Paper |
Title |
Page |
RPAP025 |
A 7MeV S-Band 2998MHz Variable Pulse Length Linear Accelerator System
|
1895 |
|
- M. Hernandez, H. Deruyter, D. Skowbo, R.R. Smith
Accuray, Inc, Mountain View, California
- A.V. Mishin, A.J. Saverskiy
AS&E, Billerica, Massachusetts
|
|
|
American Science and Engineering High Energy Systems Division (AS&E HESD) has designed and commissioned a variable pulse length 7 MeV electron accelerator system. The system is capable of delivering a 7 MeV electron beam with a pulse length of 10 nS FWHM and a peak current of 1 ampere. The system can also produce electron pulses with lengths of 20, 50, 100, 200, 400 nS and 3 uS FWHM with corresponding lower peak currents. The accelerator system consists of a gridded electron gun, focusing coil, an electrostatic deflector system, Helmholtz coils, a standing wave side coupled S-band linac, a 2.6 MW peak power magnetron, an RF circulator, a fast toroid, vacuum system and a PLC/PC control system. The system has been operated at repetition rates up to 250pps. The design, simulations and experimental results from the accelerator system are presented in this paper.
|
|
RPAP027 |
Portable X-Band Linear Electron Accelerators for Radiographic Applications
|
1985 |
|
- A.J. Saverskiy, H. Deruyter, M. Hernandez, A.V. Mishin, D. Skowbo
AS&E, Billerica, Massachusetts
|
|
|
The MINAC series portable linear electron accelerator systems designed and manufactured at American Science and Engineering, Inc. High Energy Systems Division (AS&E HESD) are discussed in this paper. Each system can be configured as either an X-ray or electron beam source. The powerful 4 MeV and 6 MeV linacs powered by a 1,5 MW magnetron permit operation in a dose rate range from 100 R/min at 80 cm to 600 R/min at 80 cm. Each MINAC is a self-contained source with radiation leakage outside of the X-ray head less than 0,1% of the maximum dose. Along with these systems a 1 MeV ultra compact MINAC has been successfully tested. The unit is available with radiation leakage less then 0.01% and permits producing X-ray beam in an energy range (1…2) MeV at a high output dose rate. Design and experimental parameters are presented. The common and system specific features are also discussed.
|
|