IPAC2019 - List of Authors (Shu, G.)

Paper	Title	Page
TUPRB010	FIRST DESIGN STUDIES OF A NC CW RF GUN FOR EUROPEAN XFEL	1698
	G. Shu, Y. Chen, S. Lal, H.J. Qian, H. Shaker, F. Stephan DESY Zeuthen, Zeuthen, Germany
	After the successful commissioning of the European XFEL in pulsed mode, continuous wave (CW) mode operation of European X-ray Free-Electron Laser (XFEL) is under considerations for future upgrade. DESY is push-ing R&D on CW electron sources. A fully superconducting CW gun is under experimental development at DESY in Hamburg, and a normal conducting (NC) CW gun is under physics design at the Photo Injector Test facility at DESY in Zeuthen (PITZ) as a backup option. A 217 MHz NC CW gun is developed from the LBNL 187 MHz VHF gun, with enhancement on both cathode gradient and gun voltage to further improve beam brightness. This paper presents the cavity RF design, multipacting (MP) simula-tions and beam dynamics studies.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB010
About •	paper received ※ 17 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB018	Design Studies of a Proof-of-Principle Experiment on THz SASE FEL at PITZ	1713
	X. Li, P. Boonpornprasert, Y. Chen, J.D. Good, M. Groß, H. Huck, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko DESY Zeuthen, Zeuthen, Germany
	A free-electron laser based THz source is undergoing design studies at the Photo Injector Test facility at DESY in Zeuthen (PITZ). It is considered as a prototype for pump-probe experiments at the European XFEL, benefiting from the fact that the electron beam from the PITZ facility has an identical pulse train structure as the XFEL pulses. In the proposed proof-of-principle experiment, the electron beam (up to 4 nC bunch charge and 200 A peak current) will be accelerated to 16-22 MeV/c to generate SASE radiations in an LCLS-I undulator in the THz range between 60 and 100 µm with an expected energy of up to ~1 mJ/pulse. In this paper, we report our simulations on the optimization of the photo-injector and the design of the transport and matching beamline. Experimental investigations on the generation, characterization and matching of the high charge beam in the existing 22-m-long beamline will also be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB018
About •	paper received ※ 30 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS012	Emittance Reduction of RF Photoinjector Generated Electron Beams By Transverse Laser Beam Shaping	1958
	M. Groß, P. Boonpornprasert, Y. Chen, J.D. Good, H. Huck, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, X. Li, O. Lishilin, G. Loisch, D. Melkumyan, S.K. Mohanty, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko DESY Zeuthen, Zeuthen, Germany I. Will MBI, Berlin, Germany
	Laser pulse shaping is one of the key elements to generate low emittance electron beams with RF photoinjectors. Ultimately high performance can be achieved with ellipsoidal laser pulses, but 3-dimensional shaping is challenging. High beam quality can also be reached by simple transverse pulse shaping, which has demonstrated improved beam emittance compared to a transversely uniform laser in the ‘pancake’ photoemission regime. In this contribution we present the truncation of a Gaussian laser at a radius of approximately one σ in the intermediate (electron bunch length directly after emission about the same as radius) photoemission regime with high acceleration gradients (up to 60 MV/m). This type of electron bunch is used e.g. at the European XFEL and FLASH free electron lasers at DESY, Hamburg site and is being investigated in detail at the Photoinjector Test facility at DESY in Zeuthen (PITZ). Here we present ray-tracing simulations and experimental data of a laser beamline upgrade enabling variable transverse truncation. Initial projected emittance measurements taken with help of this setup are shown, as well as supporting beam dynamics simulations. Additional simulations show the potential for substantial reduction of slice emittance at PITZ.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS012
About •	paper received ※ 24 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS012	RF Design Studies of a 1.3 GHz Normal Conducting CW Buncher for European X-FEL	3109
	S. Lal, Y. Chen, H.J. Qian, H. Shaker, G. Shu, F. Stephan DESY Zeuthen, Zeuthen, Germany V.V. Paramonov RAS/INR, Moscow, Russia
	A CW upgrade of European XFEL is under consideration, and CW electron injector is under R&D at DESY. One of the injector solutions is the LCLS-II like injector based on a normal conducting CW gun and buncher. RF design of a 1.3 GHz normal conducting buncher structure with accelerating voltage of ~ 400 kV, for such a CW injector is carried out at DESY Zeuthen site. The buncher structures with different geometrical shapes and numbers of cells are studied. The designs are optimized to have higher shunt impedance, higher mode separation and lower thermal power density for CW operation. Multipacting analysis and beam dynamics simulations are also presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS012
About •	paper received ※ 12 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

FIRST DESIGN STUDIES OF A NC CW RF GUN FOR EUROPEAN XFEL

1698

G. Shu, Y. Chen, S. Lal, H.J. Qian, H. Shaker, F. Stephan
DESY Zeuthen, Zeuthen, Germany

After the successful commissioning of the European XFEL in pulsed mode, continuous wave (CW) mode operation of European X-ray Free-Electron Laser (XFEL) is under considerations for future upgrade. DESY is push-ing R&D on CW electron sources. A fully superconducting CW gun is under experimental development at DESY in Hamburg, and a normal conducting (NC) CW gun is under physics design at the Photo Injector Test facility at DESY in Zeuthen (PITZ) as a backup option. A 217 MHz NC CW gun is developed from the LBNL 187 MHz VHF gun, with enhancement on both cathode gradient and gun voltage to further improve beam brightness. This paper presents the cavity RF design, multipacting (MP) simula-tions and beam dynamics studies.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB010

About •

paper received ※ 17 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB018

Design Studies of a Proof-of-Principle Experiment on THz SASE FEL at PITZ

1713

X. Li, P. Boonpornprasert, Y. Chen, J.D. Good, M. Groß, H. Huck, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, O. Lishilin, G. Loisch, D. Melkumyan, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko
DESY Zeuthen, Zeuthen, Germany

A free-electron laser based THz source is undergoing design studies at the Photo Injector Test facility at DESY in Zeuthen (PITZ). It is considered as a prototype for pump-probe experiments at the European XFEL, benefiting from the fact that the electron beam from the PITZ facility has an identical pulse train structure as the XFEL pulses. In the proposed proof-of-principle experiment, the electron beam (up to 4 nC bunch charge and 200 A peak current) will be accelerated to 16-22 MeV/c to generate SASE radiations in an LCLS-I undulator in the THz range between 60 and 100 µm with an expected energy of up to ~1 mJ/pulse. In this paper, we report our simulations on the optimization of the photo-injector and the design of the transport and matching beamline. Experimental investigations on the generation, characterization and matching of the high charge beam in the existing 22-m-long beamline will also be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB018

About •

paper received ※ 30 April 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPTS012

Emittance Reduction of RF Photoinjector Generated Electron Beams By Transverse Laser Beam Shaping

1958

M. Groß, P. Boonpornprasert, Y. Chen, J.D. Good, H. Huck, I.I. Isaev, C. Koschitzki, M. Krasilnikov, S. Lal, X. Li, O. Lishilin, G. Loisch, D. Melkumyan, S.K. Mohanty, R. Niemczyk, A. Oppelt, H.J. Qian, H. Shaker, G. Shu, F. Stephan, G. Vashchenko
DESY Zeuthen, Zeuthen, Germany
I. Will
MBI, Berlin, Germany

Laser pulse shaping is one of the key elements to generate low emittance electron beams with RF photoinjectors. Ultimately high performance can be achieved with ellipsoidal laser pulses, but 3-dimensional shaping is challenging. High beam quality can also be reached by simple transverse pulse shaping, which has demonstrated improved beam emittance compared to a transversely uniform laser in the ‘pancake’ photoemission regime. In this contribution we present the truncation of a Gaussian laser at a radius of approximately one σ in the intermediate (electron bunch length directly after emission about the same as radius) photoemission regime with high acceleration gradients (up to 60 MV/m). This type of electron bunch is used e.g. at the European XFEL and FLASH free electron lasers at DESY, Hamburg site and is being investigated in detail at the Photoinjector Test facility at DESY in Zeuthen (PITZ). Here we present ray-tracing simulations and experimental data of a laser beamline upgrade enabling variable transverse truncation. Initial projected emittance measurements taken with help of this setup are shown, as well as supporting beam dynamics simulations. Additional simulations show the potential for substantial reduction of slice emittance at PITZ.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPTS012

About •

paper received ※ 24 April 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPTS012

RF Design Studies of a 1.3 GHz Normal Conducting CW Buncher for European X-FEL

3109

S. Lal, Y. Chen, H.J. Qian, H. Shaker, G. Shu, F. Stephan
DESY Zeuthen, Zeuthen, Germany
V.V. Paramonov
RAS/INR, Moscow, Russia

A CW upgrade of European XFEL is under consideration, and CW electron injector is under R&D at DESY. One of the injector solutions is the LCLS-II like injector based on a normal conducting CW gun and buncher. RF design of a 1.3 GHz normal conducting buncher structure with accelerating voltage of ~ 400 kV, for such a CW injector is carried out at DESY Zeuthen site. The buncher structures with different geometrical shapes and numbers of cells are studied. The designs are optimized to have higher shunt impedance, higher mode separation and lower thermal power density for CW operation. Multipacting analysis and beam dynamics simulations are also presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPTS012

About •

paper received ※ 12 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)