IPAC2019 - List of Authors (Ondreka, D.)

Paper	Title	Page
MOPTS035	Recommissioning of SIS18 After FAIR Upgrades	932
	D. Ondreka, C. Dimopoulou, H.C. Hüther, H. Liebermann, J. Stadlmann, R.J. Steinhagen GSI, Darmstadt, Germany
	The synchrotron SIS18 of the GSI facility has recently resumed beam operation after a long shutdown, during which major upgrades for the operation of SIS18 in the FAIR facility were realized. This signifies a major milestone for the mission of GSI and FAIR. On one hand, the scientific program of GSI depends strongly on beam from SIS18, including the very important developments of detectors for FAIR experiments. On the other hand, large parts of the existing GSI accelerator facility, including SIS18, are now operated with the FAIR control system, demonstrating its suitability for control of a large scale accelerator facility. Commissioning of the new control system started during the shutdown with a series of dry runs, which proved very useful to establish the basic functionalities. Recommissioning of SIS18 was further facilitated by the fact that the machine model of SIS18, implemented in the modeling framework LSA, had already been tested with beam several years before the shutdown. Thus, all operation modes of SIS18, including multi-turn injection, electron cooling, as well as fast and slow extraction could be successfully commissioned during the first weeks of operation. Other commissioning activities concerned the operation of new devices installed during the shutdown. These devices, mostly installed to prepare SIS18 for the operation with FAIR design parameters, open new possibilities in the standard operation of SIS18. A challenge for the operation of SIS18 is posed by ground motion due to ground water lowering for the nearby FAIR construction site. Surveys revealed that SIS18 subsided by several centimeters during one year. Even though the machine was realigned prior to recommissioning, the dynamics of the ground motion will continue to affect operation of SIS18.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS035
About •	paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW021	Generic Digitization of Analog Signals at FAIR – First Prototype Results at GSI	2514
	R.J. Steinhagen, R. Bär, A. Franke, A. Krimm, K. Lüghausen, D. Ondreka, A. Schwinn, M. Thieme GSI, Darmstadt, Germany
	FAIR operation and notably the new FAIR Control Centre will be based on a ’fully-digital’ control paradigm for which about 300 generic digitizers covering analog bandwidths and sampling frequencies from a few MHz to a GHz will be deployed. The aim is to acquire all pertinent accelerator system and beam parameters to facilitate a multi-mission of continuous performance tracking, (semi-)automated feedbacks and setup tools, early detection and isolation of hardware failures or near-misses, and to provide a dependable generic platform for equipment experts that enable post-mortem analyses or remote diagnostics. The goal of the controls integration was to provide a generic abstraction of the vendor-specific electro-mechanical form-factor and software interfaces based on modern software-defined-radio (SDR) principles. In addition to a ns-level-syncronised time- and frequency-domain based acquisitions, the interface provides a wide range of generic user-configurable signal post-processing routines common for SDRs and also found in many modern benchtop oscilloscopes, spectrum- or vector-network analysers. The acquired raw and derived signals are exported to the FAIR control system using a standardised front-end software architecture (FESA) and a common middle-ware (CMW). Further integration goals were to simplify possible future extensions, compactness, readability, reusability, testability, and long-term maintainability of the code-based which led to the re-use of established open-source signal processing and data fitting frameworks such as GNU-Radio and ROOT. While explicitly kept open for new or other specific digitizer or SDRs, the initial integration, prototyping, and testing have been done for the PS3000-, PS4000-, and PS600-series of digitizers from Pico Technology.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW021
About •	paper received ※ 15 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Recommissioning of SIS18 After FAIR Upgrades

932

D. Ondreka, C. Dimopoulou, H.C. Hüther, H. Liebermann, J. Stadlmann, R.J. Steinhagen
GSI, Darmstadt, Germany

The synchrotron SIS18 of the GSI facility has recently resumed beam operation after a long shutdown, during which major upgrades for the operation of SIS18 in the FAIR facility were realized. This signifies a major milestone for the mission of GSI and FAIR. On one hand, the scientific program of GSI depends strongly on beam from SIS18, including the very important developments of detectors for FAIR experiments. On the other hand, large parts of the existing GSI accelerator facility, including SIS18, are now operated with the FAIR control system, demonstrating its suitability for control of a large scale accelerator facility. Commissioning of the new control system started during the shutdown with a series of dry runs, which proved very useful to establish the basic functionalities. Recommissioning of SIS18 was further facilitated by the fact that the machine model of SIS18, implemented in the modeling framework LSA, had already been tested with beam several years before the shutdown. Thus, all operation modes of SIS18, including multi-turn injection, electron cooling, as well as fast and slow extraction could be successfully commissioned during the first weeks of operation. Other commissioning activities concerned the operation of new devices installed during the shutdown. These devices, mostly installed to prepare SIS18 for the operation with FAIR design parameters, open new possibilities in the standard operation of SIS18. A challenge for the operation of SIS18 is posed by ground motion due to ground water lowering for the nearby FAIR construction site. Surveys revealed that SIS18 subsided by several centimeters during one year. Even though the machine was realigned prior to recommissioning, the dynamics of the ground motion will continue to affect operation of SIS18.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPTS035

About •

paper received ※ 15 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPGW021

Generic Digitization of Analog Signals at FAIR – First Prototype Results at GSI

2514

R.J. Steinhagen, R. Bär, A. Franke, A. Krimm, K. Lüghausen, D. Ondreka, A. Schwinn, M. Thieme
GSI, Darmstadt, Germany

FAIR operation and notably the new FAIR Control Centre will be based on a ’fully-digital’ control paradigm for which about 300 generic digitizers covering analog bandwidths and sampling frequencies from a few MHz to a GHz will be deployed. The aim is to acquire all pertinent accelerator system and beam parameters to facilitate a multi-mission of continuous performance tracking, (semi-)automated feedbacks and setup tools, early detection and isolation of hardware failures or near-misses, and to provide a dependable generic platform for equipment experts that enable post-mortem analyses or remote diagnostics. The goal of the controls integration was to provide a generic abstraction of the vendor-specific electro-mechanical form-factor and software interfaces based on modern software-defined-radio (SDR) principles. In addition to a ns-level-syncronised time- and frequency-domain based acquisitions, the interface provides a wide range of generic user-configurable signal post-processing routines common for SDRs and also found in many modern benchtop oscilloscopes, spectrum- or vector-network analysers. The acquired raw and derived signals are exported to the FAIR control system using a standardised front-end software architecture (FESA) and a common middle-ware (CMW). Further integration goals were to simplify possible future extensions, compactness, readability, reusability, testability, and long-term maintainability of the code-based which led to the re-use of established open-source signal processing and data fitting frameworks such as GNU-Radio and ROOT. While explicitly kept open for new or other specific digitizer or SDRs, the initial integration, prototyping, and testing have been done for the PS3000-, PS4000-, and PS600-series of digitizers from Pico Technology.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW021

About •

paper received ※ 15 May 2019 paper accepted ※ 18 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)