Author: Harms, E.R.
Paper Title Page
MOPB054 Test Results of Tesla-style Cryomodules at Fermilab 297
 
  • E.R. Harms, K. Carlson, B. Chase, D.J. Crawford, E. Cullerton, D.R. Edstrom, Jr, A. Hocker, M.J. Kucera, J.R. Leibfritz, O.A. Nezhevenko, D.J. Nicklaus, Y.M. Pischalnikov, P.S. Prieto, J. Reid, W. Schappert, P. Varghese
    Fermilab, Batavia, USA
 
  Funding: Operated by Fermi Research Alliance, LLC under Contract No. DE-AC02-07CH11359 with the United States Department of Energy.
Commissioning and operation of the first Tesla-style Cryomodule (CM-1) at Fermilab was concluded in recent months. It has now been replaced by a second Tesla Type III+ module, RFCA002. It is the first 8-cavity ILC style cryomodule to be built at Fermilab and also the first accelerating cryomodule of the Advanced Superconducting Test Accelerator (ASTA). We report on the operating results of both of these cryomodules.
 
 
MOPB077 Lorentz Force Detuning Compensation Studies for Long Pulses in ILC type SRF Cavities 354
 
  • N. Solyak, G.I. Cancelo, B. Chase, D.J. Crawford, D.R. Edstrom, Jr, E.R. Harms, Y.M. Pischalnikov, W. Schappert
    Fermilab, Batavia, USA
 
  Project-X 3-8 GeV pulsed linac is based on ILC type 1.3 GHz elliptical cavities. The cavity will operate at 25 MV/m accelerating gradient, but in contrast with XFEL and ILC projects the required loaded Q is much higher (Q=107) and RF pulse is much longer (~8ms). For these parameters Lorence force detuning (LFD) and microphonics should be controlled at the level <30 Hz. A new algorithm of LFD compensation, developed at Fermilab for ILC cavities was applied for Lorentz force compensation studies for 8ms pulses. In these studies two cavities inside TESLA-type cryomodule at Fermilab NML facility have been powered by one klystron. Studies done for different cavity gradients and different values of loaded Q demonstrated that required compensation are achievable. Detuning measurements and compensation results are presented.  
 
TUPB020 Status of the European XFEL 3.9 GHz system 519
 
  • E. Vogel
    DESY, Hamburg, Germany
  • A. Bosotti, P. Michelato, L. Monaco, C. Pagani, R. Paparella, P. Pierini, D. Sertore
    INFN/LASA, Segrate (MI), Italy
  • E.R. Harms
    Fermilab, Batavia, USA
 
  The third harmonic system at 3.9 GHz of the European XFEL injector section will linearize the bunch RF curvature, induced by first accelerating module, before the first compression stage. This paper presents qualification tests on cavity prototypes and the on-going activities towards the realization of the third harmonic section of the European XFEL in view of its commissioning in 2014.