IPAC2019 - List of Authors (Perry, C.)

Paper	Title	Page
WEPGW092	Nanosecond-Latency Sub-Micron Resolution Stripline Beam Position Monitor Signal Processor for CLIC	2705
SUSPFO118	use link to see paper's listing under its alternate paper code
	R.L. Ramjiawan, D.R. Bett, P. Burrows, G.B. Christian, C. Perry JAI, Oxford, United Kingdom
	A high-resolution, low-latency stripline beam position monitor (BPM) signal processor has been developed for use in an intra-train feedback system for the Compact Linear Collider (CLIC). The processor was designed to have extremely low latency of order nanoseconds and a target position resolution of order 1 micron. The processor consists of a pair of diodes to form the difference and sum of a pair of stripline BPM inputs with microstrip filters to reduce out-of-band noise. The assembled prototype was optimized for use with the electron beam in the extraction line of the Accelerator Test Facility at the High Energy Accelerator Research Organization (KEK) in Japan but the underlying design is readily scaleable to a higher frequency response relevant for CLIC. A latency of 3 ns was measured in a testbench setup. We report the results of performance tests with beam in which the position resolution was measured to be c. 325 nm.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW092
About •	paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB096	Real-Time Beam Orbit Stabilisation to 200 Nanometres in Single-Pass Mode Using a High-Precision Dual-Phase Feedback System	4049
	D.R. Bett, P. Burrows, G.B. Christian, C. Perry, R.L. Ramjiawan JAI, Oxford, United Kingdom
	A high-resolution, low-latency, stripline beam position monitor (BPM) system has been developed for use at particle accelerators and beamlines that operate with trains of particle bunches with bunch separations as low as several tens of nanoseconds, such as future linear electron-positron colliders and free-electron lasers. The system consists of fast analogue stripline BPM signal processors input to a custom FPGA-based digital feedback board which drives a pair of kickers local to the BPMs and nominally orthogonal in phase in closed-loop feedback mode, thus achieving both beam position and angle stabilisation. The feedback system was tested with the electron beam in the extraction line of the Accelerator Test Facility at the High Energy Accelerator Research Organization (KEK) in Japan. Recent upgrades to the BPMs have increased the single-shot, real-time position resolution of the system to ~150 nm for a beam charge of 1.3 nC. We report the latest results which demonstrate the feedback system operating at this resolution limit and a beam stabilisation performance of 200 nm.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB096
About •	paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

WEPGW092

Nanosecond-Latency Sub-Micron Resolution Stripline Beam Position Monitor Signal Processor for CLIC

2705

SUSPFO118

use link to see paper's listing under its alternate paper code

R.L. Ramjiawan, D.R. Bett, P. Burrows, G.B. Christian, C. Perry
JAI, Oxford, United Kingdom

A high-resolution, low-latency stripline beam position monitor (BPM) signal processor has been developed for use in an intra-train feedback system for the Compact Linear Collider (CLIC). The processor was designed to have extremely low latency of order nanoseconds and a target position resolution of order 1 micron. The processor consists of a pair of diodes to form the difference and sum of a pair of stripline BPM inputs with microstrip filters to reduce out-of-band noise. The assembled prototype was optimized for use with the electron beam in the extraction line of the Accelerator Test Facility at the High Energy Accelerator Research Organization (KEK) in Japan but the underlying design is readily scaleable to a higher frequency response relevant for CLIC. A latency of 3 ns was measured in a testbench setup. We report the results of performance tests with beam in which the position resolution was measured to be c. 325 nm.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW092

About •

paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPRB096

Real-Time Beam Orbit Stabilisation to 200 Nanometres in Single-Pass Mode Using a High-Precision Dual-Phase Feedback System

4049

D.R. Bett, P. Burrows, G.B. Christian, C. Perry, R.L. Ramjiawan
JAI, Oxford, United Kingdom

A high-resolution, low-latency, stripline beam position monitor (BPM) system has been developed for use at particle accelerators and beamlines that operate with trains of particle bunches with bunch separations as low as several tens of nanoseconds, such as future linear electron-positron colliders and free-electron lasers. The system consists of fast analogue stripline BPM signal processors input to a custom FPGA-based digital feedback board which drives a pair of kickers local to the BPMs and nominally orthogonal in phase in closed-loop feedback mode, thus achieving both beam position and angle stabilisation. The feedback system was tested with the electron beam in the extraction line of the Accelerator Test Facility at the High Energy Accelerator Research Organization (KEK) in Japan. Recent upgrades to the BPMs have increased the single-shot, real-time position resolution of the system to ~150 nm for a beam charge of 1.3 nC. We report the latest results which demonstrate the feedback system operating at this resolution limit and a beam stabilisation performance of 200 nm.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB096

About •

paper received ※ 13 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)