IPAC2019 - List of Authors (Yaramyshev, S.)

Paper	Title	Page
MOZZPLM1	Beam Commissioning of the Demonstrator Setup for the Superconducting Continuous Wave HIM/GSI-Linac	33
	M. Miski-Oglu, K. Aulenbacher, V. Gettmann, T. Kürzeder HIM, Mainz, Germany K. Aulenbacher, F.D. Dziuba IKP, Mainz, Germany W.A. Barth, C. Burandt, V. Gettmann, M. Heilmann, T. Kürzeder, A. Rubin, A. Schnase, S. Yaramyshev GSI, Darmstadt, Germany W.A. Barth, S. Yaramyshev MEPhI, Moscow, Russia M. Basten, M. Busch, T. Conrad, H. Podlech, M. Schwarz IAP, Frankfurt am Main, Germany
	During successful beam commissioning of the superconducting 15-gap Crossbar H-mode cavity at GSI Helmholtzzentrum für Schwerionenforschung heavy ions up to the design beam energy have been accelerated. The design acceleration gain of 3.5 MeV inside a length of less than 70 cm has been reached with full transmission for heavy ion beams of up to 1.5 particle mueA. The measured beam parameters confirm sufficient beam quality. The machine beam commissioning is a major milestone of the R&D for the superconducting heavy ion continuous wave linear accelerator HELIAC of Helmholtz Institute Mainz (HIM) and GSI developed in collaboration with IAP Goethe-University Frankfurt. The next step is the procurement and commissioning of so called ’Advanced Demonstrator’ - the first of series cryo module for the entire accelerator HELIAC. Results of further Demonstrator beam tests, as well as the status of the Advanced demonstrator project will be reported.
	Slides MOZZPLM1 [3.088 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOZZPLM1
About •	paper received ※ 29 April 2019 paper accepted ※ 24 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS024	Reconstruction of the Longitudinal Phase Portrait for the SC CW Heavy Ion HELIAC at GSI	898
	S. Lauber, K. Aulenbacher, W.A. Barth, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, J. List, M. Miski-Oglu HIM, Mainz, Germany K. Aulenbacher, F.D. Dziuba IKP, Mainz, Germany W.A. Barth, C. Burandt, F.D. Dziuba, P. Forck, V. Gettmann, M. Heilmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, A. Rubin, T. Sieber, S. Yaramyshev GSI, Darmstadt, Germany H. Podlech, M. Schwarz IAP, Frankfurt am Main, Germany
	At the GSI Helmholtzzentrum für Schwerionenforschung (GSI) in Darmstadt, Germany, the HElmholtz LInear ACcelerator (HELIAC) is currently under construction. The HELIAC comprises superconducting multigap Crossbar H-mode (SC CH) cavities. The input beam is delivered by an already existing High Charge Injector (HLI). For the further development of the accelerator a detailed knowledge of the input beam parameters to the SC section is necessary. A method for beam reconstruction is incorporated, which provides for longitudinal beam characteristics using measurements with a beam shape monitor and a particle simulation code. This finalizes the investigations on 6D beam parameters, following previous measurements in transversal phase space. The reconstruction of the longitudinal phase portrait is presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS024
About •	paper received ※ 24 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS034	Advanced Beam Dynamics Design for the Superconducting Heavy Ion Accelerator HELIAC	928
SUSPFO024	use link to see paper's listing under its alternate paper code
	M. Schwarz, M. Basten, M. Busch, T. Conrad, H. Podlech IAP, Frankfurt am Main, Germany K. Aulenbacher IKP, Mainz, Germany K. Aulenbacher, W.A. Barth, C. Burandt, M. Heilmann, S. Lauber, J. List, A. Rubin, S. Yaramyshev GSI, Darmstadt, Germany K. Aulenbacher, W.A. Barth, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu HIM, Mainz, Germany S. Lauber, J. List KPH, Mainz, Germany
	Funding: Work supported by BMBF contr. No. 05P18RFRB1, EU Framework Programme H₂020 662186 (MYRTE) and HIC for FAIR The standalone superconducting (SC) continuous wave (CW) heavy ion linac HELIAC (HElmholtz LInear ACcelerator) is a common project of GSI and HIM under key support of IAP Frankfurt and in collaboration with Moscow Engineering Physics Institute (MEPhI) and Moscow Institute for Theoretical and Experimental Physics (KI-ITEP). It is intended for future experiments with heavy ions near the Coulomb barrier within super-heavy element (SHE) research and aims at developing a linac with multiple CH cavities as key components downstream the High Charge State Injector (HLI) at GSI. The design is challenging due to the requirement of intense beams in CW mode up to a mass-to-charge ratio of 6, while covering a broad output energy range from 3.5 to 7.3 MeV/u with minimum energy spread. In 2017 the first superconducting section of the linac has been successfully commissioned and extensively tested with beam at GSI. In the light of experience gained in this research so far, the beam dynamics layout for the entire linac has recently been updated and optimized with particular emphasis on realistic assumptions of cavity gap and drift lengths as well as gap voltage distributions for CH3’CH11.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS034
About •	paper received ※ 30 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB014	Further RF Measurements on the Superconducting 217 MHz CH Demonstrator Cavity for a CW Linac at GSI	2826
	F.D. Dziuba, K. Aulenbacher, W.A. Barth, C. Burandt, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu HIM, Mainz, Germany K. Aulenbacher IKP, Mainz, Germany K. Aulenbacher, W.A. Barth, C. Burandt, V. Gettmann, M. Heilmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, J. Salvatore, A. Schnase, S. Yaramyshev GSI, Darmstadt, Germany M. Basten, M. Busch, T. Conrad, H. Podlech, M. Schwarz IAP, Frankfurt am Main, Germany S. Lauber, J. List KPH, Mainz, Germany
	Funding: Work supported by GSI, HIM, BMBF Contr. No. 05P18UMRB2 Recently, the first section of the superconducting (sc) continuous wave (cw) Linac has been extensively tested with heavy ion beam from the GSI High Charge State Injector (HLI). During this testing phase, the reliable operability of 217 MHz multi gap crossbar-H-mode (CH) cavities has been successfully demonstrated. The sc 217 MHz CH cavity (CH⁰) of the demonstrator setup accelerated heavy ions up to the design beam energy and even beyond at high beam intensities and full transmission. This worldwide first beam test with a sc CH cavity is a major milestone on the way realizing the entire sc cw Linac project. In this contribution further RF measurements on the cavity are presented providing full characterization of the RF structure.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB014
About •	paper received ※ 26 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB015	Cleanroom Installations for SRF Cavities at the Helmholtz-Institut Mainz	2830
	T. Kürzeder, K. Aulenbacher, W.A. Barth, C. Burandt, F.D. Dziuba, V. Gettmann, R.G. Heine, S. Lauber, J. List, M. Miski-Oglu HIM, Mainz, Germany K. Aulenbacher, F.D. Dziuba IKP, Mainz, Germany W.A. Barth, C. Burandt, V. Gettmann, M. Miski-Oglu, S. Yaramyshev GSI, Darmstadt, Germany J. Conrad TU Darmstadt, Darmstadt, Germany R.G. Heine, F. Hug, T. Stengler KPH, Mainz, Germany
	At the Helmholtz-Institut Mainz (HIM) a cleanroom has been equipped with new tools and installations for the planned treatment of different superconducting RF-cavities. At first TESLA/XFEL type 9-cell cavities for the Mainz Energy-Recovering Superconducting Accelerator (MESA) project or 217 MHz multigap Crossbar H-mode cavities for the HElmholtz LInear ACcelerator (HELIAC) under development by HIM and GSI will be treated. The cleanroom installations, including the greyroom, cover an area of about 155 sqm. In its ISO-class 6 area a large ultrasonic and a conductance rinsing bath has been installed recently. A high pressure rinsing cabinet (HPR) has been implemented between the ISO-class 6 and 4 cleanroom. A RF-cavity can be loaded and unloaded from both sides. HPR treatments are possible for cavities of up to 1.4 m length and about 0.7 m diameter. For drying the ISO-class 4 clean room is equipped with a 160 C vacuum oven. New cleanroom lifters allow the handling of up to 200 kg heavy objects. A rail system in the cleanroom floor is installed to move out the entire cold string of the cleanroom after assembly and leak testing. First operational experiences with this facility will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB015
About •	paper received ※ 29 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP005	Charge Stripping at High Energy Heavy Ion Linacs	3452
	W.A. Barth, S. Yaramyshev GSI, Darmstadt, Germany W.A. Barth HIM, Mainz, Germany W.A. Barth, T. Kulevoy, S.M. Polozov, S. Yaramyshev MEPhI, Moscow, Russia A.S. Fomichev, L.V. Grigorenko JINR, Dubna, Moscow Region, Russia T. Kulevoy NRC, Moscow, Russia
	For heavy-ion accelerator facilities charge stripping is a key Technology: the stripping charge state, its efficiency to produce ions in the required charge state, and the beam quality after stripping substantially determine the entire accelerator performance. Modern heavy ion accelerator facilities such as the future Facility for Antiproton and Ion Research (FAIR) at GSI provide for high intensity heavy ion beams beyond 200 MeV/u. Heavy ion stripping at a lower energy enables more efficient acceleration up to the final beam energy, compared to acceleration of ions with a low charge state. Due to the high power deposited by the heavy ions in the stripping media and radiation damages if a solid target is used, self-recovering stripper media must be applied. General implementation options for different stripper target media are discussed in this paper, as well as general considerations to optimize the Linac layout through the appropriate choice of stripping medium and stripping energy. The driver Linac for the Dubna Electron-Radioactive Isotope Collider fAcility (DERICA) project, recently initiated by JINR, is foreseen to provide for 100 MeV/u Uranium beam in continuous wave mode. First layout scenarios of a one-step and a two-step DERICA-stripper approach will be also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP005
About •	paper received ※ 22 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Commissioning of the Demonstrator Setup for the Superconducting Continuous Wave HIM/GSI-Linac

33

M. Miski-Oglu, K. Aulenbacher, V. Gettmann, T. Kürzeder
HIM, Mainz, Germany
K. Aulenbacher, F.D. Dziuba
IKP, Mainz, Germany
W.A. Barth, C. Burandt, V. Gettmann, M. Heilmann, T. Kürzeder, A. Rubin, A. Schnase, S. Yaramyshev
GSI, Darmstadt, Germany
W.A. Barth, S. Yaramyshev
MEPhI, Moscow, Russia
M. Basten, M. Busch, T. Conrad, H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany

During successful beam commissioning of the superconducting 15-gap Crossbar H-mode cavity at GSI Helmholtzzentrum für Schwerionenforschung heavy ions up to the design beam energy have been accelerated. The design acceleration gain of 3.5 MeV inside a length of less than 70 cm has been reached with full transmission for heavy ion beams of up to 1.5 particle mueA. The measured beam parameters confirm sufficient beam quality. The machine beam commissioning is a major milestone of the R&D for the superconducting heavy ion continuous wave linear accelerator HELIAC of Helmholtz Institute Mainz (HIM) and GSI developed in collaboration with IAP Goethe-University Frankfurt. The next step is the procurement and commissioning of so called ’Advanced Demonstrator’ - the first of series cryo module for the entire accelerator HELIAC. Results of further Demonstrator beam tests, as well as the status of the Advanced demonstrator project will be reported.

Slides MOZZPLM1 [3.088 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOZZPLM1

About •

paper received ※ 29 April 2019 paper accepted ※ 24 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS024

Reconstruction of the Longitudinal Phase Portrait for the SC CW Heavy Ion HELIAC at GSI

898

S. Lauber, K. Aulenbacher, W.A. Barth, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, J. List, M. Miski-Oglu
HIM, Mainz, Germany
K. Aulenbacher, F.D. Dziuba
IKP, Mainz, Germany
W.A. Barth, C. Burandt, F.D. Dziuba, P. Forck, V. Gettmann, M. Heilmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, A. Rubin, T. Sieber, S. Yaramyshev
GSI, Darmstadt, Germany
H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany

At the GSI Helmholtzzentrum für Schwerionenforschung (GSI) in Darmstadt, Germany, the HElmholtz LInear ACcelerator (HELIAC) is currently under construction. The HELIAC comprises superconducting multigap Crossbar H-mode (SC CH) cavities. The input beam is delivered by an already existing High Charge Injector (HLI). For the further development of the accelerator a detailed knowledge of the input beam parameters to the SC section is necessary. A method for beam reconstruction is incorporated, which provides for longitudinal beam characteristics using measurements with a beam shape monitor and a particle simulation code. This finalizes the investigations on 6D beam parameters, following previous measurements in transversal phase space. The reconstruction of the longitudinal phase portrait is presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS024

About •

paper received ※ 24 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPTS034

Advanced Beam Dynamics Design for the Superconducting Heavy Ion Accelerator HELIAC

928

SUSPFO024

use link to see paper's listing under its alternate paper code

M. Schwarz, M. Basten, M. Busch, T. Conrad, H. Podlech
IAP, Frankfurt am Main, Germany
K. Aulenbacher
IKP, Mainz, Germany
K. Aulenbacher, W.A. Barth, C. Burandt, M. Heilmann, S. Lauber, J. List, A. Rubin, S. Yaramyshev
GSI, Darmstadt, Germany
K. Aulenbacher, W.A. Barth, C. Burandt, F.D. Dziuba, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu
HIM, Mainz, Germany
S. Lauber, J. List
KPH, Mainz, Germany

Funding: Work supported by BMBF contr. No. 05P18RFRB1, EU Framework Programme H₂020 662186 (MYRTE) and HIC for FAIR
The standalone superconducting (SC) continuous wave (CW) heavy ion linac HELIAC (HElmholtz LInear ACcelerator) is a common project of GSI and HIM under key support of IAP Frankfurt and in collaboration with Moscow Engineering Physics Institute (MEPhI) and Moscow Institute for Theoretical and Experimental Physics (KI-ITEP). It is intended for future experiments with heavy ions near the Coulomb barrier within super-heavy element (SHE) research and aims at developing a linac with multiple CH cavities as key components downstream the High Charge State Injector (HLI) at GSI. The design is challenging due to the requirement of intense beams in CW mode up to a mass-to-charge ratio of 6, while covering a broad output energy range from 3.5 to 7.3 MeV/u with minimum energy spread. In 2017 the first superconducting section of the linac has been successfully commissioned and extensively tested with beam at GSI. In the light of experience gained in this research so far, the beam dynamics layout for the entire linac has recently been updated and optimized with particular emphasis on realistic assumptions of cavity gap and drift lengths as well as gap voltage distributions for CH3’CH11.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS034

About •

paper received ※ 30 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB014

Further RF Measurements on the Superconducting 217 MHz CH Demonstrator Cavity for a CW Linac at GSI

2826

F.D. Dziuba, K. Aulenbacher, W.A. Barth, C. Burandt, V. Gettmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu
HIM, Mainz, Germany
K. Aulenbacher
IKP, Mainz, Germany
K. Aulenbacher, W.A. Barth, C. Burandt, V. Gettmann, M. Heilmann, T. Kürzeder, S. Lauber, J. List, M. Miski-Oglu, J. Salvatore, A. Schnase, S. Yaramyshev
GSI, Darmstadt, Germany
M. Basten, M. Busch, T. Conrad, H. Podlech, M. Schwarz
IAP, Frankfurt am Main, Germany
S. Lauber, J. List
KPH, Mainz, Germany

Funding: Work supported by GSI, HIM, BMBF Contr. No. 05P18UMRB2
Recently, the first section of the superconducting (sc) continuous wave (cw) Linac has been extensively tested with heavy ion beam from the GSI High Charge State Injector (HLI). During this testing phase, the reliable operability of 217 MHz multi gap crossbar-H-mode (CH) cavities has been successfully demonstrated. The sc 217 MHz CH cavity (CH⁰) of the demonstrator setup accelerated heavy ions up to the design beam energy and even beyond at high beam intensities and full transmission. This worldwide first beam test with a sc CH cavity is a major milestone on the way realizing the entire sc cw Linac project. In this contribution further RF measurements on the cavity are presented providing full characterization of the RF structure.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB014

About •

paper received ※ 26 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPRB015

Cleanroom Installations for SRF Cavities at the Helmholtz-Institut Mainz

2830

T. Kürzeder, K. Aulenbacher, W.A. Barth, C. Burandt, F.D. Dziuba, V. Gettmann, R.G. Heine, S. Lauber, J. List, M. Miski-Oglu
HIM, Mainz, Germany
K. Aulenbacher, F.D. Dziuba
IKP, Mainz, Germany
W.A. Barth, C. Burandt, V. Gettmann, M. Miski-Oglu, S. Yaramyshev
GSI, Darmstadt, Germany
J. Conrad
TU Darmstadt, Darmstadt, Germany
R.G. Heine, F. Hug, T. Stengler
KPH, Mainz, Germany

At the Helmholtz-Institut Mainz (HIM) a cleanroom has been equipped with new tools and installations for the planned treatment of different superconducting RF-cavities. At first TESLA/XFEL type 9-cell cavities for the Mainz Energy-Recovering Superconducting Accelerator (MESA) project or 217 MHz multigap Crossbar H-mode cavities for the HElmholtz LInear ACcelerator (HELIAC) under development by HIM and GSI will be treated. The cleanroom installations, including the greyroom, cover an area of about 155 sqm. In its ISO-class 6 area a large ultrasonic and a conductance rinsing bath has been installed recently. A high pressure rinsing cabinet (HPR) has been implemented between the ISO-class 6 and 4 cleanroom. A RF-cavity can be loaded and unloaded from both sides. HPR treatments are possible for cavities of up to 1.4 m length and about 0.7 m diameter. For drying the ISO-class 4 clean room is equipped with a 160 C vacuum oven. New cleanroom lifters allow the handling of up to 200 kg heavy objects. A rail system in the cleanroom floor is installed to move out the entire cold string of the cleanroom after assembly and leak testing. First operational experiences with this facility will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPRB015

About •

paper received ※ 29 April 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMP005

Charge Stripping at High Energy Heavy Ion Linacs

3452

W.A. Barth, S. Yaramyshev
GSI, Darmstadt, Germany
W.A. Barth
HIM, Mainz, Germany
W.A. Barth, T. Kulevoy, S.M. Polozov, S. Yaramyshev
MEPhI, Moscow, Russia
A.S. Fomichev, L.V. Grigorenko
JINR, Dubna, Moscow Region, Russia
T. Kulevoy
NRC, Moscow, Russia

For heavy-ion accelerator facilities charge stripping is a key Technology: the stripping charge state, its efficiency to produce ions in the required charge state, and the beam quality after stripping substantially determine the entire accelerator performance. Modern heavy ion accelerator facilities such as the future Facility for Antiproton and Ion Research (FAIR) at GSI provide for high intensity heavy ion beams beyond 200 MeV/u. Heavy ion stripping at a lower energy enables more efficient acceleration up to the final beam energy, compared to acceleration of ions with a low charge state. Due to the high power deposited by the heavy ions in the stripping media and radiation damages if a solid target is used, self-recovering stripper media must be applied. General implementation options for different stripper target media are discussed in this paper, as well as general considerations to optimize the Linac layout through the appropriate choice of stripping medium and stripping energy. The driver Linac for the Dubna Electron-Radioactive Isotope Collider fAcility (DERICA) project, recently initiated by JINR, is foreseen to provide for 100 MeV/u Uranium beam in continuous wave mode. First layout scenarios of a one-step and a two-step DERICA-stripper approach will be also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPMP005

About •

paper received ※ 22 April 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)