| Paper |
Title |
Page |
| MOP044 |
The High-Intensity Superconducting Linac for the SPIRAL 2 Project at GANIL
|
142 |
| |
- T. Junquera
IPN, Orsay
- P. Bertrand, R. Ferdinand, M. Jacquemet
GANIL, Caen
|
|
| |
After a detailed design study phase (2003-2004), the Spiral 2 project at GANIL was officially approved in May 2005. The project group for the construction was launched in July 2005, with the participation of French laboratories (CEA, CNRS) and international partners. The Spiral 2 Driver Accelerator is composed of an injector (protons, deuterons and heavy ions with q/A=1/3), a room temperature RFQ, and a superconducting linac with two beta families of Quarter Wave Resonators. It will deliver high intensity beams for Radioactive Ions production by the ISOL method and stable heavy ions for nuclear and interdisciplinary physics. High intensity neutrons beams will also be delivered for irradiation and time of flight experiments. In this paper we focus on the High Intensity Driver Accelerator design and the results obtained with the first prototypes of several major components.
|
|
| THP052 |
Tests Results of Beta 0.12 Quarter-Wave Resonator for the SPIRAL2 Superconducting Linac
|
698 |
| |
- G. Olry, S. Blivet, S. Bousson, T. Junquera, J. Lesrel, fl. Lutton, G. Martinet, H. Saugnac
IPN, Orsay
|
|
| |
New developments and tests have been carried out, at IPN-Orsay, on high β = 0.12, 88 MHz superconducting Quarter Wave Resonators. These resonators will be installed in the high beta section of the LINAC driver. RF tests results of the prototype cavity are reported. The fabrication of 2 pre-series cavities and their cryomodule is in progress in order to be ready for high power RF tests at 4.2 K at the beginning of 2007.
|
|