Paper | Title | Page |
---|---|---|
MOPOST045 | A Novel Tool for Beam Dynamics Studies with Hollow Electron Lenses | 176 |
|
||
Hollow Electron Lenses (HELs) are crucial components of the CERN LHC High Luminosity Upgrade (HL-LHC), serving the purpose of actively controlling the population of the transverse beam halo to reduce particle losses on the collimation system. Symplectic particle tracking simulations are required to optimize the efficiency and study potentially undesired beam dynamics effects with the HELs. With the relevant time scales in the collider in the order of several minutes, tracking simulations require considerable computing resources. A new tracking tool, Xsuite, developed at CERN since 2021, offers the possibility of performing such tracking simulations using graphics processing units (GPUs), with promising perspectives for the simulation of hadron beam dynamics with HELs. In this contribution, we present the implementation of HEL physics effects in the new tracking framework. We compare the performance with previous tools and show simulation results obtained using known and newly established simulation setups. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOST045 | |
About • | Received ※ 08 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 22 June 2022 — Issue date ※ 08 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
TUPOTK062 | Settings for Improved Betatron Collimation in the First Run of the High Luminosity LHC | 1366 |
|
||
Funding: This work was supported by the High Luminosity LHC project The current betatron collimation system in the LHC is not optimized to absorb off-momentum particles scattered out from the primary collimators. The highest losses are concentrated in the downstream dispersion suppressor (DS). Given the increased beam intensity in the High Luminosity LHC (HL-LHC), there is concern that these losses could risk quenching the superconducting DS magnets. Consequently, a dedicated upgrade of the DS has been studied. However, at this stage, the deployment for the startup of the HL-LHC is uncertain due to delays in the availability of high-field magnets needed to integrate new collimators into the DS. In this paper, we describe the expected collimation setup for the first run of the HL-LHC and explore various techniques to improve the collimation cleaning. These include exploiting the asymmetric response of the two jaws of each primary collimator and adjusting the locally generated dispersion in the collimation insertion. |
||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOTK062 | |
About • | Received ※ 07 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 23 June 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPOPT009 | Operational Scenario of First High Luminosity LHC Run | 1846 |
|
||
A new scenario for the first operational run of the HL-LHC era (Run 4) has been recently developed to accommodate a period of performance ramp-up to achieve an annual integrated luminosity close to the nominal HL-LHC design. The operational scenario in terms of beam parameters and machine settings, as well as the different phases, are described here along with the impact of potential delays on key hardware components. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT009 | |
About • | Received ※ 19 May 2022 — Revised ※ 15 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 09 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |
WEPOPT012 | MAD-X for Future Accelerators | 1858 |
|
||
The development of MAD-X was started more than 20 years ago and it still remains the main tool for single particle dynamics for both optics design, error studies as well as for operational model-based software at CERN. In this article, we outline some of the recent development of MAD-X and plans for the future. In particular, we focus on the development of the twiss module used to calculate optics functions in MAD-X which is based on first and second order matrices. These have traditionally been calculated as an expansion around the ideal orbit. In this paper, we describe explicitly how an expansion around the closed orbit can be employed instead, in order to get more precise results. We also describe the latest development of the beam-beam long range wire compensator in MAD-X, an element that has been implemented using the aforementioned approach. | ||
DOI • | reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-WEPOPT012 | |
About • | Received ※ 08 June 2022 — Revised ※ 14 June 2022 — Accepted ※ 23 June 2022 — Issue date ※ 01 July 2022 | |
Cite • | reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml) | |