IPAC2021 - List of Authors (Wang, J.G.)

Paper	Title	Page
TUPAB121	Photoinjector Drive Laser Temporal Shaping for Shanghai Soft X-Ray Free Electron Laser	1674
	C.L. Li, X.T. Wang, W.Y. Zhang Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China X.L. Dai SSRF, Shanghai, People’s Republic of China H.X. Deng, L. Feng, B. Liu, J.G. Wang SARI-CAS, Pudong, Shanghai, People’s Republic of China
	Shanghai soft X ray free electron laser (SXFEL) initial designed shape of the photocathode driver laser is flattop produced by α-BBO stacking. The advantage of this design is attractive in producing electron bunch with low initial emittance and high uniformity along the electron bunch. However, some unavoidable modulations are generated along the laser pulse which trigger the electron bunch modulation generated at the source, which is due to the fast response time (tens of femtosecond) of copper cathode. In order to eliminate the modulation of electron bunch, temporal Gaussian driver laser was designed and tested, measurement results show the electron bunch longitudinal modulation was removed. In this paper, we present two kinds of driver laser pulse temporal shaping methods based on α-BBO stacking and UV grating pair shaping. Moreover, corresponding electron bunch temporal profile are also presented.
	Poster TUPAB121 [2.469 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB121
About •	paper received ※ 19 May 2021 paper accepted ※ 02 June 2021 issue date ※ 25 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB285	High Resolution Arrival Time Measurement of the Seed Laser	3320
	J.G. Wang, H.X. Deng, L. Feng, C.L. Li, B. Liu SARI-CAS, Pudong, Shanghai, People’s Republic of China X.T. Wang, W.Y. Zhang Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China
	The Shanghai soft X-ray Free-Electron Laser facility (SXFEL) is a fourth-generation linac-based light source, capable of producing X-ray pulses with a duration of tens of femtosecond. The seed laser for external seeding FEL, therefore, has tight requirements for relative arrival time to the electron bunch. To reach the required energy and wavelength for external seeding FEL, further optical amplification and frequency conversion is needed. These include reflection and propagation in different material and in air, in addition, also include the long laser transport beamline to the undulator, make the laser pulses arrival time influenced by environmental variation. To reach the required specification, high-resolution measurement of the laser arrival time is necessary. In this paper, we present a general concept for the measurement of the laser arrival time.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB285
About •	paper received ※ 19 May 2021 paper accepted ※ 12 July 2021 issue date ※ 12 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB286	Design of the Laser-to-RF Synchronization at 1.3 GHz for SHINE	3323
	J.G. Wang, H.X. Deng, L. Feng, C.L. Li, B. Liu SARI-CAS, Pudong, Shanghai, People’s Republic of China X.T. Wang, W.Y. Zhang Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China
	A next-generation photo-science facility like Shanghai HIgh repetition rate XFEL aNd Extreme light facility (SHINE) is aiming to generate femtosecond X-ray pulses with unprecedented brightness to film chemical and physical reactions with sub-atomic level spatio-temporal resolution. To fulfill this scientific goal, high-precision timing synchronization is essential. The pulsed optical synchronization has become an indispensable scheme for femtosecond precision synchronization of X-ray free-electron lasers. One of the critical tasks of pulsed optical synchronization is to synchronize various microwave sources. For the future SHINE, ultralow-noise pulses generated by a mode-locked laser are distributed over large distances via stabilized fiber links to all critical facility end-stations. In order to achieve low timing jitter and long-term stability of 1.3 GHz RF reference signal for the accuracy Low-Level RF(RF) field control, an Electro-optical intensity Modulator (EOM) based scheme is being developed at SHINE. In this paper, we present the progress on the design of the optical part and the integrated electronics of the laser-to-RF synchronization.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB286
About •	paper received ※ 20 May 2021 paper accepted ※ 12 July 2021 issue date ※ 28 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB313	Drive Laser System for Shanghai Soft X-Ray Free Electron Laser	4403
	L. Feng, C.L. Li, B. Liu, J.G. Wang SARI-CAS, Pudong, Shanghai, People’s Republic of China X. Lu ANL, Lemont, Illinois, USA X.T. Wang, W.Y. Zhang Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China
	In this paper, we introduce the design and layout of the drive laser of Shanghai Soft X-ray Free Electron Laser (SXFEL). It is known that the temporal and spatial distribution of the drive laser is crucial for high-quality electron beams. The drive laser provides the laser pulse of 266nm wavelength and 8ps pulse duration for the photocathode, as well as 400nm wavelength, 2-20ps tunable pulse duration for the laser heater. For this purpose, there are mainly four parts in such system, including a third-harmonic generation device, pulse stretcher, image transmitted system, and laser optical module for laser heater. Finally, the measured results of the electron beam under this drive laser system are presented and discussed.
	Poster THPAB313 [0.691 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB313
About •	paper received ※ 20 May 2021 paper accepted ※ 15 July 2021 issue date ※ 24 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB314	Development of the Femtosecond Timing Distribution System for the Shanghai Soft X-Ray Free Electron Laser	4406
	L. Feng, C.L. Li, B. Liu, J.G. Wang SARI-CAS, Pudong, Shanghai, People’s Republic of China X.T. Wang, W.Y. Zhang Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China
	High accuracy timing and synchronization system on femtosecond timescale play an important role for free-electron laser projects such as Shanghai Soft X-ray free-electron laser facility (SXFEL), and future Shanghai high repetition rate XFEL and Extreme light facility (SHINE). To meet the high precision synchronization requirements for both facilities, an optical-based timing distribution system is absolutely necessary. Such a system distributes the laser pulse train from a locked optical master oscillator through the fiber links, which stabilized by a balance optical cross-correlator based on a periodical-poled KTiOPO4 crystal. In this paper, the recent progress and experimental results of SXFEL and SHINE timing distribution system will be reported.
	Poster THPAB314 [0.351 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB314
About •	paper received ※ 20 May 2021 paper accepted ※ 15 July 2021 issue date ※ 22 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Photoinjector Drive Laser Temporal Shaping for Shanghai Soft X-Ray Free Electron Laser

1674

C.L. Li, X.T. Wang, W.Y. Zhang
Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China
X.L. Dai
SSRF, Shanghai, People’s Republic of China
H.X. Deng, L. Feng, B. Liu, J.G. Wang
SARI-CAS, Pudong, Shanghai, People’s Republic of China

Shanghai soft X ray free electron laser (SXFEL) initial designed shape of the photocathode driver laser is flattop produced by α-BBO stacking. The advantage of this design is attractive in producing electron bunch with low initial emittance and high uniformity along the electron bunch. However, some unavoidable modulations are generated along the laser pulse which trigger the electron bunch modulation generated at the source, which is due to the fast response time (tens of femtosecond) of copper cathode. In order to eliminate the modulation of electron bunch, temporal Gaussian driver laser was designed and tested, measurement results show the electron bunch longitudinal modulation was removed. In this paper, we present two kinds of driver laser pulse temporal shaping methods based on α-BBO stacking and UV grating pair shaping. Moreover, corresponding electron bunch temporal profile are also presented.

Poster TUPAB121 [2.469 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB121

About •

paper received ※ 19 May 2021 paper accepted ※ 02 June 2021 issue date ※ 25 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB285

High Resolution Arrival Time Measurement of the Seed Laser

3320

J.G. Wang, H.X. Deng, L. Feng, C.L. Li, B. Liu
SARI-CAS, Pudong, Shanghai, People’s Republic of China
X.T. Wang, W.Y. Zhang
Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China

The Shanghai soft X-ray Free-Electron Laser facility (SXFEL) is a fourth-generation linac-based light source, capable of producing X-ray pulses with a duration of tens of femtosecond. The seed laser for external seeding FEL, therefore, has tight requirements for relative arrival time to the electron bunch. To reach the required energy and wavelength for external seeding FEL, further optical amplification and frequency conversion is needed. These include reflection and propagation in different material and in air, in addition, also include the long laser transport beamline to the undulator, make the laser pulses arrival time influenced by environmental variation. To reach the required specification, high-resolution measurement of the laser arrival time is necessary. In this paper, we present a general concept for the measurement of the laser arrival time.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB285

About •

paper received ※ 19 May 2021 paper accepted ※ 12 July 2021 issue date ※ 12 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPAB286

Design of the Laser-to-RF Synchronization at 1.3 GHz for SHINE

3323

J.G. Wang, H.X. Deng, L. Feng, C.L. Li, B. Liu
SARI-CAS, Pudong, Shanghai, People’s Republic of China
X.T. Wang, W.Y. Zhang
Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China

A next-generation photo-science facility like Shanghai HIgh repetition rate XFEL aNd Extreme light facility (SHINE) is aiming to generate femtosecond X-ray pulses with unprecedented brightness to film chemical and physical reactions with sub-atomic level spatio-temporal resolution. To fulfill this scientific goal, high-precision timing synchronization is essential. The pulsed optical synchronization has become an indispensable scheme for femtosecond precision synchronization of X-ray free-electron lasers. One of the critical tasks of pulsed optical synchronization is to synchronize various microwave sources. For the future SHINE, ultralow-noise pulses generated by a mode-locked laser are distributed over large distances via stabilized fiber links to all critical facility end-stations. In order to achieve low timing jitter and long-term stability of 1.3 GHz RF reference signal for the accuracy Low-Level RF(RF) field control, an Electro-optical intensity Modulator (EOM) based scheme is being developed at SHINE. In this paper, we present the progress on the design of the optical part and the integrated electronics of the laser-to-RF synchronization.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB286

About •

paper received ※ 20 May 2021 paper accepted ※ 12 July 2021 issue date ※ 28 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB313

Drive Laser System for Shanghai Soft X-Ray Free Electron Laser

4403

L. Feng, C.L. Li, B. Liu, J.G. Wang
SARI-CAS, Pudong, Shanghai, People’s Republic of China
X. Lu
ANL, Lemont, Illinois, USA
X.T. Wang, W.Y. Zhang
Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China

In this paper, we introduce the design and layout of the drive laser of Shanghai Soft X-ray Free Electron Laser (SXFEL). It is known that the temporal and spatial distribution of the drive laser is crucial for high-quality electron beams. The drive laser provides the laser pulse of 266nm wavelength and 8ps pulse duration for the photocathode, as well as 400nm wavelength, 2-20ps tunable pulse duration for the laser heater. For this purpose, there are mainly four parts in such system, including a third-harmonic generation device, pulse stretcher, image transmitted system, and laser optical module for laser heater. Finally, the measured results of the electron beam under this drive laser system are presented and discussed.

Poster THPAB313 [0.691 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB313

About •

paper received ※ 20 May 2021 paper accepted ※ 15 July 2021 issue date ※ 24 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPAB314

Development of the Femtosecond Timing Distribution System for the Shanghai Soft X-Ray Free Electron Laser

4406

L. Feng, C.L. Li, B. Liu, J.G. Wang
SARI-CAS, Pudong, Shanghai, People’s Republic of China
X.T. Wang, W.Y. Zhang
Shanghai Advanced Research Institute, Pudong, Shanghai, People’s Republic of China

High accuracy timing and synchronization system on femtosecond timescale play an important role for free-electron laser projects such as Shanghai Soft X-ray free-electron laser facility (SXFEL), and future Shanghai high repetition rate XFEL and Extreme light facility (SHINE). To meet the high precision synchronization requirements for both facilities, an optical-based timing distribution system is absolutely necessary. Such a system distributes the laser pulse train from a locked optical master oscillator through the fiber links, which stabilized by a balance optical cross-correlator based on a periodical-poled KTiOPO4 crystal. In this paper, the recent progress and experimental results of SXFEL and SHINE timing distribution system will be reported.

Poster THPAB314 [0.351 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB314

About •

paper received ※ 20 May 2021 paper accepted ※ 15 July 2021 issue date ※ 22 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)