Author: Koser, D.
Paper Title Page
THPAB167 Technical Design of an RFQ Injector for the IsoDAR Cyclotron 4075
 
  • H. Höltermann, D. Koser, B. Koubek, H. Podlech, U. Ratzinger, M. Schuett, M. Syha
    BEVATECH, Frankfurt, Germany
  • J.M. Conrad, J. Smolsky, L.H. Waites, D. Winklehner
    MIT, Cambridge, Massachusetts, USA
 
  For the IsoDAR (Isotope Decay-At-Rest) experiment, a high intensity (10 mA CW) primary proton beam is needed. To generate this beam, H2+ is accelerated in a cyclotron and stripped into protons after extraction. An RFQ, partially embedded in the cyclotron yoke, will be used to bunch and axially inject H2+ ions into the main accelerator. The strong RFQ bunching capabilities will be used to optimize the overall injection efficiency. To keep the setup compact the distance between the ion source and RFQ can be kept very short as well. In this paper, we describe the technical design of the RFQ. We focus on two critical aspects: 1. The use of a split-coaxial structure, necessitated by the low frequency of 32.8 MHz (matching the cyclotron RF) and the desired small tank diameter; 2. The high current, CW operation, requiring a good cooling concept for the RFQ tank and vanes.  
poster icon Poster THPAB167 [2.162 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-THPAB167  
About • paper received ※ 14 May 2021       paper accepted ※ 27 July 2021       issue date ※ 21 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPAB160 Tools for the Development and Applications of the IsoDAR Cyclotron 550
 
  • L.H. Waites, J.R. Alonso, J.M. Conrad, D. Koser, D. Winklehner
    MIT, Cambridge, Massachusetts, USA
 
  Funding: NSF provided funding for the RFQDIP project, Draper laboratory provided a fellowship for the graduate student
The IsoDAR cyclotron is a 60 MeV cyclotron designed to output 10mA of protons in order to be a driver for a neutrino experiment. However, this high power can be used in other useful and important applications outside of particle physics. The IsoDAR cyclotron accelerates H2+, which allows the beam to be highly versatile and important for the development of high-power targets. This could help alleviate a huge bottleneck in the medical isotope community. IsoDAR could also be used for the development of materials. The accelerator system uses many new tools, including novel methods of applying machine learning, as well as several of the uses of this new technology. With these applications and tools, the IsoDAR cyclotron can have an important impact on the accelerator, medical, and physics communities.
 
poster icon Poster MOPAB160 [0.424 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-MOPAB160  
About • paper received ※ 15 May 2021       paper accepted ※ 24 June 2021       issue date ※ 13 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUXB07 High-Current H2+ Beams from a Compact Cyclotron using RFQ Direct Injection 1301
 
  • D. Winklehner, J.M. Conrad, D. Koser, J. Smolsky, L.H. Waites
    MIT, Cambridge, Massachusetts, USA
 
  Funding: This work was supported by NSF grants PHY-1505858 and PHY-1626069.
For the IsoDAR neutrino experiment, we have developed a compact and cost-effective cyclotron-based driver to produce high current beams (cw proton beam currents of >10 mA at 60 MeV). This is a factor of 4 higher than the current state-of-the-art for cyclotrons and a factor of 10 compared to what is commercially available. All areas of physics that call for high cw currents can greatly benefit from this result; e.g. particle physics, medical isotope production, and energy research. This increase in beam current is possible in part because the cyclotron is designed to include and use vortex-motion, allowing clean extraction. Such a design process is only possible with the help of high-fidelity codes, like OPAL. Another novelty is the use of an RFQ embedded in the cyclotron yoke to bunch the beam during axial injection. Finally, using H2+ relieves some of the space charge constraints during injection. In this paper, we will give an overview of the project and then focus on the design and simulations of the cyclotron itself. We will describe the physics, computational tools, and simulation results. At the end, we will describe how we are including machine learning in the simulations.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-TUXB07  
About • paper received ※ 27 May 2021       paper accepted ※ 22 July 2021       issue date ※ 31 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAB202 Thermal Analysis of a Compact Split-Coaxial CW RFQ for the IsoDAR RFQ-DIP 3097
 
  • D. Koser, J.M. Conrad, D. Winklehner
    MIT, Cambridge, Massachusetts, USA
  • H. Podlech, U. Ratzinger, M. Schuett
    BEVATECH, Frankfurt, Germany
 
  The RFQ direct injection project (RFQ-DIP) for the neutrino physics experiment IsoDAR aims at an efficient injection of a high-current H2+ beam into the dedicated 60 MeV driver cyclotron. Therefore, it is intended to use a compact 32.8 MHz RFQ structure of the split-coaxial type as a pre-buncher. To determine the thermal elongation of the 1.4 m long electrode rods as well as the thermal frequency detuning of the RF structure at a maximum nominal power load of 3.6 kW, an extensive thermal and structural mechanical analysis using COMSOL Multiphysics was conducted. The water heating along the cooling channels as well as the properties of heat transfer from the copper structure to the cooling water were taken into account, which required CFD simulations of the cooling water flow in the turbulent regime. Here we present the methods and results of the sophisticated thermal and structural mechanical simulations using COMSOL and provide a comparison to more simplistic simulations conducted with CST Studio Suite.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB202  
About • paper received ※ 20 May 2021       paper accepted ※ 01 July 2021       issue date ※ 14 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPAB203 RFQ Beam Dynamics Optimization Using Machine Learning 3100
 
  • D. Koser, J.M. Conrad, L.H. Waites, D. Winklehner
    MIT, Cambridge, Massachusetts, USA
  • A. Adelmann, M. Frey, S. Mayani
    PSI, Villigen PSI, Switzerland
 
  To efficiently inject a high-current H2+ beam into the 60 MeV driver cyclotron for the proposed IsoDAR project in neutrino physics, a novel direct-injection scheme is planned to be implemented using a compact radio-frequency quadrupole (RFQ) as a pre-buncher, being partially inserted into the cyclotron yoke. To optimize the RFQ beam dynamics design, machine learning approaches were investigated for creating a surrogate model of the RFQ. The required sample datasets are generated by standard beam dynamics simulation tools like PARMTEQM and RFQGen or more sophisticated PIC simulations. By reducing the computational complexity of multi-objective optimization problems, surrogate models allow to perform sensitivity studies and an optimization of the crucial RFQ beam output parameters like transmission and emittances. The time to solution might be reduced by up to several orders of magnitude. Here we discuss different methods of surrogate model creation (polynomial chaos expansion and neural networks) and identify present limitations of surrogate model accuracy.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2021-WEPAB203  
About • paper received ※ 20 May 2021       paper accepted ※ 01 July 2021       issue date ※ 30 August 2021  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)