Author: Liu, Y.Q.
Paper Title Page
TUPAB370 Development of Long Coil Dynamic Magnetic Field Measurement System for Dipole Magnets of HEPS Booster 2384
 
  • Y.Q. Liu, C.D. Deng, W. Kang, L. Li, S. Li, X. Wu, Y.W. Wu, J.X. Zhou
    IHEP, Beijing, People’s Republic of China
  • C.D. Deng, Y.W. Wu
    DNSC, Dongguan, People’s Republic of China
 
  A magnetic field measurement system for dipole magnets of High Energy Photon Source Booster is designed and developed. The system uses the long coil upflow method to measure the dynamic integral field of the magnet, and the long coil transverse-translation method to measure the integral field distribution error of the magnet. In this paper, the design and implementation of the magnetic measuring system are introduced in detail, and the magnetic field measurement results of the prototype magnet are shown. The measurement results show that the repeatability of the dynamic integral field measurement system is about 2 in 10,000, and the repeatability of the uniform distribution of the integral field is better than 1 in 10,000, which meets the test requirements of the discrete integral field of bulk magnets ±1 parts per thousand and the uniformity of the integral field ±5×10-4@6GeV and ±1×10-3 @0.5GeV.  
poster icon Poster TUPAB370 [1.475 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB370  
About • paper received ※ 16 May 2021       paper accepted ※ 16 June 2021       issue date ※ 17 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAB289 Design and Manufacture of Solenoid Center Deviation Measurement Device 4366
 
  • X. Wu, C.D. Deng, W. Kang, L. Li, S. Li, Y.Q. Liu, Y.W. Wu, J.X. Zhou
    IHEP, Beijing, People’s Republic of China
 
  The solenoids are widely used both in conventional magnets and superconducting magnets in particle accelerators. The longitudinal fields along the longitudinal direction of the solenoids are usually measured with the Hall probe measurement system. However, in some cases, the deviation between the magnetic center and mechanical center of the solenoid is another important parameter and has to be measured accurately. In this paper, a device is designed and developed to measure the center deviation of the solenoid, which can be both used in conventional magnets and superconducting magnets. After the device is finished, some tests are made in the solenoid to check whether the data is correct. For the numerical simulation and analysis of the magnetic field inside the solenoid, the TOSCA code was chosen right from start. The results of the analysis are compared to the result of the tests.  
poster icon Poster THPAB289 [1.001 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB289  
About • paper received ※ 14 May 2021       paper accepted ※ 27 July 2021       issue date ※ 22 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPAB295 Application of CMM Technology in Accelerator Magnet Detection 4381
 
  • S. Li, F.S. Chen, C.D. Deng, W. Kang, Y.Q. Liu, X. Wu, Y.W. Wu
    IHEP, Beijing, People’s Republic of China
 
  Accelerator magnet is one of the most difficult equipment in accelerator hardware system. With the improvement of physical requirements, more and more high technical requirements are put forward for magnets. This paper mainly introduces the new application of three coordinate measurement technology in the detection of accelerator magnet, and introduces the working process of CMM in the detection of accelerator magnet polar profile.  
poster icon Poster THPAB295 [0.677 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB295  
About • paper received ※ 14 May 2021       paper accepted ※ 02 September 2021       issue date ※ 29 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPAB362 Physical Design of Electrostatic Deflector in CSNS Muon Source 2360
 
  • Y.W. Wu, S. Li, J.Y. Tang, X. Wu
    IHEP, Beijing, People’s Republic of China
  • C.D. Deng, Y. Hong
    DNSC, Dongguan, People’s Republic of China
  • Y.Q. Liu
    IHEP CSNS, Guangdong Province, People’s Republic of China
 
  CSNS will build a muon source at the end of the RTBT. In the current design, the muon source propose two schemes, namely the baseline scheme and the baby scheme. High voltage electrostatic deflectors (ESD) are used to deflect the beam in the two schemes. A three-channel ESD with 400 kV HV is employed in the baseline scheme and a 210 kV dual-channel ESD in the simplified scheme. According to physical requirements, the electric field concentration factor is introduced, and the electrode of ESD is theoretically designed. 2D and 3D simulations are carried out to analyze the characteristics of electric field distribution by OPERA. The geometry of the electrodes also met the requirements of electric field uniformity, high voltage resistance and mechanical strength at the same time. In the baseline scheme and the baby scheme, the ESD electric field concentration factors are 1.36 and 1.53, and the maximum electric field is 6.78MV/m and 4.6MV/m, respectively. The design meets the requirements and is reasonably feasible.  
poster icon Poster TUPAB362 [2.214 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUPAB362  
About • paper received ※ 13 May 2021       paper accepted ※ 09 June 2021       issue date ※ 22 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)