libera Electron. Turn-by-turn beam position measurement is also supported by new BPM electronics. Tune measurement is also possible by spectra analysis of the turn-by-turn beam position data. The preliminary version of the orbit data was sampled every millisecond. Fast orbit data were shared by reflective memory network to support fast orbit feedback application. Averaged data were updated to control database at a rate of 10 Hz. The system structure, software environment and preliminary beam test of the BPM system are summarized in this report.
|
|