LINAC2012 - List of Authors (Hayano, H.)

Paper

Title

Page

Non-destructive Inspections for SC Cavities

156

Y. Iwashita, Y. Fuwa, M. Hashida, K. Otani, S. Sakabe, S. Tokita, H. Tongu
Kyoto ICR, Uji, Kyoto, Japan
H. Hayano, K. Watanabe, Y. Yamamoto
KEK, Ibaraki, Japan

Non-destructive Inspections play important roles to improve yield in production of high-performance SC Cavities. Starting from the high-resolution camera for inspection of the cavity inner surface, high resolution T-map, X-map and eddy current scanner have been developed. We are also investigating radiography to detect small voids inside the Nb EBW seam, where the target resolution is 0.1 mm. We are carrying out radiography tests with X-rays induced from an ultra short pulse intense laser. Recent progress will be presented.

Slides MOPLB07 [5.810 MB]

MOPB025

1ms Multi-bunch Electron Beam Acceleration by a Normal Conducting RF Gun and Superconducting Accelerator

228

M. Kuriki, S. Hosoda, H. Iijima
HU/AdSM, Higashi-Hiroshima, Japan
H. Hayano, J. Urakawa, K. Watanabe
KEK, Ibaraki, Japan
G. Isoyama, R. Kato, K. Kawase
ISIR, Osaka, Japan
S. Kashiwagi
Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
A. Kuramoto
Sokendai, Ibaraki, Japan
K. Sakaue
RISE, Tokyo, Japan

Funding: Quantum Beam Project by MEXT, Japan
We perform electron beam generation and acceleration of 1 ms long pulse and multi-bunch format at KEK-STF (Superconducting Test Facility). The 1 ms long pulse beam is generated by a normal conducting photo-cathode L-band RF gun. The beam is boosted up to 40 MeV by a super-conducting accelerator. Aim of STF is to establish the super-conducting accelerator technology for ILC (International Linear Collider). The facility is concurrently used to demonstrate high brightness X-ray generation by inverse laser Compton scattering supported by MEXT Quantum Beam project. The RF gun cavity has been fabricated by DESY-FNAL-KEK collaboration. After conditioning process, a stable operation of the cavity up to 4.0 MW RF input with 1 ms pulse was achieved by keeping low dark current. 1 ms pulse generation and acceleration has been confirmed in March 2012. Quasi-monochromatic X-ray generation experiment by Laser-Compton will be carried out at STF from the next coming July. We report the latest status of STF.

MOPB053

Non-destructive Inspections for SC Cavities

294

Y. Iwashita, Y. Fuwa, M. Hashida, K. Otani, S. Sakabe, S. Tokita, H. Tongu
Kyoto ICR, Uji, Kyoto, Japan
H. Hayano, K. Watanabe, Y. Yamamoto
KEK, Ibaraki, Japan

Non-destructive Inspections play important roles to improve yield in production of high-performance SC Cavities. Starting from the high-resolution camera for inspection of the cavity inner surface, high resolution T-map, X-map and eddy current scanner have been developed. We are also investigating radiography to detect small voids inside the Nb EBW seam, where the target resolution is 0.1 mm. We are carrying out radiography tests with X-rays induced from an ultra short pulse intense laser. Recent progress will be presented.

MOPB069

Study of HPR Created Oxide Layer at Nb Surfaces

336

P.V. Tyagi
Sokendai, Ibaraki, Japan
H. Hayano, S. Kato, T. Saeki, M. Sawabe
KEK, Ibaraki, Japan

The performance of superconducting radio frequency (SRF) niobium (Nb) cavities strongly depends on final surface condition. Therefore the surface preparation of these SRF cavities often becomes critical. The preparation of surface includes two steps; surface chemistry (in order to get a smooth surface) and cleaning/rinsing (in order to remove contaminants left after the surface chemistry). As high pressure rinsing (HPR) with ultra pure water (UPW) is most commonly used surface cleaning method after the surface chemistry, it's very interesting to characterize the Nb surfaces after HPR. Results of our surface characterization done by XPS (x-ray photoelectron spectroscopy) with depth profiling show the presence of a thicker oxide surface characterization results show the presence of a thicker oxide layer at Nb surface as an outcome of HPR. In this article, we report the production of oxide layer (FWHM thickness) based on different conditions such as the pressures and doses.

TH1A01

Results Achieved by the S1-Global Collaboration for ILC

748

H. Hayano, M. Akemoto, S. Fukuda, K. Hara, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya
KEK, Ibaraki, Japan
C. Adolphsen, C.D. Nantista
SLAC, Menlo Park, California, USA
T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith
Fermilab, Batavia, USA
A. Bosotti, R. Paparella, P. Pierini
INFN/LASA, Segrate (MI), Italy
K. Jensch, D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise
DESY, Hamburg, Germany
C. Pagani
Università degli Studi di Milano & INFN, Segrate, Italy

The S1-Global collaboration (scope and plans presented at Linac10) ended successfully in 2011. In the S1-Global experiment several variants of ILC components (e.g. cavities, tuners, modules, couplers) proposed by all SCRF collaborators worldwide have been extensively tested and their performances compared, in order to build consensus for the technical choices towards the ILC TDR and to develop further the concept of plug-compatible components for ILC. The experiment has been carried at KEK with contribution of hardware and manpower from all collaborators.

Slides TH1A01 [6.656 MB]

Paper	Title	Page
MOPLB07	Non-destructive Inspections for SC Cavities	156
	Y. Iwashita, Y. Fuwa, M. Hashida, K. Otani, S. Sakabe, S. Tokita, H. Tongu Kyoto ICR, Uji, Kyoto, Japan H. Hayano, K. Watanabe, Y. Yamamoto KEK, Ibaraki, Japan
	Non-destructive Inspections play important roles to improve yield in production of high-performance SC Cavities. Starting from the high-resolution camera for inspection of the cavity inner surface, high resolution T-map, X-map and eddy current scanner have been developed. We are also investigating radiography to detect small voids inside the Nb EBW seam, where the target resolution is 0.1 mm. We are carrying out radiography tests with X-rays induced from an ultra short pulse intense laser. Recent progress will be presented.
	Slides MOPLB07 [5.810 MB]

MOPB025	1ms Multi-bunch Electron Beam Acceleration by a Normal Conducting RF Gun and Superconducting Accelerator	228
	M. Kuriki, S. Hosoda, H. Iijima HU/AdSM, Higashi-Hiroshima, Japan H. Hayano, J. Urakawa, K. Watanabe KEK, Ibaraki, Japan G. Isoyama, R. Kato, K. Kawase ISIR, Osaka, Japan S. Kashiwagi Tohoku University, Research Center for Electron Photon Science, Sendai, Japan A. Kuramoto Sokendai, Ibaraki, Japan K. Sakaue RISE, Tokyo, Japan
	Funding: Quantum Beam Project by MEXT, Japan We perform electron beam generation and acceleration of 1 ms long pulse and multi-bunch format at KEK-STF (Superconducting Test Facility). The 1 ms long pulse beam is generated by a normal conducting photo-cathode L-band RF gun. The beam is boosted up to 40 MeV by a super-conducting accelerator. Aim of STF is to establish the super-conducting accelerator technology for ILC (International Linear Collider). The facility is concurrently used to demonstrate high brightness X-ray generation by inverse laser Compton scattering supported by MEXT Quantum Beam project. The RF gun cavity has been fabricated by DESY-FNAL-KEK collaboration. After conditioning process, a stable operation of the cavity up to 4.0 MW RF input with 1 ms pulse was achieved by keeping low dark current. 1 ms pulse generation and acceleration has been confirmed in March 2012. Quasi-monochromatic X-ray generation experiment by Laser-Compton will be carried out at STF from the next coming July. We report the latest status of STF.

MOPB053	Non-destructive Inspections for SC Cavities	294
	Y. Iwashita, Y. Fuwa, M. Hashida, K. Otani, S. Sakabe, S. Tokita, H. Tongu Kyoto ICR, Uji, Kyoto, Japan H. Hayano, K. Watanabe, Y. Yamamoto KEK, Ibaraki, Japan
	Non-destructive Inspections play important roles to improve yield in production of high-performance SC Cavities. Starting from the high-resolution camera for inspection of the cavity inner surface, high resolution T-map, X-map and eddy current scanner have been developed. We are also investigating radiography to detect small voids inside the Nb EBW seam, where the target resolution is 0.1 mm. We are carrying out radiography tests with X-rays induced from an ultra short pulse intense laser. Recent progress will be presented.

MOPB069	Study of HPR Created Oxide Layer at Nb Surfaces	336
	P.V. Tyagi Sokendai, Ibaraki, Japan H. Hayano, S. Kato, T. Saeki, M. Sawabe KEK, Ibaraki, Japan
	The performance of superconducting radio frequency (SRF) niobium (Nb) cavities strongly depends on final surface condition. Therefore the surface preparation of these SRF cavities often becomes critical. The preparation of surface includes two steps; surface chemistry (in order to get a smooth surface) and cleaning/rinsing (in order to remove contaminants left after the surface chemistry). As high pressure rinsing (HPR) with ultra pure water (UPW) is most commonly used surface cleaning method after the surface chemistry, it's very interesting to characterize the Nb surfaces after HPR. Results of our surface characterization done by XPS (x-ray photoelectron spectroscopy) with depth profiling show the presence of a thicker oxide surface characterization results show the presence of a thicker oxide layer at Nb surface as an outcome of HPR. In this article, we report the production of oxide layer (FWHM thickness) based on different conditions such as the pressures and doses.

TH1A01	Results Achieved by the S1-Global Collaboration for ILC	748
	H. Hayano, M. Akemoto, S. Fukuda, K. Hara, N. Higashi, E. Kako, H. Katagiri, Y. Kojima, Y. Kondo, T. Matsumoto, S. Michizono, T. Miura, H. Nakai, H. Nakajima, K. Nakanishi, S. Noguchi, N. Ohuchi, T. Saeki, T. Shidara, T. Shishido, T. Takenaka, A. Terashima, N. Toge, K. Tsuchiya, K. Watanabe, S. Yamaguchi, A. Yamamoto, Y. Yamamoto, K. Yokoya KEK, Ibaraki, Japan C. Adolphsen, C.D. Nantista SLAC, Menlo Park, California, USA T.T. Arkan, S. Barbanotti, M.A. Battistoni, H. Carter, M.S. Champion, A. Hocker, R.D. Kephart, J.S. Kerby, D.V. Mitchell, T.J. Peterson, Y.M. Pischalnikov, M.C. Ross, W. Schappert, B.E. Smith Fermilab, Batavia, USA A. Bosotti, R. Paparella, P. Pierini INFN/LASA, Segrate (MI), Italy K. Jensch, D. Kostin, L. Lilje, A. Matheisen, W.-D. Möller, P. Schilling, M. Schmökel, N.J. Walker, H. Weise DESY, Hamburg, Germany C. Pagani Università degli Studi di Milano & INFN, Segrate, Italy
	The S1-Global collaboration (scope and plans presented at Linac10) ended successfully in 2011. In the S1-Global experiment several variants of ILC components (e.g. cavities, tuners, modules, couplers) proposed by all SCRF collaborators worldwide have been extensively tested and their performances compared, in order to build consensus for the technical choices towards the ILC TDR and to develop further the concept of plug-compatible components for ILC. The experiment has been carried at KEK with contribution of hardware and manpower from all collaborators.
	Slides TH1A01 [6.656 MB]