The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Castellanos, J. AU - Brañas, B. AU - Iturbe, R. AU - López, B. AU - Mollá, J. AU - Nomen, O. AU - Oliver, C. AU - Podadera, I. AU - Toral, F. ED - Yamazaki, Yoshishige ED - Facco, Alberto ED - McCausey, Amy ED - Schaa, Volker RW TI - Manufacturing of MEBT Combined Quadrupole & Steerer Magnets for the Linear IFMIF Prototype Accelerator LIPAC J2 - Proc. of LINAC2016, East Lansing, MI, USA, 25-30 September 2016 C1 - East Lansing, MI, USA T2 - Linear Accelerator Conference T3 - 28 LA - english AB - The Medium Energy Beam Transport line (MEBT) that is being installed on the LIPAC accelerator* will have five quadrupole and steerer magnets which have been recently manufactured and tested. The design of the magnets was done by CIEMAT** and considers a magnetic yoke made of four solid iron quadrants joined together. The yoke integrates four water-cooled coils (quadrupole) and eight air-cooled coils (steerers) made of copper wires. The manufacturing and testing (excluded magnetic measurements) of the five magnets were carried out by the Spanish company ANTECSA. This paper focuses on the technical aspects considered during the manufacturing and the assembly of the different components of the magnets. The details about the geometrical, electrical and hydraulic measurements and tests that were carried out before the magnetic measurements are also described. PB - JACoW CP - Geneva, Switzerland SP - 840 EP - 842 KW - quadrupole KW - radiation KW - factory KW - beam-transport KW - vacuum DA - 2017/05 PY - 2017 SN - 978-3-95450-169-4 DO - 10.18429/JACoW-LINAC2016-THPRC031 UR - http://jacow.org/linac2016/papers/thprc031.pdf ER -