Author: Marcos, J.
Paper Title Page
MOPAB084 Acceptance Tests and Installation of the IVU and Front End for the XAIRA Beamline of ALBA 318
 
  • J. Campmany, J. Marcos, V. Massana
    ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
  
  XAIRA is a new beamline being built at ALBA synchrotron for macromolecular crystallography (MX) devoted to the study of small bio crystals. It aims at providing a full beam with a size of 3x1 µm2 FWHM (hxv) and flux of >3·1012 ph/s (250 mA in Storage Ring) at 1 Å wavelength (12.4 keV) to tackle MX projects for which only tiny (<10 μm) or imperfect crystals are obtained. Besides, XAIRA aims at providing photons at low energies, down to 4 keV, to support MX experiments exploiting the anomalous signal of the metals naturally occurring in proteins (native phasing), which is enhanced in the case of small crystals and long wavelengths. To this end, an in-vacuum undulator has been built by a consortium between Kyma and Research Instruments companies. In this paper, we present the results of the Site Acceptance Tests made at ALBA using a new bench developed to measure closed structures, and also the steps done for its installation in the ALBA tunnel.  
poster icon Poster MOPAB084 [1.715 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB084  
About • paper received ※ 11 May 2021       paper accepted ※ 20 May 2021       issue date ※ 25 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPAB085 Design and Fabrication of a Short Multipole Wiggler and the Front End for the New ALBA Beamline FAXTOR 321
 
  • J. Campmany, J. Marcos, V. Massana
    ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
  
  FAXTOR is a new hard XR tomography beam line that is being built at ALBA in order to fulfil the needs that cannot be currently covered by the MISTRAL VUV and soft XR beamline. This beam line needs a small source size as well higher than 1012 Photons per second through an aperture of 4x1 mm2 in the whole range 5 to 60 keV, for a current of 250 mA in Storage Ring with source size maintained below 310 µm horizontal and 25 µm vertical. The contract was awarded to AVS-US Company. In this paper we present the design finally selected as well as the preliminary design carried out by manufacturer to implement the conceptual model designed by ALBA.  
poster icon Poster MOPAB085 [1.879 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB085  
About • paper received ※ 11 May 2021       paper accepted ※ 20 May 2021       issue date ※ 31 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPAB086 Design of Front End and a 3-Pole-Wiggler as a Photon Source for BEATS Beamline at SESAME 324
 
  • J. Campmany, J. Marcos
    ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
  • M. Al Nadjawi, M. Attal, G. Lori
    SESAME, Allan, Jordan
  • I. Cudin
    Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
  • S. Guiducci
    INFN/LNF, Frascati, Italy
  • P. Van Vaerenbergh
    ESRF, Grenoble, France
  
  BEATS is an international collaboration funded by EU in order to design and implement an XR tomography beam line in SESAME Jordanian synchrotron. ALBA contribution consists in the design of the photon source and the Front End elements. In this paper we present the conceptual designs of both the 3-pole wiggler uses as photon source as well as the Front End elements designed for the beamline.  
poster icon Poster MOPAB086 [2.306 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB086  
About • paper received ※ 11 May 2021       paper accepted ※ 21 May 2021       issue date ※ 17 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)