MOXB03
SLAC, Menlo Park, California, USA
We will present an overview of recent advances in high gradient copper structures operating at room temperature and at cryogenic temperature. We will include the advances that enabled us to understand better the underlying fundamental physics that govern the breakdown phenomena in high field vacuum structures. We will then present the recent advances in linac topologies that take advantage of this basic understanding of the breakdown phenomena. We will also showcase how these advances are being utilized for many different medical, industrial, and discovery machines. Our presentation will not be limited to electron accelerators but will also include advances for high gradient hadron linacs.
LANL, Los Alamos, New Mexico, USA
SLAC, Menlo Park, California, USA
ANL, Lemont, Illinois, USA
This poster will report the results of high gradient testing of the two proton β=0.5 C-band accelerating cavities. The cavities for proton acceleration were fabricated at SLAC and tested at high gradient C-band accelerator test stand at LANL. One cavity was made of copper, and the second was made of a copper-silver alloy. LANL test stand was constructed around a 50 MW, 5.712 GHz Canon klystron and is capable to provide power for conditioning single cell accelerating cavities for operation at surface electric fields up to 300 MV/m. These β=0.5 C-band cavities were the first two cavities tested on LANL C-band test stand. The presentation will report achieved gradients, breakdown probabilities, and other characteristics measured during the high power operation.
SLAC, Menlo Park, California, USA
Fermilab, Batavia, Illinois, USA
We have developed a THz-driven field emission electron gun and beam characterization assembly. The two cell standing-wave gun operates in the pi mode at 110.08 GHz. It is designed to produce 360 keV electrons with 500 kW of input power supplied by a 110 GHz gyrotron. Multiple gun structures were electroformed in copper using a high precision diamond-turned mandrel. The field emission cathode is a rounded copper tip located in the first cell. The cavity resonances were mechanically tuned using azimuthal compression. This work will discuss details of the fabrication and tuning and present the results of low power measurements.
Sapienza University of Rome, Rome, Italy
RadiaBeam, Santa Monica, California, USA
INFN/LNF, Frascati, Italy
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
In this paper, we present a new class of a hybrid photoinjector in C-Band. This project is the effort result of a UCLA/Sapienza/INFN-LNF/SLAC/RadiaBeam collaboration. This device is an integrated structure consisting of an initial standing-wave 2.5-cell gun connected to a traveling-wave section at the input coupler. Such a scheme nearly avoids power reflection back to the klystron, removing the need for a high-power circulator. It also introduces strong velocity bunching due to a 90° phase shift in the accelerating field. A relatively high cathode electric field of 120 MV/m produces a ~4 MeV beam with ~20 MW input RF power in a small foot-print. The beam transverse dynamics are controlled with a ~0.27 T focusing solenoid. We show the simulation results of the RF/magnetic design and the optimized beam dynamics that shows 6D phase space compensation at 250 pC. Proper beam shaping at the cathode yields a ~0.5 mm-mrad transverse emittance. A beam waist occurs simultaneously with a longitudinal focus of <400 fs rms and peak current >600 A. We discuss application of this injector to an Inverse-Compton Scattering system and present corresponding start-to-end beam dynamics simulations.
UCLA, Los Angeles, California, USA
SLAC, Menlo Park, California, USA
PBPL, Los Angeles, USA
The University of Liverpool, Liverpool, United Kingdom
UCLA has recently constructed SAMURAI, a new radiation bunker and laser infrastructure for advanced accelerator research. In its first phase, we will build a 30 MeV photoinjector with an S-band hybrid gun. The beam dynamics simulation for this beamline showed the generation of the beam with the emittance 2.4 um and the peak current 270 A. FIR-FEL experiments are planned in this beamline. The saturation peak power was expected at 170 MW.
SLAC, Menlo Park, California, USA
Microcrystal electron diffraction (MicroED) is a technique used by scientists to image molecular crystals with cryo-electron microscopy (cryo-EM)*. However, cryo-EMs remain expensive, limiting MicroED’s accessibility. Current cryo-EMs accelerate electrons to 200-300 keV using DC electron guns with a nA of current and low emittance. However at higher voltages these DC guns rapidly grow in size. Replacing these electron guns with a compact linac powered by solid-state sources could lower cost while maintaining beam quality, thereby increasing accessibility. Utilizing compact high shunt impedance X-band structures ensures that each RF cycle contains at most a few electrons, preserving beam coherence. CW operation of the RF linac is possible with distributed solid-state architectures** that use 100W solid-state amplifiers at X-band frequencies. We present an initial design for a prototype low-cost CW RF linac for high-throughput MicroED producing 200 keV electrons with a standing-wave architecture where each cell is individually powered by a solid-state amplifier. This design also provides an upgrade path for future compact MeV-scale sources on the order of 1 meter in size.
* Jones, C. G. et al. ACS central science 4, 1587-1592 (2018).
** D. C. Nguyen et al, Proc. 9th International Particle Accelerator Conference (IPAC’18), no. 9, pp. 520-523
SLAC, Menlo Park, California, USA
Michigan State University, East Lansing, Michigan, USA
Planar polycrystalline synthetic diamond with nitrogen-doping/incorporation was found to be a remarkable field emitter. It is capable of generating a high charge beam and handling moderate vacuum conditions. Integrating it with an efficient RF cavity could therefore provide a compact electron source for RF injectors. Understanding the performance metrics of the emitter in RF fields is essential toward developing such a device. We investigated a test setup of the field emitter at the X-band frequency. The setup included an X-band cavity operating at the TM02 mode. The field emitter material will be plated on the tip of a insertion rod on the cavity back plate. Part of the back plate and the emitter rod are demountable, allowing for exchange of the field emitters. The TM02 mode was chosen such that the design of the demountable back plate does not induce field enhancement at the installation gap. The cavity were optimized to achieve a high surface field at the emitter tip and a maximum energy gain of the emitted electrons at a given input power. We will present the RF and mechanical design of such a TM02 X-band cavity for field emitter testing.
SLAC, Menlo Park, California, USA
Pencil beam scanning of charged particle beams is a key technology enabling high dose rate cancer therapy. The potential benefits of high-speed dose delivery include not only a reduction in total treatment time and improvements to motion management during treatment but also the possibility of enhanced healthy tissue sparing through the FLASH effect, a promising new treatment modality. We present here the design of an RF deflector operating at 2.856 GHz for the rapid steering of 150 MeV proton beams. The design utilizes a TE11-like mode supported by two posts protruding into a pillbox geometry to form an RF dipole. This configuration provides a significant enhancement to the efficiency of the structure, characterized by a transverse shunt impedance of 68 MOhm/m, as compared to a conventional TM11 deflector. We discuss simulations of the structure performance for several operating configurations including the addition of a permanent magnet quadrupole to amplify the RF-driven deflection. In addition to simulation studies, we will present preliminary results from a 3-cell prototype fabricated using four copper slabs to accommodate the non-axially symmetric cell geometry.