IPAC2022 - List of Authors (Bodenstein, R.M.)

Paper	Title	Page
MOPOTK012	Concept of a Polarized Positron Source for CEBAF	457
SUSPMF058	use link to see paper's listing under its alternate paper code
	S.H. Habet, R.M. Bodenstein, S.A. Bogacz, J.M. Grames, A.S. Hofler, R. Kazimi, F. Lin, M. Poelker, Y. Roblin, A. Seryi, R. Suleiman, A.V. Sy, D.L. Turner JLab, Newport News, Virginia, USA A. Ushakov Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France C.A. Valerio-Lizárraga ECFM-UAS, Culiacan, Sinaloa, Mexico E.J-M. Voutier LPSC, Grenoble Cedex, France
	Funding: Laboratoire de Physique des 2 Infinis Irène Joliot-Curie Université Paris-Saclay -> Eric Voutier : eric.voutier@ijclab.in2p3.fr. Positron beams would provide new and meaningful probes for the experimental program at the Thomas Jefferson National Accelerator Facility (JLab), including but not limited to future hadronic physics and dark matter experiments. Critical requirements involve generating positron beams with a high degree of spin polarization, sufficient intensity and a continuous-wave (CW) bunch train compatible with acceleration to 12 GeV at the Continuous Electron Beam Accelerator Facility (CEBAF). To address these requirements, a polarized positron injector based upon the bremsstrahlung of an intense CW spin polarized electron beam is considered. First a polarized electron beam line provides >1 mA of polarized electrons at ~120 MeV to a high-power target for positron production. Next, a second beam line collects, shapes and aligns the spin of positrons for users. Finally, the positron beam is matched into the CEBAF acceptance for acceleration and transport to the end stations with energies up to 12 GeV. An optimized layout to provide positrons beams with intensity >100 nA (polarized) or intensity >3 µA (unpolarized) will be discussed in this poster. D. Abbott et al., "Production of Highly Polarized Positrons Using Polarized Electrons at MeV Energies", Phys. Rev. Lett., 116, 214801 (2016)
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK012
About •	Received ※ 08 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 06 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOTK050	Linac Optics Optimization with Multi-Objective Optimization	572
SUSPMF060	use link to see paper's listing under its alternate paper code
	I. Neththikumara, T. Satogata ODU, Norfolk, Virginia, USA R.M. Bodenstein, S.A. Bogacz, T. Satogata JLab, Newport News, Virginia, USA A. Vandenhoeke ULB, Bruxelles, Belgium
	Funding: This material is based upon work supported by the U.S. Department of Energy under contract DE-AC05-06OR23177. The beamline design of recirculating linacs requires special attention to avoid beam instabilities due to RF wakefields. A proposed high-energy, multi-pass energy recovery demonstration at CEBAF uses a low beam current. Stronger focusing at lower energies is necessary to avoid beam breakup(BBU) instabilities, even with this small beam current. The CEBAF linac optics optimization balances over-focusing at higher energies and beta excursions at lower energies. Using proper mathematical expressions, linac optics optimization can be achieved with evolutionary algorithms. Here, we present the optimization process of North Linac optics using multi-objective optimization.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK050
About •	Received ※ 31 May 2022 — Revised ※ 14 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 10 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOTK053	RLAs with FFA Arcs for Protons and Electrons	584
	V.S. Morozov ORNL RAD, Oak Ridge, Tennessee, USA J.F. Benesch, R.M. Bodenstein, S.A. Bogacz, A. Coxe, K.E. Deitrick, D. Douglas, B.R. Gamage, G.A. Krafft, K.E.Price. Price, Y. Roblin, A. Seryi JLab, Newport News, Virginia, USA J.S. Berg, S.J. Brooks, F. Méot, D. Trbojevic BNL, Upton, New York, USA D. Douglas Douglas Consulting, York, Virginia, USA G.H. Hoffstaetter Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Funding: Authored in part by UT-Battelle, LLC, Jefferson Science Associates, LLC, and Brookhaven Science Associates, LLC under Contracts DE-AC05-00OR22725, DE-AC05-06OR23177, and DE-SC0012704 with the US DOE. Recirculating Linear Accelerators (RLAs) provide an efficient way of producing high-power, high-quality, continuous-wave hadron and lepton beams. However, their attractiveness had been limited by the cumbersomeness of multiple recirculating arcs and by the complexity of the spreader and recombiner regions. The latter problem sets one of the practical limitations on the maximum number of recirculations. We present an RLA design concept where the problem of multiple arcs is solved using the Fixed-Field Alternating gradient (FFA) design as in CBETA. The spreader/recombiner design is greatly simplified using an adiabatic matching approach. It allows for the spreader/recombiner function to be accomplished by a single beam line. The concept is applied to the designs of a high-power hadron accelerator being considered at ORNL and a CEBAF electron energy doubling project, FFA@CEBAF, being developed at Jefferson lab.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK053
About •	Received ※ 10 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 21 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOZGD1	Need for Portable Accelerators in Cultural Heritage	808
	T.K. Charles The University of Liverpool, Liverpool, United Kingdom R.M. Bodenstein, A. Castilla JLab, Newport News, Virginia, USA
	Ion Beam Accelerators (IBA) centres have provided researchers with powerful techniques to analyse objects of cultural significance in a non-destructive and non-invasive manner. However, in some cases it is not feasible to remove an object from the field or museum and transport it to the laboratory. In this contributed talk, we present as a manner of a short review, examples of the benefits provided from these techniques in the study of material culture and discuss the initial steps to consider when investigating the feasibility of a compact accelerator that can be taken to sites of cultural significance for PIXE analysis. In particular, we consider the application of a compact, robust 2 MeV proton accelerator that can be taken into the field to perform PIXE measurements on rock art. We detail the main challenges and considerations for such a device.
	Slides TUOZGD1 [7.603 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUOZGD1
About •	Received ※ 09 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 09 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOST011	Simulation Studies of Intra-Train, Bunch-by-Bunch Feedback Systems at the International Linear Collider	861
	R.L. Ramjiawan, D.R. Bett, P. Burrows, C. Perry JAI, Oxford, United Kingdom D.R. Bett CERN, Meyrin, Switzerland R.M. Bodenstein JLab, Newport News, Virginia, USA G.B. Christian DLS, Oxfordshire, United Kingdom
	The International Linear Collider (ILC) is a proposed electron-positron collider targeting collision energies from 250 GeV to 1 TeV. With design luminosities of order 10³⁴ cm²s^-1, a beam-based, intra-train feedback system would be required near the Interaction Point (IP) to provide nanometre-level stabilisation of the beam overlap in the collisions. Here we present results from beam-tracking simulations of the 500 GeV ILC, including the impact of beam-trajectory imperfections on the luminosity, and the capability of the IP feedback system to compensate for them. Effects investigated include the position jitter introduced by the damping ring extraction kicker, short-range and long-range wakefields, and ground motion. The feedback system was shown to be able to correct for beam-beam offsets of up to 200 nm and stabilise the collision overlap to the nanometre level, within a few bunch crossings.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOST011
About •	Received ※ 03 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 22 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOST023	Current Status of the FFA@CEBAF Energy Upgrade Study	2494
	R.M. Bodenstein, J.F. Benesch, S.A. Bogacz, A. Coxe, K.E. Deitrick, B.R. Gamage, G.A. Krafft, K.E.Price. Price, Y. Roblin, A. Seryi JLab, Newport News, Virginia, USA J.S. Berg, S.J. Brooks, D. Trbojevic BNL, Upton, New York, USA D. Douglas Douglas Consulting, York, Virginia, USA G.H. Hoffstaetter Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA V.S. Morozov ORNL RAD, Oak Ridge, Tennessee, USA
	Funding: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177. This work will describe the current status of the FFA@CEBAF energy upgrade feasibility studies. Technical updates are given, but more specific details are left to separate contributions. Specifically, this work will discuss improvements to the FFA arcs, a new recirculating injector proposal, and numerous modifications to the current 12 GeV CEBAF which will be required, such as the spreaders and recombiners architecture, splitters (time-of-flight chicanes), the extraction system, and the hall lines.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOST023
About •	Received ※ 08 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 06 July 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOPOTK012

Concept of a Polarized Positron Source for CEBAF

457

SUSPMF058

use link to see paper's listing under its alternate paper code

S.H. Habet, R.M. Bodenstein, S.A. Bogacz, J.M. Grames, A.S. Hofler, R. Kazimi, F. Lin, M. Poelker, Y. Roblin, A. Seryi, R. Suleiman, A.V. Sy, D.L. Turner
JLab, Newport News, Virginia, USA
A. Ushakov
Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
C.A. Valerio-Lizárraga
ECFM-UAS, Culiacan, Sinaloa, Mexico
E.J-M. Voutier
LPSC, Grenoble Cedex, France

Funding: Laboratoire de Physique des 2 Infinis Irène Joliot-Curie Université Paris-Saclay -> Eric Voutier : eric.voutier@ijclab.in2p3.fr.
Positron beams would provide new and meaningful probes for the experimental program at the Thomas Jefferson National Accelerator Facility (JLab), including but not limited to future hadronic physics and dark matter experiments. Critical requirements involve generating positron beams with a high degree of spin polarization, sufficient intensity and a continuous-wave (CW) bunch train compatible with acceleration to 12 GeV at the Continuous Electron Beam Accelerator Facility (CEBAF). To address these requirements, a polarized positron injector based upon the bremsstrahlung of an intense CW spin polarized electron beam is considered*. First a polarized electron beam line provides >1 mA of polarized electrons at ~120 MeV to a high-power target for positron production. Next, a second beam line collects, shapes and aligns the spin of positrons for users. Finally, the positron beam is matched into the CEBAF acceptance for acceleration and transport to the end stations with energies up to 12 GeV. An optimized layout to provide positrons beams with intensity >100 nA (polarized) or intensity >3 µA (unpolarized) will be discussed in this poster.
* D. Abbott et al., "Production of Highly Polarized Positrons Using Polarized Electrons at MeV Energies", Phys. Rev. Lett., 116, 214801 (2016)

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK012

About •

Received ※ 08 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 06 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOTK050

Linac Optics Optimization with Multi-Objective Optimization

572

SUSPMF060

use link to see paper's listing under its alternate paper code

I. Neththikumara, T. Satogata
ODU, Norfolk, Virginia, USA
R.M. Bodenstein, S.A. Bogacz, T. Satogata
JLab, Newport News, Virginia, USA
A. Vandenhoeke
ULB, Bruxelles, Belgium

Funding: This material is based upon work supported by the U.S. Department of Energy under contract DE-AC05-06OR23177.
The beamline design of recirculating linacs requires special attention to avoid beam instabilities due to RF wakefields. A proposed high-energy, multi-pass energy recovery demonstration at CEBAF uses a low beam current. Stronger focusing at lower energies is necessary to avoid beam breakup(BBU) instabilities, even with this small beam current. The CEBAF linac optics optimization balances over-focusing at higher energies and beta excursions at lower energies. Using proper mathematical expressions, linac optics optimization can be achieved with evolutionary algorithms. Here, we present the optimization process of North Linac optics using multi-objective optimization.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK050

About •

Received ※ 31 May 2022 — Revised ※ 14 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 10 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPOTK053

RLAs with FFA Arcs for Protons and Electrons

584

V.S. Morozov
ORNL RAD, Oak Ridge, Tennessee, USA
J.F. Benesch, R.M. Bodenstein, S.A. Bogacz, A. Coxe, K.E. Deitrick, D. Douglas, B.R. Gamage, G.A. Krafft, K.E.Price. Price, Y. Roblin, A. Seryi
JLab, Newport News, Virginia, USA
J.S. Berg, S.J. Brooks, F. Méot, D. Trbojevic
BNL, Upton, New York, USA
D. Douglas
Douglas Consulting, York, Virginia, USA
G.H. Hoffstaetter
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Funding: Authored in part by UT-Battelle, LLC, Jefferson Science Associates, LLC, and Brookhaven Science Associates, LLC under Contracts DE-AC05-00OR22725, DE-AC05-06OR23177, and DE-SC0012704 with the US DOE.
Recirculating Linear Accelerators (RLAs) provide an efficient way of producing high-power, high-quality, continuous-wave hadron and lepton beams. However, their attractiveness had been limited by the cumbersomeness of multiple recirculating arcs and by the complexity of the spreader and recombiner regions. The latter problem sets one of the practical limitations on the maximum number of recirculations. We present an RLA design concept where the problem of multiple arcs is solved using the Fixed-Field Alternating gradient (FFA) design as in CBETA. The spreader/recombiner design is greatly simplified using an adiabatic matching approach. It allows for the spreader/recombiner function to be accomplished by a single beam line. The concept is applied to the designs of a high-power hadron accelerator being considered at ORNL and a CEBAF electron energy doubling project, FFA@CEBAF, being developed at Jefferson lab.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-MOPOTK053

About •

Received ※ 10 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 16 June 2022 — Issue date ※ 21 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUOZGD1

Need for Portable Accelerators in Cultural Heritage

808

T.K. Charles
The University of Liverpool, Liverpool, United Kingdom
R.M. Bodenstein, A. Castilla
JLab, Newport News, Virginia, USA

Ion Beam Accelerators (IBA) centres have provided researchers with powerful techniques to analyse objects of cultural significance in a non-destructive and non-invasive manner. However, in some cases it is not feasible to remove an object from the field or museum and transport it to the laboratory. In this contributed talk, we present as a manner of a short review, examples of the benefits provided from these techniques in the study of material culture and discuss the initial steps to consider when investigating the feasibility of a compact accelerator that can be taken to sites of cultural significance for PIXE analysis. In particular, we consider the application of a compact, robust 2 MeV proton accelerator that can be taken into the field to perform PIXE measurements on rock art. We detail the main challenges and considerations for such a device.

Slides TUOZGD1 [7.603 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUOZGD1

About •

Received ※ 09 June 2022 — Revised ※ 13 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 09 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOST011

Simulation Studies of Intra-Train, Bunch-by-Bunch Feedback Systems at the International Linear Collider

861

R.L. Ramjiawan, D.R. Bett, P. Burrows, C. Perry
JAI, Oxford, United Kingdom
D.R. Bett
CERN, Meyrin, Switzerland
R.M. Bodenstein
JLab, Newport News, Virginia, USA
G.B. Christian
DLS, Oxfordshire, United Kingdom

The International Linear Collider (ILC) is a proposed electron-positron collider targeting collision energies from 250 GeV to 1 TeV. With design luminosities of order 10³⁴ cm²s^-1, a beam-based, intra-train feedback system would be required near the Interaction Point (IP) to provide nanometre-level stabilisation of the beam overlap in the collisions. Here we present results from beam-tracking simulations of the 500 GeV ILC, including the impact of beam-trajectory imperfections on the luminosity, and the capability of the IP feedback system to compensate for them. Effects investigated include the position jitter introduced by the damping ring extraction kicker, short-range and long-range wakefields, and ground motion. The feedback system was shown to be able to correct for beam-beam offsets of up to 200 nm and stabilise the collision overlap to the nanometre level, within a few bunch crossings.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOST011

About •

Received ※ 03 June 2022 — Revised ※ 11 June 2022 — Accepted ※ 14 June 2022 — Issue date ※ 22 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOST023

Current Status of the FFA@CEBAF Energy Upgrade Study

2494

R.M. Bodenstein, J.F. Benesch, S.A. Bogacz, A. Coxe, K.E. Deitrick, B.R. Gamage, G.A. Krafft, K.E.Price. Price, Y. Roblin, A. Seryi
JLab, Newport News, Virginia, USA
J.S. Berg, S.J. Brooks, D. Trbojevic
BNL, Upton, New York, USA
D. Douglas
Douglas Consulting, York, Virginia, USA
G.H. Hoffstaetter
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
V.S. Morozov
ORNL RAD, Oak Ridge, Tennessee, USA

Funding: This material is based upon work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177.
This work will describe the current status of the FFA@CEBAF energy upgrade feasibility studies. Technical updates are given, but more specific details are left to separate contributions. Specifically, this work will discuss improvements to the FFA arcs, a new recirculating injector proposal, and numerous modifications to the current 12 GeV CEBAF which will be required, such as the spreaders and recombiners architecture, splitters (time-of-flight chicanes), the extraction system, and the hall lines.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-THPOST023

About •

Received ※ 08 June 2022 — Revised ※ 15 June 2022 — Accepted ※ 17 June 2022 — Issue date ※ 06 July 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)