LINAC2016 - List of Authors (Apsimon, R.)

Paper	Title	Page
MOPLR066	ProBE: Proton Boosting Extension for Imaging and Therapy	283
	S. Pitman, R. Apsimon, G. Burt Cockcroft Institute, Lancaster University, Lancaster, United Kingdom A.F. Green, H.L. Owen UMAN, Manchester, United Kingdom A. Grudiev, A. Solodko, W. Wuensch CERN, Geneva, Switzerland
	Funding: This work was funded by STFC and IPS Proton beam therapy has been shown to be a promising alternative to traditional radiotherapy, especially for paedi- atric malignancies and radio-resistant tumours. Allowing a highly precise tumour irradiation, it is currently limited by range verification. Several imaging modalities can be utilised for treatment planning, but typically X-ray CT is used. CT scans require conversion from Hounsfield units to estimate the proton stopping power (PSP) of the tissue be- ing treated, and this produces inaccuracy. Proton CT (pCT) measures PSP and is thought to allow an improvement of the treatment accuracy. The Christie Hospital will use a 250 MeV cyclotron for proton therapy, in this paper a pulsed linac upgrade is proposed, to provide 350 MeV protons for pCT within the facility. Space contraints require a compact, high gradient (HG) solution that is reliable and affordable.
	Poster MOPLR066 [0.610 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-MOPLR066
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRC016	S-Band Booster Design and Emittance Preservation for the Awake e-Injector	449
	O. Mete Apsimon, R. Apsimon, G. Burt Cockcroft Institute, Lancaster University, Lancaster, United Kingdom S. Döbert CERN, Geneva, Switzerland G.X. Xia UMAN, Manchester, United Kingdom
	AWAKE is a proton driven plasma wakefield acceleration experiment at CERN which uses the protons from the SPS. It aims to study the self modulation instability of a proton bunch and the acceleration of an externally injected electron beam in the plasma wakefields, during the so called Phase II until the technical stop of LHC and its injector chain (LS2) in 2019. The external electron beam of 0.1 to 1nC charge per bunch will be generated using an S-band photo injector with a high QE semiconducting cathode. A booster linac was designed to allow variable electron energy for the plasma experiments from 16 to 20 MeV. For an RF gun and booster system, emittance control can be highlighted as a challenging transmission task. Once the beam emittance is compensated at the gun exit and the beam is delivered to the booster with an optimum beam envelope, fringing fields and imperfections in the linac become critical for preserving the injection emittance. This paper summarises the rf design studies in order to preserve the initial beam emittance at the entrance of the linac and alternative mitigation schemes in case of emittance growth.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPRC016
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

ProBE: Proton Boosting Extension for Imaging and Therapy

283

S. Pitman, R. Apsimon, G. Burt
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
A.F. Green, H.L. Owen
UMAN, Manchester, United Kingdom
A. Grudiev, A. Solodko, W. Wuensch
CERN, Geneva, Switzerland

Funding: This work was funded by STFC and IPS
Proton beam therapy has been shown to be a promising alternative to traditional radiotherapy, especially for paedi- atric malignancies and radio-resistant tumours. Allowing a highly precise tumour irradiation, it is currently limited by range verification. Several imaging modalities can be utilised for treatment planning, but typically X-ray CT is used. CT scans require conversion from Hounsfield units to estimate the proton stopping power (PSP) of the tissue be- ing treated, and this produces inaccuracy. Proton CT (pCT) measures PSP and is thought to allow an improvement of the treatment accuracy. The Christie Hospital will use a 250 MeV cyclotron for proton therapy, in this paper a pulsed linac upgrade is proposed, to provide 350 MeV protons for pCT within the facility. Space contraints require a compact, high gradient (HG) solution that is reliable and affordable.

Poster MOPLR066 [0.610 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-MOPLR066

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRC016

S-Band Booster Design and Emittance Preservation for the Awake e-Injector

449

O. Mete Apsimon, R. Apsimon, G. Burt
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
S. Döbert
CERN, Geneva, Switzerland
G.X. Xia
UMAN, Manchester, United Kingdom

AWAKE is a proton driven plasma wakefield acceleration experiment at CERN which uses the protons from the SPS. It aims to study the self modulation instability of a proton bunch and the acceleration of an externally injected electron beam in the plasma wakefields, during the so called Phase II until the technical stop of LHC and its injector chain (LS2) in 2019. The external electron beam of 0.1 to 1nC charge per bunch will be generated using an S-band photo injector with a high QE semiconducting cathode. A booster linac was designed to allow variable electron energy for the plasma experiments from 16 to 20 MeV. For an RF gun and booster system, emittance control can be highlighted as a challenging transmission task. Once the beam emittance is compensated at the gun exit and the beam is delivered to the booster with an optimum beam envelope, fringing fields and imperfections in the linac become critical for preserving the injection emittance. This paper summarises the rf design studies in order to preserve the initial beam emittance at the entrance of the linac and alternative mitigation schemes in case of emittance growth.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2016-TUPRC016

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)