Paper | Title | Page |
---|---|---|
MOOYSP1 | Impact of Longitudinal Gradient Dipoles on Storage Ring Performance | 30 |
|
||
Funding: This project has received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 101004730 (iFAST). Innovative new magnets with longitudinally varying dipole field are being produced for installation in a few modern light-source storage rings. We investigate some of the associated beam-dynamics issues, in particular the photon spectrum and quantum fluctuation associated with such magnets, and we study whether the resulting equilibrium emittance may deviate from the value expected in the long-magnet limit. |
||
![]() |
Slides MOOYSP1 [2.364 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOOYSP1 | |
About • | Received ※ 08 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 12 June 2022 — Issue date ※ 17 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
MOPOST056 | Interplay between Space Charge and Intra-beam Scattering for the CERN Ion Injectors | 214 |
SUSPMF073 | use link to see paper's listing under its alternate paper code | |
|
||
The CERN ion injectors, SPS and LEIR, operate in a strong space charge and intra-beam scattering regime, which can lead to degradation of their beam performance. To optimize machine performance requires thus to study the interplay of these two effects in combined space charge and intrabeam scattering tracking simulations. In this respect, the kinetic theory approach of intra-beam scattering has been implemented in pyORBIT and benchmarked against analytical models. First results of combined space charge and intra-beam scattering simulations for SPS and LEIR are presented in this contribution. The simulation results are compared with observations from beam measurements. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOST056 | |
About • | Received ※ 07 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 07 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEOZSP2 | Suppression of Crab Cavity Noise Induced Emittance Growth by Transverse Beam Coupling Impedance | 1659 |
SUSPMF068 | use link to see paper's listing under its alternate paper code | |
|
||
Crab Cavities are a key component of the High Luminosity LHC (HL-LHC) upgrade, as they aim to minimize the luminosity reduction caused by the crossing angle. Two superconducting crab cavities were installed in the Super Proton Synchrotron (SPS) at CERN in 2018 to test their operation in a proton machine for the first time. An important point to consider is the increase in transverse emittance induced by noise in the Low-Level RF (LLRF) system. During the first experimental campaign in 2018, the measured emittance growth was found to be a factor of 4 lower than predicted by the available analytical models. In this report, the effects of transverse beam impedance in the presence of CC LLRF noise on transverse emittance growth are presented and the results of the second experimental campaign, which took place in the SPS in 2021, are discussed. | ||
![]() |
Slides WEOZSP2 [2.694 MB] | |
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEOZSP2 | |
About • | Received ※ 08 June 2022 — Revised ※ 12 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 15 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPOPT009 | Operational Scenario of First High Luminosity LHC Run | 1846 |
|
||
A new scenario for the first operational run of the HL-LHC era (Run 4) has been recently developed to accommodate a period of performance ramp-up to achieve an annual integrated luminosity close to the nominal HL-LHC design. The operational scenario in terms of beam parameters and machine settings, as well as the different phases, are described here along with the impact of potential delays on key hardware components. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT009 | |
About • | Received ※ 19 May 2022 — Revised ※ 15 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 09 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
THPOPT013 | Emittance Reduction with the Variable Dipole for the ELETTRA 2.0 Ring | 2586 |
|
||
ELETTRA is a 2/2.4 GeV third-generation electron storage ring, located near Trieste, Italy. In view of a substantial increase of the machine performance in terms of brilliance, the so-called ELETTRA 2.0 upgrade is currently on-going. This upgrade is based on a 6-bends achromat, four dipoles of which having a longitudinally variable field. So far, those dipoles are foreseen to provide a field with a two step profile. The VAriable Dipole for the ELETTRA Ring (VADER) task, driven by the I.FAST European project, aims at developing a new dipole design based on a trapezoidal shape of the bending radius, which would allow for a further reduction of the horizontal emittance. A prototype of this magnet should be designed by the CIEMAT laboratory and built by KYMA company. This paper discusses the new dipole field specification and describes the corresponding optics optimization that was performed in order to reduce at best the emittance of the ELETTRA ring. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOPT013 | |
About • | Received ※ 07 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 03 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |