MEDSI2023 - List of Authors (Ducourtieux, S.)

Paper	Title	Page
WEOBM01	Challenges and Solutions for the Mechanical Design of SOLEIL-II	133
	K. Tavakoli, F. Alves, G. Baranton, Y. Benyakhlef, A. Berlioux, A. Carcy, M.-E. Couprie, J. Da Silva Castro, S. Ducourtieux, Z. Fan, C. Herbeaux, C.A. Kitégi, A. Le Jollec, F. Lepage, V. Leroux, A. Loulergue, F. Marteau, A. Mary, A. Nadji, S. Pautard, V. Pinty, M. Ribbens, T.S. Thoraud SOLEIL, Gif-sur-Yvette, France
	The Synchrotron SOLEIL is a large-scale research facility in France that provides synchrotron radiation from terahertz to hard X-rays for various scientific applications. To meet the evolving needs of the scientific community and to remain competitive with other European facilities, SOLEIL has planned an upgrade project called SOLEIL-II. The project aims to reconstruct the storage ring as a Diffraction Limited Storage Ring (DLSR) with a record low emittance which will enable nanometric resolution. The mechanical design of the upgrade project involves several challenges such as the integration of new magnets, vacuum chambers, insertion devices and beamlines in the existing infrastructure, the optimization of the alignment and stability of the components, and the minimization of the downtime during the transition from SOLEIL to SOLEIL-II. The mechanical design is mainly based on extensive simulations, prototyping and testing to ensure the feasibility, reliability, and performance of several key elements. This abstract presents an overview of the mechanical design concepts and solutions adopted for the SOLEIL-II project.
	Slides WEOBM01 [8.729 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-WEOBM01
About •	Received ※ 25 September 2023 — Revised ※ 04 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 03 April 2024
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPPP038	Girders for SOLEIL-II Storage Ring	332
	J. Da Silva Castro, S. Ducourtieux, Z. Fan, F. Lepage, A. Nadji, K. Tavakoli SOLEIL, Gif-sur-Yvette, France
	After two decades since its establishment, the SOLEIL Synchrotron facility needs to adapt to follow new scientific fields that have emerged since. After the Conceptual Design Report (CDR) phase for the facility Upgrade, the SOLEIL teams have been working for several months on the Technical Design Report (TDR). The ¿SOLEIL Upgrade¿ project is called ¿SOLEIL II¿ and is divided into several sub-projects. Among these sub-projects, one concerns storage ring Girders that will support all magnets of the new Lattice. These 86 Girders, each one supported by 2 plinths, must ensure an excellent degree of vibration stability. Before obtaining a final design for these Girders, a significant amount of study work has already been carried out (design, finite elements simulations, sub-assembly prototyping, dynamic measurements, tests, etc.). To validate the concepts, a fully equipped prototype girder was launched into manufacturing. In this contribution the preliminary studies and the ongoing investigations on SOLEIL II girder design will be presented.
DOI •	reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THPPP038
About •	Received ※ 24 October 2023 — Revised ※ 05 November 2023 — Accepted ※ 09 November 2023 — Issued ※ 14 March 2024
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Challenges and Solutions for the Mechanical Design of SOLEIL-II

133

K. Tavakoli, F. Alves, G. Baranton, Y. Benyakhlef, A. Berlioux, A. Carcy, M.-E. Couprie, J. Da Silva Castro, S. Ducourtieux, Z. Fan, C. Herbeaux, C.A. Kitégi, A. Le Jollec, F. Lepage, V. Leroux, A. Loulergue, F. Marteau, A. Mary, A. Nadji, S. Pautard, V. Pinty, M. Ribbens, T.S. Thoraud
SOLEIL, Gif-sur-Yvette, France

The Synchrotron SOLEIL is a large-scale research facility in France that provides synchrotron radiation from terahertz to hard X-rays for various scientific applications. To meet the evolving needs of the scientific community and to remain competitive with other European facilities, SOLEIL has planned an upgrade project called SOLEIL-II. The project aims to reconstruct the storage ring as a Diffraction Limited Storage Ring (DLSR) with a record low emittance which will enable nanometric resolution. The mechanical design of the upgrade project involves several challenges such as the integration of new magnets, vacuum chambers, insertion devices and beamlines in the existing infrastructure, the optimization of the alignment and stability of the components, and the minimization of the downtime during the transition from SOLEIL to SOLEIL-II. The mechanical design is mainly based on extensive simulations, prototyping and testing to ensure the feasibility, reliability, and performance of several key elements. This abstract presents an overview of the mechanical design concepts and solutions adopted for the SOLEIL-II project.

Slides WEOBM01 [8.729 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-WEOBM01

About •

Received ※ 25 September 2023 — Revised ※ 04 November 2023 — Accepted ※ 08 November 2023 — Issued ※ 03 April 2024

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPPP038

Girders for SOLEIL-II Storage Ring

332

J. Da Silva Castro, S. Ducourtieux, Z. Fan, F. Lepage, A. Nadji, K. Tavakoli
SOLEIL, Gif-sur-Yvette, France

After two decades since its establishment, the SOLEIL Synchrotron facility needs to adapt to follow new scientific fields that have emerged since. After the Conceptual Design Report (CDR) phase for the facility Upgrade, the SOLEIL teams have been working for several months on the Technical Design Report (TDR). The ¿SOLEIL Upgrade¿ project is called ¿SOLEIL II¿ and is divided into several sub-projects. Among these sub-projects, one concerns storage ring Girders that will support all magnets of the new Lattice. These 86 Girders, each one supported by 2 plinths, must ensure an excellent degree of vibration stability. Before obtaining a final design for these Girders, a significant amount of study work has already been carried out (design, finite elements simulations, sub-assembly prototyping, dynamic measurements, tests, etc.). To validate the concepts, a fully equipped prototype girder was launched into manufacturing. In this contribution the preliminary studies and the ongoing investigations on SOLEIL II girder design will be presented.

DOI •

reference for this paper ※ doi:10.18429/JACoW-MEDSI2023-THPPP038

About •

Received ※ 24 October 2023 — Revised ※ 05 November 2023 — Accepted ※ 09 November 2023 — Issued ※ 14 March 2024

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)