MEDSI2023 - List of Authors (Lin, M.H.)

Paper	Title	Page
TUPYP028	Thermal Analysis Software for Optical Elements of Hefei Advanced Light Facility*	73
	M.H. Lin, J. Chen, S.K. Jiang, Q.P. Wang, Z. Wang USTC/NSRL, Hefei, Anhui, People’s Republic of China
	Thermal deformation is a key influencing factor in the surface shape of optical components for beamline optics. In the process of beamline design, it is necessary not only to select different cooling schemes based on thermal loading conditions but also to extensively optimize the parameters of these cooling schemes. The traditional approach for optimizing cooling scheme design often requires significant manual effort. By integrating existing experience in optimizing cooling scheme designs, this study transforms the parameterized design tasks that were originally performed manually into automated processes using software. This paper presents the latest advancements in the automated design software for cooling schemes of beamline optical components, and the results indicate that the optimization outcomes of the existing automated design software are close to those achieved through manual optimization.
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-TUPYP028
About •	Received ※ 01 November 2023 — Revised ※ 03 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 03 December 2023
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPPP007	Optimizing Indirect Cooling of a High Accuracy Surface Plane Mirror in Plane-Grating Monochromator	280
	J. Chen, X.W. Du, M.H. Lin, Q.P. Wang, Z. Wang USTC/NSRL, Hefei, Anhui, People’s Republic of China
	Funding: This work is supported by the Chinese Academy of Science (CAS) and the Anhui province government for key techniques R&D of Hefei Advanced Light Facility. For the cooling of the plane mirror in VIA-PGMs (var-iable-included-angle plane-grating monochromators), the top-side indirect cooling based on water is preferred for its advantages, such as cheaper, easier to use, smart notches, etc, when compared to the internal cooling. But it also arises challenges to control the RMS residual slope error of the mirror, whose requirement is less than 100 nano-radian. This requirement is even hard to fulfill, when combined with 1) the asymmetry thermal defor-mation on the meridian of the footprint area during the energy scanning, 2) the high heat load deduced by the synchrotron light and 3) the no obvious effects of the classical optimizations, such as increasing footprint size, cooling efficiency or adding smart notches. An effective way was found after numerous attempts, which is to make the footprint area far from the mirror¿s edge to reduce the asymmetry of the thermal deformation except for leading to a longer mirror. This paper will illustrate how the asymmetry affects the mirror¿s residual slope error and then, focus on the relationship among the asymmetry of cooling and the distance to provide a ref-erence for optical cooling.
	Poster THPPP007 [1.805 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THPPP007
About •	Received ※ 26 October 2023 — Revised ※ 06 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 04 March 2024
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPPP008	Optimization of Thermal Deformation of a Horizontally Deflecting High-Heat-Load Mirror Based on eInGa Bath Cooling	283
	J. Chen, X.W. Du, M.H. Lin, Q.P. Wang, Z. Wang USTC/NSRL, Hefei, Anhui, People’s Republic of China
	Funding: This work is supported by the Chinese Academy of Science (CAS) and the Anhui province government for key techniques R&D of Hefei Advanced Light Facility. The synchrotron facility are developing towards higher brightness, lower divergence, narrower pulse, higher stability, etc. Therefore, the requirements of the first mirror of the beamline, who bear high-heat-load, were upgraded, and the performances of the mirror will be affected easily by other factors, such as flow induced vibration, clamping force, etc. Indirect water cooling based on eInGa bath is regarded as an effective mean to solve these thorny problems in designing of the first mirror cooling. However, for the case a horizontal de-flection mirror, the unilateral cooling method is usually adopted, resulting in some changes in the structure of the mirror. In this paper, a first mirror horizontally deflect-ing in Hefei advanced light source (HALF) are taken as examples to introduce the optimization method to achieve ultra-low meridian slope error of the first hori-zontal deflection mirror. The results show that this opti-mization method provides a rapid design mean to design the cooling scheme of the horizontally deflecting mirror based on the eInGa bath.
	Poster THPPP008 [2.901 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THPPP008
About •	Received ※ 01 November 2023 — Revised ※ 06 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 26 February 2024
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Thermal Analysis Software for Optical Elements of Hefei Advanced Light Facility*

73

M.H. Lin, J. Chen, S.K. Jiang, Q.P. Wang, Z. Wang
USTC/NSRL, Hefei, Anhui, People’s Republic of China

Thermal deformation is a key influencing factor in the surface shape of optical components for beamline optics. In the process of beamline design, it is necessary not only to select different cooling schemes based on thermal loading conditions but also to extensively optimize the parameters of these cooling schemes. The traditional approach for optimizing cooling scheme design often requires significant manual effort. By integrating existing experience in optimizing cooling scheme designs, this study transforms the parameterized design tasks that were originally performed manually into automated processes using software. This paper presents the latest advancements in the automated design software for cooling schemes of beamline optical components, and the results indicate that the optimization outcomes of the existing automated design software are close to those achieved through manual optimization.

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-TUPYP028

About •

Received ※ 01 November 2023 — Revised ※ 03 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 03 December 2023

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPPP007

Optimizing Indirect Cooling of a High Accuracy Surface Plane Mirror in Plane-Grating Monochromator

280

J. Chen, X.W. Du, M.H. Lin, Q.P. Wang, Z. Wang
USTC/NSRL, Hefei, Anhui, People’s Republic of China

Funding: This work is supported by the Chinese Academy of Science (CAS) and the Anhui province government for key techniques R&D of Hefei Advanced Light Facility.
For the cooling of the plane mirror in VIA-PGMs (var-iable-included-angle plane-grating monochromators), the top-side indirect cooling based on water is preferred for its advantages, such as cheaper, easier to use, smart notches, etc, when compared to the internal cooling. But it also arises challenges to control the RMS residual slope error of the mirror, whose requirement is less than 100 nano-radian. This requirement is even hard to fulfill, when combined with 1) the asymmetry thermal defor-mation on the meridian of the footprint area during the energy scanning, 2) the high heat load deduced by the synchrotron light and 3) the no obvious effects of the classical optimizations, such as increasing footprint size, cooling efficiency or adding smart notches. An effective way was found after numerous attempts, which is to make the footprint area far from the mirror¿s edge to reduce the asymmetry of the thermal deformation except for leading to a longer mirror. This paper will illustrate how the asymmetry affects the mirror¿s residual slope error and then, focus on the relationship among the asymmetry of cooling and the distance to provide a ref-erence for optical cooling.

Poster THPPP007 [1.805 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THPPP007

About •

Received ※ 26 October 2023 — Revised ※ 06 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 04 March 2024

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPPP008

Optimization of Thermal Deformation of a Horizontally Deflecting High-Heat-Load Mirror Based on eInGa Bath Cooling

283

J. Chen, X.W. Du, M.H. Lin, Q.P. Wang, Z. Wang
USTC/NSRL, Hefei, Anhui, People’s Republic of China

Funding: This work is supported by the Chinese Academy of Science (CAS) and the Anhui province government for key techniques R&D of Hefei Advanced Light Facility.
The synchrotron facility are developing towards higher brightness, lower divergence, narrower pulse, higher stability, etc. Therefore, the requirements of the first mirror of the beamline, who bear high-heat-load, were upgraded, and the performances of the mirror will be affected easily by other factors, such as flow induced vibration, clamping force, etc. Indirect water cooling based on eInGa bath is regarded as an effective mean to solve these thorny problems in designing of the first mirror cooling. However, for the case a horizontal de-flection mirror, the unilateral cooling method is usually adopted, resulting in some changes in the structure of the mirror. In this paper, a first mirror horizontally deflect-ing in Hefei advanced light source (HALF) are taken as examples to introduce the optimization method to achieve ultra-low meridian slope error of the first hori-zontal deflection mirror. The results show that this opti-mization method provides a rapid design mean to design the cooling scheme of the horizontally deflecting mirror based on the eInGa bath.

Poster THPPP008 [2.901 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THPPP008

About •

Received ※ 01 November 2023 — Revised ※ 06 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 26 February 2024

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)