IPAC2021 - List of Authors (Madec, C.)

Paper	Title	Page
WEXB01	The ESS Elliptical Cavity Cryomodules Production at CEA	2536
	C. Madec CEA, Gif-sur-Yvette, France C. Arcambal, S. Berry, A. Bouygues, G. Devanz, C. Mayri, P. Sahuquet, T. Trublet CEA-DRF-IRFU, France P. Bosland, E. Cenni, C. Cloué, T. Hamelin, O. Piquet CEA-IRFU, Gif-sur-Yvette, France P. Pierini ESS, Lund, Sweden
	CEA in Kind contribution to the ESS superconducting LINAC includes 30 elliptical medium and high-beta cryomodules. CEA is in charge of the production of all the components (except the cavities delivered by LASA and STFC) as well as the assembly of the cryomodules and a few cryogenic and RF tests. The power couplers operating at a maximum power of 1.1MW on a 3.6ms pulse at 14Hz are conditioned at high RF power on a dedicated stand. The assembly of the cryomodules is performed at CEA by a private Company under the supervision of CEA. This paper presents the status of the cryomodules production and the infrastructure dedicated to this project at CEA Saclay.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEXB01
About •	paper received ※ 18 May 2021 paper accepted ※ 19 July 2021 issue date ※ 30 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB388	Status of the High Power Couplers for ESS Elliptical Cavities	1186
	C. Arcambal, P. Bosland, G. Devanz, T. Hamelin, C. Madec, C. Marchand, M. Oublaid, G. Perreu, C. Servouin, C. Simon CEA-IRFU, Gif-sur-Yvette, France M. Baudrier, C. Mayri, S. Regnaud, T.V. Vacher CEA-DRF-IRFU, France
	In the framework of the European Spallation Source (ESS), CEA Paris-Saclay is responsible for the delivery of 30 cryomodules (9 medium beta (β = 0.67) and 21 high beta (β = 0.86) ones). Each cryomodule contains 4 elliptical cavities equipped with a radio frequency power coupler. The ESS nominal pulse is 1.1 MW maximum peak power over a width of 3.6 ms at a repetition rate of 14 Hz. The design of the couplers for medium beta and for high beta cavities is the same, except a small difference of the antenna penetration to adjust the Q_ext. The mass production of the 120 couplers started and all the medium beta couplers have been conditioned at room temperature. The first cryomodules equipped with the power couplers were successfully tested at high RF power and with cavities at 2K reaching the ESS nominal pulse. The main issue at the start of the series production could be fixed and it was due to bad TiN coatings that caused abnormal dielectric losses in the window. Thus, this paper deals with the TiN coating defect, presents the conditioning procedure and gives a conditioning report of these 36 couplers.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB388
About •	paper received ※ 19 May 2021 paper accepted ※ 24 May 2021 issue date ※ 18 August 2021
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The ESS Elliptical Cavity Cryomodules Production at CEA

2536

C. Madec
CEA, Gif-sur-Yvette, France
C. Arcambal, S. Berry, A. Bouygues, G. Devanz, C. Mayri, P. Sahuquet, T. Trublet
CEA-DRF-IRFU, France
P. Bosland, E. Cenni, C. Cloué, T. Hamelin, O. Piquet
CEA-IRFU, Gif-sur-Yvette, France
P. Pierini
ESS, Lund, Sweden

CEA in Kind contribution to the ESS superconducting LINAC includes 30 elliptical medium and high-beta cryomodules. CEA is in charge of the production of all the components (except the cavities delivered by LASA and STFC) as well as the assembly of the cryomodules and a few cryogenic and RF tests. The power couplers operating at a maximum power of 1.1MW on a 3.6ms pulse at 14Hz are conditioned at high RF power on a dedicated stand. The assembly of the cryomodules is performed at CEA by a private Company under the supervision of CEA. This paper presents the status of the cryomodules production and the infrastructure dedicated to this project at CEA Saclay.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEXB01

About •

paper received ※ 18 May 2021 paper accepted ※ 19 July 2021 issue date ※ 30 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPAB388

Status of the High Power Couplers for ESS Elliptical Cavities

1186

C. Arcambal, P. Bosland, G. Devanz, T. Hamelin, C. Madec, C. Marchand, M. Oublaid, G. Perreu, C. Servouin, C. Simon
CEA-IRFU, Gif-sur-Yvette, France
M. Baudrier, C. Mayri, S. Regnaud, T.V. Vacher
CEA-DRF-IRFU, France

In the framework of the European Spallation Source (ESS), CEA Paris-Saclay is responsible for the delivery of 30 cryomodules (9 medium beta (β = 0.67) and 21 high beta (β = 0.86) ones). Each cryomodule contains 4 elliptical cavities equipped with a radio frequency power coupler. The ESS nominal pulse is 1.1 MW maximum peak power over a width of 3.6 ms at a repetition rate of 14 Hz. The design of the couplers for medium beta and for high beta cavities is the same, except a small difference of the antenna penetration to adjust the Q_ext. The mass production of the 120 couplers started and all the medium beta couplers have been conditioned at room temperature. The first cryomodules equipped with the power couplers were successfully tested at high RF power and with cavities at 2K reaching the ESS nominal pulse. The main issue at the start of the series production could be fixed and it was due to bad TiN coatings that caused abnormal dielectric losses in the window. Thus, this paper deals with the TiN coating defect, presents the conditioning procedure and gives a conditioning report of these 36 couplers.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB388

About •

paper received ※ 19 May 2021 paper accepted ※ 24 May 2021 issue date ※ 18 August 2021

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)