LINAC2016 - List of Authors (Iturbe, R.)

Paper	Title	Page
THPRC031	Manufacturing of MEBT Combined Quadrupole & Steerer Magnets for the Linear IFMIF Prototype Accelerator LIPAC	840
	J. Castellanos, B. Brañas, J. Mollá, C. Oliver, I. Podadera, F. Toral CIEMAT, Madrid, Spain R. Iturbe, B. López ANTEC Magnets SLU, Vizcaya, Spain O. Nomen IREC, Sant Adria del Besos, Spain
	Funding: This work has been funded by the Spanish Ministry of Economy and Competitiveness under the Agreement as published in BOE, 16/01/2013, page 1988. The Medium Energy Beam Transport line (MEBT) that is being installed on the LIPAC accelerator* will have five quadrupole and steerer magnets which have been recently manufactured and tested. The design of the magnets was done by CIEMAT** and considers a magnetic yoke made of four solid iron quadrants joined together. The yoke integrates four water-cooled coils (quadrupole) and eight air-cooled coils (steerers) made of copper wires. The manufacturing and testing (excluded magnetic measurements) of the five magnets were carried out by the Spanish company ANTECSA. This paper focuses on the technical aspects considered during the manufacturing and the assembly of the different components of the magnets. The details about the geometrical, electrical and hydraulic measurements and tests that were carried out before the magnetic measurements are also described. * A. Mosnier et al., IPAC10, MOPEC056, p.588, Kyoto, Japan (2010) ** C. Oliver et al., IPAC11, WEPO014, p. 2424, San Sebastián, Spain (2011)
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-THPRC031
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Manufacturing of MEBT Combined Quadrupole & Steerer Magnets for the Linear IFMIF Prototype Accelerator LIPAC

840

J. Castellanos, B. Brañas, J. Mollá, C. Oliver, I. Podadera, F. Toral
CIEMAT, Madrid, Spain
R. Iturbe, B. López
ANTEC Magnets SLU, Vizcaya, Spain
O. Nomen
IREC, Sant Adria del Besos, Spain

Funding: This work has been funded by the Spanish Ministry of Economy and Competitiveness under the Agreement as published in BOE, 16/01/2013, page 1988.
The Medium Energy Beam Transport line (MEBT) that is being installed on the LIPAC accelerator* will have five quadrupole and steerer magnets which have been recently manufactured and tested. The design of the magnets was done by CIEMAT** and considers a magnetic yoke made of four solid iron quadrants joined together. The yoke integrates four water-cooled coils (quadrupole) and eight air-cooled coils (steerers) made of copper wires. The manufacturing and testing (excluded magnetic measurements) of the five magnets were carried out by the Spanish company ANTECSA. This paper focuses on the technical aspects considered during the manufacturing and the assembly of the different components of the magnets. The details about the geometrical, electrical and hydraulic measurements and tests that were carried out before the magnetic measurements are also described.
* A. Mosnier et al., IPAC10, MOPEC056, p.588, Kyoto, Japan (2010)
** C. Oliver et al., IPAC11, WEPO014, p. 2424, San Sebastián, Spain (2011)

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-THPRC031

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)