IPAC2019 - List of Authors (Tan, Y.E.)

Paper	Title	Page
TUZZPLS2	Beam Dynamics, Injection and Impedance Studies for the Proposed Single Pulsed Nonlinear Injection Kicker at the Australian Synchrotron	1219
	R. Auchettl, R.T. Dowd, Y.E. Tan AS - ANSTO, Clayton, Australia
	The Australian Synchrotron are currently investigating the use of a single pulsed nonlinear injection kicker (NLK) to free floor space within the ring for future beamline development. The NLK has a zero and flat magnetic field at the stored beam to leave the stored beam undisturbed but has a maximum field off-axis where the injected beam is located. After the kick, the injected beam is stored. While NLKs have been prototyped at many facilities around the world, injection efficiency and heat loading have been the main impediment to deployment of the NLK. The wakefields that pass through the ceramic chamber aperture can cause severe heat loading and impedance. Despite achieving impressive injection efficiencies, a previous prototype at BESSY II * showed that strong interactions of the stored beam resulted in high heat load causing the thin 5µm Titanium coated ceramic chamber to reach temperatures > 500 °C and fail. To avoid beam induced heat loads, this paper presents studies of the wake impedance and thermal behaviour for our proposed NLK design. Injection simulations and future considerations for installation and operation at the Australian Synchrotron will be discussed. * T. Atkinson et al., "Development of a non-linear kicker system to facilitate a new injection scheme for the Bessy II storage ring", in Proc. IPAC’11, 2011, THPO024, pp. 3394-3396.
	Slides TUZZPLS2 [1.588 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUZZPLS2
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB002	The Conceptual Design of a 36 GHz RF Undulator	1676
	D. Zhu ASCo, Clayton, Victoria, Australia A.W. Cross, L. Zhang USTRAT/SUPA, Glasgow, United Kingdom Y.E. Tan AS - ANSTO, Clayton, Australia
	The CompactLight project supported by European H₂020 is to design a hard X-ray FEL facility beyond today’s state of the art. The project integrates photo injector, X-band acceleration and innovative compact short-period undulators together to make the machine more compact. RF undulator has an extraordinary advantage of working at very short undulator period. A conceptual design for a RF undulator at 36 GHz using a corrugated cylindrical waveguide operating in the HE11 mode is presented in this paper. Based on beam dynamics simulation and photon beam radiation simulations, the possibility of RF undulator to be used in CompactLight project is evaluated.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB002
About •	paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP001	Proposed Nonlinear Injection Kicker for the Australian Synchrotron	2300
	R. Auchettl, Y.E. Tan AS - ANSTO, Clayton, Australia
	Future beamline development at the Australian Synchrotron requires free floor space within the straights for a short undulator and relocation of diagnostics. Our current injection method uses a four-dipole kicker configuration that perturbs the stored beam during injection while also taking up approximately 4 meters of valuable space. To free this valuable space and provide transparent injections to the beamlines, a single pulsed nonlinear magnetic field kicker (NLK) will be deployed. The NLK has a flat and zero field at the stored beam but maximum field where the injected beam is located off-axis. NLKs deflect only the injected beam, leaving the stored beam undisturbed. NLKs have been extensively prototyped by many facilities around the world already and can produce injection efficiencies of 99 % (see e.g. ). This paper presents the preliminary magnet design for installation of a NLK at the Australian Synchrotron. We discuss the beam dynamics and thermal transfer constraints on kicker placement, field-flatness and the magnet and ceramic chamber design for adaptation to our 3 GeV beam. Installation plans and other constraints for future deployment are also outlined. T. Pulampong and R. Bartolini, "A Non-linear Injection Kicker for Diamond Light Source", in: Proc. IPAC’13, pp. 2268-2270.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP001
About •	paper received ※ 15 May 2019 paper accepted ※ 24 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB003	Automatic Classification of Post Mortem Data for Reduced Beam Down Time	3799
	M.C. Chalmers, Y.E. Tan AS - ANSTO, Clayton, Australia
	Time spent recovering from faults that result in a rapid loss of stored current (a total beam loss event) can be costly to the Australian Synchrotron facility and its researchers. The identification of a fault leading to total beam loss is assisted by a large variety of investigative tools for specific tasks, but they do not often give a thorough overview of all systems required to store beam. Post mortem data uniquely provides insight into how the beam was behaving at the specific time the dump occurred. With machine learning, we find that we can automatically and rapidly identify many types of total beam loss events by learning about the unique characteristics in the post mortem files.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB003
About •	paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB004	Hardware and Firmware Development for Enhanced Orbit Diagnostics at the Australian Synchrotron	3802
	S. Chen, R.B. Hogan, A. Michalczyk, A.C. Starritt, Y.E. Tan AS - ANSTO, Clayton, Australia
	The Enhanced Orbit Diagnostic (EOD) features will be an expansion to the existing Fast Orbit Feedback (FOFB) system that is currently in operation. The new system will add the capability of online cor-rector-to-position response matrix calculation; this will significantly reduce the required measurement time. The new features will allow the injection of PRBS noise or sinusoidal signals into correctors, to characterise and monitor the FOFB system’s parameters and performance and track it over time. The system will be built based on a Xilinx ZYNQ Sys-tem-on-Module (SOM) mounted on an in-house designed motherboard to which the existing FOFB daughter board is plugged into.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB004
About •	paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB005	Orbit Feedback and Beam Stability at the Australian Synchrotron	3805
	A.C. Starritt, A. Pozar, Y.E. Tan AS - ANSTO, Clayton, Australia
	The Australian Synchrotron (AS) is a 3rd generation light source which has been in operation since 2006. Measurement of the storage ring’s beam position is provided by 98 beam position monitors, and corrections can be applied using 42 horizontal and 56 vertical slow corrector magnets, and 42 horizontal and 42 vertical fast corrector magnets. This paper provides a background describing the feedback strategies adopted at the AS leading to the current integrated orbit feedback system, together with a description of the beam position analyse techniques currently in use. It will also highlight some of the issues encountered with the system and how they were overcome. The paper also describes planned improvements, including the enhanced orbit diagnostics functionality we are intending to introduce in the next 12 months.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB005
About •	paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Dynamics, Injection and Impedance Studies for the Proposed Single Pulsed Nonlinear Injection Kicker at the Australian Synchrotron

1219

R. Auchettl, R.T. Dowd, Y.E. Tan
AS - ANSTO, Clayton, Australia

The Australian Synchrotron are currently investigating the use of a single pulsed nonlinear injection kicker (NLK) to free floor space within the ring for future beamline development. The NLK has a zero and flat magnetic field at the stored beam to leave the stored beam undisturbed but has a maximum field off-axis where the injected beam is located. After the kick, the injected beam is stored. While NLKs have been prototyped at many facilities around the world, injection efficiency and heat loading have been the main impediment to deployment of the NLK. The wakefields that pass through the ceramic chamber aperture can cause severe heat loading and impedance. Despite achieving impressive injection efficiencies, a previous prototype at BESSY II * showed that strong interactions of the stored beam resulted in high heat load causing the thin 5µm Titanium coated ceramic chamber to reach temperatures > 500 °C and fail. To avoid beam induced heat loads, this paper presents studies of the wake impedance and thermal behaviour for our proposed NLK design. Injection simulations and future considerations for installation and operation at the Australian Synchrotron will be discussed.
* T. Atkinson et al., "Development of a non-linear kicker system to facilitate a new injection scheme for the Bessy II storage ring", in Proc. IPAC’11, 2011, THPO024, pp. 3394-3396.

Slides TUZZPLS2 [1.588 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUZZPLS2

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB002

The Conceptual Design of a 36 GHz RF Undulator

1676

D. Zhu
ASCo, Clayton, Victoria, Australia
A.W. Cross, L. Zhang
USTRAT/SUPA, Glasgow, United Kingdom
Y.E. Tan
AS - ANSTO, Clayton, Australia

The CompactLight project supported by European H₂020 is to design a hard X-ray FEL facility beyond today’s state of the art. The project integrates photo injector, X-band acceleration and innovative compact short-period undulators together to make the machine more compact. RF undulator has an extraordinary advantage of working at very short undulator period. A conceptual design for a RF undulator at 36 GHz using a corrugated cylindrical waveguide operating in the HE11 mode is presented in this paper. Based on beam dynamics simulation and photon beam radiation simulations, the possibility of RF undulator to be used in CompactLight project is evaluated.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB002

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMP001

Proposed Nonlinear Injection Kicker for the Australian Synchrotron

2300

R. Auchettl, Y.E. Tan
AS - ANSTO, Clayton, Australia

Future beamline development at the Australian Synchrotron requires free floor space within the straights for a short undulator and relocation of diagnostics. Our current injection method uses a four-dipole kicker configuration that perturbs the stored beam during injection while also taking up approximately 4 meters of valuable space. To free this valuable space and provide transparent injections to the beamlines, a single pulsed nonlinear magnetic field kicker (NLK) will be deployed. The NLK has a flat and zero field at the stored beam but maximum field where the injected beam is located off-axis. NLKs deflect only the injected beam, leaving the stored beam undisturbed. NLKs have been extensively prototyped by many facilities around the world already and can produce injection efficiencies of 99 % (see e.g. *). This paper presents the preliminary magnet design for installation of a NLK at the Australian Synchrotron. We discuss the beam dynamics and thermal transfer constraints on kicker placement, field-flatness and the magnet and ceramic chamber design for adaptation to our 3 GeV beam. Installation plans and other constraints for future deployment are also outlined.
* T. Pulampong and R. Bartolini, "A Non-linear Injection Kicker for Diamond Light Source", in: Proc. IPAC’13, pp. 2268-2270.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPMP001

About •

paper received ※ 15 May 2019 paper accepted ※ 24 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB003

Automatic Classification of Post Mortem Data for Reduced Beam Down Time

3799

M.C. Chalmers, Y.E. Tan
AS - ANSTO, Clayton, Australia

Time spent recovering from faults that result in a rapid loss of stored current (a total beam loss event) can be costly to the Australian Synchrotron facility and its researchers. The identification of a fault leading to total beam loss is assisted by a large variety of investigative tools for specific tasks, but they do not often give a thorough overview of all systems required to store beam. Post mortem data uniquely provides insight into how the beam was behaving at the specific time the dump occurred. With machine learning, we find that we can automatically and rapidly identify many types of total beam loss events by learning about the unique characteristics in the post mortem files.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB003

About •

paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB004

Hardware and Firmware Development for Enhanced Orbit Diagnostics at the Australian Synchrotron

3802

S. Chen, R.B. Hogan, A. Michalczyk, A.C. Starritt, Y.E. Tan
AS - ANSTO, Clayton, Australia

The Enhanced Orbit Diagnostic (EOD) features will be an expansion to the existing Fast Orbit Feedback (FOFB) system that is currently in operation. The new system will add the capability of online cor-rector-to-position response matrix calculation; this will significantly reduce the required measurement time. The new features will allow the injection of PRBS noise or sinusoidal signals into correctors, to characterise and monitor the FOFB system’s parameters and performance and track it over time. The system will be built based on a Xilinx ZYNQ Sys-tem-on-Module (SOM) mounted on an in-house designed motherboard to which the existing FOFB daughter board is plugged into.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB004

About •

paper received ※ 15 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB005

Orbit Feedback and Beam Stability at the Australian Synchrotron

3805

A.C. Starritt, A. Pozar, Y.E. Tan
AS - ANSTO, Clayton, Australia

The Australian Synchrotron (AS) is a 3rd generation light source which has been in operation since 2006. Measurement of the storage ring’s beam position is provided by 98 beam position monitors, and corrections can be applied using 42 horizontal and 56 vertical slow corrector magnets, and 42 horizontal and 42 vertical fast corrector magnets. This paper provides a background describing the feedback strategies adopted at the AS leading to the current integrated orbit feedback system, together with a description of the beam position analyse techniques currently in use. It will also highlight some of the issues encountered with the system and how they were overcome. The paper also describes planned improvements, including the enhanced orbit diagnostics functionality we are intending to introduce in the next 12 months.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB005

About •

paper received ※ 14 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)