IPAC2021 - List of Authors (Massana, V.)

Paper	Title	Page
MOPAB084	Acceptance Tests and Installation of the IVU and Front End for the XAIRA Beamline of ALBA	318
	J. Campmany, J. Marcos, V. Massana ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
	XAIRA is a new beamline being built at ALBA synchrotron for macromolecular crystallography (MX) devoted to the study of small bio crystals. It aims at providing a full beam with a size of 3x1 µm² FWHM (hxv) and flux of >3·10¹² ph/s (250 mA in Storage Ring) at 1 Å wavelength (12.4 keV) to tackle MX projects for which only tiny (<10 μm) or imperfect crystals are obtained. Besides, XAIRA aims at providing photons at low energies, down to 4 keV, to support MX experiments exploiting the anomalous signal of the metals naturally occurring in proteins (native phasing), which is enhanced in the case of small crystals and long wavelengths. To this end, an in-vacuum undulator has been built by a consortium between Kyma and Research Instruments companies. In this paper, we present the results of the Site Acceptance Tests made at ALBA using a new bench developed to measure closed structures, and also the steps done for its installation in the ALBA tunnel.
	Poster MOPAB084 [1.715 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB084
About •	paper received ※ 11 May 2021 paper accepted ※ 20 May 2021 issue date ※ 25 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB085	Design and Fabrication of a Short Multipole Wiggler and the Front End for the New ALBA Beamline FAXTOR	321
	J. Campmany, J. Marcos, V. Massana ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
	FAXTOR is a new hard XR tomography beam line that is being built at ALBA in order to fulfil the needs that cannot be currently covered by the MISTRAL VUV and soft XR beamline. This beam line needs a small source size as well higher than 10¹² Photons per second through an aperture of 4x1 mm2 in the whole range 5 to 60 keV, for a current of 250 mA in Storage Ring with source size maintained below 310 µm horizontal and 25 µm vertical. The contract was awarded to AVS-US Company. In this paper we present the design finally selected as well as the preliminary design carried out by manufacturer to implement the conceptual model designed by ALBA.
	Poster MOPAB085 [1.879 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB085
About •	paper received ※ 11 May 2021 paper accepted ※ 20 May 2021 issue date ※ 31 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Acceptance Tests and Installation of the IVU and Front End for the XAIRA Beamline of ALBA

318

J. Campmany, J. Marcos, V. Massana
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain

XAIRA is a new beamline being built at ALBA synchrotron for macromolecular crystallography (MX) devoted to the study of small bio crystals. It aims at providing a full beam with a size of 3x1 µm² FWHM (hxv) and flux of >3·10¹² ph/s (250 mA in Storage Ring) at 1 Å wavelength (12.4 keV) to tackle MX projects for which only tiny (<10 μm) or imperfect crystals are obtained. Besides, XAIRA aims at providing photons at low energies, down to 4 keV, to support MX experiments exploiting the anomalous signal of the metals naturally occurring in proteins (native phasing), which is enhanced in the case of small crystals and long wavelengths. To this end, an in-vacuum undulator has been built by a consortium between Kyma and Research Instruments companies. In this paper, we present the results of the Site Acceptance Tests made at ALBA using a new bench developed to measure closed structures, and also the steps done for its installation in the ALBA tunnel.

Poster MOPAB084 [1.715 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB084

About •

paper received ※ 11 May 2021 paper accepted ※ 20 May 2021 issue date ※ 25 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB085

Design and Fabrication of a Short Multipole Wiggler and the Front End for the New ALBA Beamline FAXTOR

321

J. Campmany, J. Marcos, V. Massana
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain

FAXTOR is a new hard XR tomography beam line that is being built at ALBA in order to fulfil the needs that cannot be currently covered by the MISTRAL VUV and soft XR beamline. This beam line needs a small source size as well higher than 10¹² Photons per second through an aperture of 4x1 mm2 in the whole range 5 to 60 keV, for a current of 250 mA in Storage Ring with source size maintained below 310 µm horizontal and 25 µm vertical. The contract was awarded to AVS-US Company. In this paper we present the design finally selected as well as the preliminary design carried out by manufacturer to implement the conceptual model designed by ALBA.

Poster MOPAB085 [1.879 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB085

About •

paper received ※ 11 May 2021 paper accepted ※ 20 May 2021 issue date ※ 31 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)