IPAC2021 - List of Authors (Sandeep Kumar, R.)

Paper	Title	Page
TUPAB405	Design of High Energy Linac for Generation of Isotopes for Medical Applications	2472
	A.P. Deshpande, S.R. Bhat, T.S. Dixit, P.S. Jadhav, A.S. Kottawar, R. Krishnan, M.S. Kumbhare, J. Mishra, C.S. Nainwad, S.R. Name, R. Sandeep Kumar, A. Shaikh, K.A. Thakur, M.M. Vidwans, A. Waingankar SAMEER, Mumbai, India A.K. Mishra INMAS, New Delhi, India N. Upadhyay University of Mumbai, Mumbai, India
	Funding: Ministry of Electronics and Information Technology (MeitY), Govt. of India. After successful implementation of 6 and 15 MeV electron linear accelerator (linac) technology for Cancer Therapy in India, we initiated the development of high energy high current accelerator for the production of radioisotopes for diagnostic applications. The accelerator will be of 30 MeV energy with 350 µA average current provided by a gridded gun. The linac is a side coupled standing wave accelerator operating at 2998 MHz frequency operating at p/2 mode. The choice of p/2 operating mode is particularly suitable for this case where the repetition rate will be around 400 Hz. Klystron with 7 MW peak power and 36 kW average power will be used as the RF source. The modulator will be a solid-state modulator. The control system is FPGA based setup developed in-house at SAMEER. A retractable target with tungsten will be used as a converter to generate X-rays via bremsstrahlung. The x-rays will then interact with enriched 100Mo target to produce 99Mo via (g, n) reaction. Eluted 99mTc will be used for diagnostic applications. The paper lists the challenges and novel schemes developed at SAMEER to make a compact, rugged, and easy to use system keeping in mind local conditions.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB405
About •	paper received ※ 19 May 2021 paper accepted ※ 23 June 2021 issue date ※ 02 September 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design of High Energy Linac for Generation of Isotopes for Medical Applications

2472

A.P. Deshpande, S.R. Bhat, T.S. Dixit, P.S. Jadhav, A.S. Kottawar, R. Krishnan, M.S. Kumbhare, J. Mishra, C.S. Nainwad, S.R. Name, R. Sandeep Kumar, A. Shaikh, K.A. Thakur, M.M. Vidwans, A. Waingankar
SAMEER, Mumbai, India
A.K. Mishra
INMAS, New Delhi, India
N. Upadhyay
University of Mumbai, Mumbai, India

Funding: Ministry of Electronics and Information Technology (MeitY), Govt. of India.
After successful implementation of 6 and 15 MeV electron linear accelerator (linac) technology for Cancer Therapy in India, we initiated the development of high energy high current accelerator for the production of radioisotopes for diagnostic applications. The accelerator will be of 30 MeV energy with 350 µA average current provided by a gridded gun. The linac is a side coupled standing wave accelerator operating at 2998 MHz frequency operating at p/2 mode. The choice of p/2 operating mode is particularly suitable for this case where the repetition rate will be around 400 Hz. Klystron with 7 MW peak power and 36 kW average power will be used as the RF source. The modulator will be a solid-state modulator. The control system is FPGA based setup developed in-house at SAMEER. A retractable target with tungsten will be used as a converter to generate X-rays via bremsstrahlung. The x-rays will then interact with enriched 100Mo target to produce 99Mo via (g, n) reaction. Eluted 99mTc will be used for diagnostic applications. The paper lists the challenges and novel schemes developed at SAMEER to make a compact, rugged, and easy to use system keeping in mind local conditions.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB405

About •

paper received ※ 19 May 2021 paper accepted ※ 23 June 2021 issue date ※ 02 September 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)