IPAC2019 - List of Authors (Leitner, D.)

Paper	Title	Page
TUPGW088	Removal and Installation Planning for the Advanced Light Source - Upgrade Project	1609
	D. Leitner, P.W. Casey, K. Chow, D.F. Fuller, M. Leitner, A.J. Lodge, M. Lopez, J. Niu, P. Novak, C. Steier, S.P. Virostek, W.L. Waldron LBNL, Berkeley, California, USA
	The ALS-U project is a proposed upgrade to the Advanced Light Source (ALS) at Berkeley Lab that aims to deliver diffraction limited performance in the soft x-ray range. By lowering the horizontal emittance to about 70 pm rad, the brightness for soft x-rays will increase two orders of magnitude compared to the current ALS. The design utilizes a nine-bend achromat lattice, with reverse bending magnets and on-axis swap-out injection utilizing an accumulator ring. This paper will describe the preliminary plans for the installation of the new three-bend achromat accumulator ring (AR) in the existing tunnel and for replacing the current storage ring with the new nine-bend achromat lattice. The AR will be installed during regular maintenance shutdowns while the ALS continues to operate. The SR will be replaced during a nine months installation period followed by three months of commissioning during the twelve darktime period.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW088
About •	paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW097	Design Progress of ALS-U, the Soft X-ray Diffraction Limited Upgrade of the Advanced Light Source	1639
	C. Steier, Ph. Amstutz, K.M. Baptiste, P.A. Bong, E.S. Buice, P.W. Casey, K. Chow, S. De Santis, R.J. Donahue, M.P. Ehrlichman, J.P. Harkins, T. Hellert, M.J. Johnson, J.-Y. Jung, S.C. Leemann, R.M. Leftwich-Vann, D. Leitner, T.H. Luo, O. Omolayo, J.R. Osborn, G. Penn, G.J. Portmann, D. Robin, F. Sannibale, C. Sun, C.A. Swenson, M. Venturini, S.P. Virostek, W.L. Waldron, E.J. Wallén LBNL, Berkeley, California, USA
	Funding: This work was supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The ALS-U project to upgrade the Advanced Light Source to a multi bend achromat lattice received CD-1 approval in 2018 marking the end of its conceptual design phase. The ALS-U design promises to deliver diffraction limited performance in the soft x-ray range by lowering the horizontal emittance to about 70 pm rad resulting in two orders of magnitude brightness increase for soft x-rays compared to the current ALS. The design utilizes a nine bend achromat lattice, with reverse bending magnets and on-axis swap-out injection utilizing an accumulator ring. This paper presents recent design progress of the accelerator, as well as new results of the mature R&D program.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW097
About •	paper received ※ 21 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXPLS1	High Performance ECR Sources for Next-Generation Nuclear Science Facilities	2224
	D. Leitner LBNL, Berkeley, California, USA
	Modern heavy-ion accelerators require intense heavy-ion beams with high charge state. Electron Cyclotron Resonance (ECR) sources are the primary tool for generating such beams. Advances in magnet technology and an improved understanding of the ECR ion source plasma physics have led to significant improvements in ECR source performance over the last several decades. The current state of the art is represented by third-generation sources operating at frequencies around 28 GHz and peak coil fields of about 7 T using NbTi conductor. Fourth-generation ECR ion sources with an operating frequency above 40 GHz have the potential to quadruple the source output beam current. These sources will need to incorporate advanced conductor technologies and/or novel coil configurations in order to exceed the limitations of the present structures. This talk will present worldwide efforts currently underway to develop high-performance ECR sources using new design approaches in support of next-generation nuclear physics facilities.
	Slides WEXPLS1 [8.012 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEXPLS1
About •	paper received ※ 16 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THYPLM1	Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project	3408
	M. Leitner, D. Arbelaez, J.N. Corlett, A.J. DeMello, L. Garcia Fajardo, D. Leitner, S. Marks, K.A. McCombs, T. Miller, D.V. Munson, J. Niu, K.L. Ray, D.A. Sadlier, D. Schlueter, E.J. Wallén LBNL, Berkeley, California, USA H. Bassan, D.E. Bruch, D.S. Martinez-Galarce, H.-D. Nuhn, M. Rowen, Z.R. Wolf SLAC, Menlo Park, California, USA C.W. Chen NSRRC, Hsinchu, Taiwan
	Funding: Work supported by the Director, Oﬃce of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231. The Linear Coherent Light Source II (LCLS-II) is a free electron laser facility currently in its final construction stage at Stanford Linear Accelerator Center. The project includes two variable-gap, hybrid-permanent-magnet undulator lines: A soft x-ray undulator line with 21 undulator segments optimized for a photon energy range from 0.2 keV to 1.3 keV and a hard x-ray undulator line with 32 undulator segments designed for a photon energy range from 1.0 keV to 25.0 keV. This paper focuses on the design, development, and performance of the hard x-ray undulator line which utilizes uniquely-developed, vertically-polarizing undulators. To fully compensate the magnetic force throughout the entire gap range these devices incorporate non-linear spring systems which permit the construction of relatively compact undulators. However, significant magnetic field repeatability challenges have been encountered during prototyping of this novel design. The paper describes the innovative design improvements that were implemented which lead to reaching the LCLS-II required performance. These final design solutions can also be advantageous improving the operation of any future undulator design.
	Slides THYPLM1 [28.498 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THYPLM1
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Removal and Installation Planning for the Advanced Light Source - Upgrade Project

1609

D. Leitner, P.W. Casey, K. Chow, D.F. Fuller, M. Leitner, A.J. Lodge, M. Lopez, J. Niu, P. Novak, C. Steier, S.P. Virostek, W.L. Waldron
LBNL, Berkeley, California, USA

The ALS-U project is a proposed upgrade to the Advanced Light Source (ALS) at Berkeley Lab that aims to deliver diffraction limited performance in the soft x-ray range. By lowering the horizontal emittance to about 70 pm rad, the brightness for soft x-rays will increase two orders of magnitude compared to the current ALS. The design utilizes a nine-bend achromat lattice, with reverse bending magnets and on-axis swap-out injection utilizing an accumulator ring. This paper will describe the preliminary plans for the installation of the new three-bend achromat accumulator ring (AR) in the existing tunnel and for replacing the current storage ring with the new nine-bend achromat lattice. The AR will be installed during regular maintenance shutdowns while the ALS continues to operate. The SR will be replaced during a nine months installation period followed by three months of commissioning during the twelve darktime period.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW088

About •

paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPGW097

Design Progress of ALS-U, the Soft X-ray Diffraction Limited Upgrade of the Advanced Light Source

1639

C. Steier, Ph. Amstutz, K.M. Baptiste, P.A. Bong, E.S. Buice, P.W. Casey, K. Chow, S. De Santis, R.J. Donahue, M.P. Ehrlichman, J.P. Harkins, T. Hellert, M.J. Johnson, J.-Y. Jung, S.C. Leemann, R.M. Leftwich-Vann, D. Leitner, T.H. Luo, O. Omolayo, J.R. Osborn, G. Penn, G.J. Portmann, D. Robin, F. Sannibale, C. Sun, C.A. Swenson, M. Venturini, S.P. Virostek, W.L. Waldron, E.J. Wallén
LBNL, Berkeley, California, USA

Funding: This work was supported by the Director, Office of Science, Office of Basic Energy Sciences, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
The ALS-U project to upgrade the Advanced Light Source to a multi bend achromat lattice received CD-1 approval in 2018 marking the end of its conceptual design phase. The ALS-U design promises to deliver diffraction limited performance in the soft x-ray range by lowering the horizontal emittance to about 70 pm rad resulting in two orders of magnitude brightness increase for soft x-rays compared to the current ALS. The design utilizes a nine bend achromat lattice, with reverse bending magnets and on-axis swap-out injection utilizing an accumulator ring. This paper presents recent design progress of the accelerator, as well as new results of the mature R&D program.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPGW097

About •

paper received ※ 21 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXPLS1

High Performance ECR Sources for Next-Generation Nuclear Science Facilities

2224

D. Leitner
LBNL, Berkeley, California, USA

Modern heavy-ion accelerators require intense heavy-ion beams with high charge state. Electron Cyclotron Resonance (ECR) sources are the primary tool for generating such beams. Advances in magnet technology and an improved understanding of the ECR ion source plasma physics have led to significant improvements in ECR source performance over the last several decades. The current state of the art is represented by third-generation sources operating at frequencies around 28 GHz and peak coil fields of about 7 T using NbTi conductor. Fourth-generation ECR ion sources with an operating frequency above 40 GHz have the potential to quadruple the source output beam current. These sources will need to incorporate advanced conductor technologies and/or novel coil configurations in order to exceed the limitations of the present structures. This talk will present worldwide efforts currently underway to develop high-performance ECR sources using new design approaches in support of next-generation nuclear physics facilities.

Slides WEXPLS1 [8.012 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEXPLS1

About •

paper received ※ 16 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THYPLM1

Development of the Vertically Polarizing Hard X-Ray Undulator Segments for the Linear Coherent Light Source Upgrade (LCLS-II) Project

3408

M. Leitner, D. Arbelaez, J.N. Corlett, A.J. DeMello, L. Garcia Fajardo, D. Leitner, S. Marks, K.A. McCombs, T. Miller, D.V. Munson, J. Niu, K.L. Ray, D.A. Sadlier, D. Schlueter, E.J. Wallén
LBNL, Berkeley, California, USA
H. Bassan, D.E. Bruch, D.S. Martinez-Galarce, H.-D. Nuhn, M. Rowen, Z.R. Wolf
SLAC, Menlo Park, California, USA
C.W. Chen
NSRRC, Hsinchu, Taiwan

Funding: Work supported by the Director, Oﬃce of Science, of the U.S. Department of Energy under Contract No. DE-AC02-05CH11231.
The Linear Coherent Light Source II (LCLS-II) is a free electron laser facility currently in its final construction stage at Stanford Linear Accelerator Center. The project includes two variable-gap, hybrid-permanent-magnet undulator lines: A soft x-ray undulator line with 21 undulator segments optimized for a photon energy range from 0.2 keV to 1.3 keV and a hard x-ray undulator line with 32 undulator segments designed for a photon energy range from 1.0 keV to 25.0 keV. This paper focuses on the design, development, and performance of the hard x-ray undulator line which utilizes uniquely-developed, vertically-polarizing undulators. To fully compensate the magnetic force throughout the entire gap range these devices incorporate non-linear spring systems which permit the construction of relatively compact undulators. However, significant magnetic field repeatability challenges have been encountered during prototyping of this novel design. The paper describes the innovative design improvements that were implemented which lead to reaching the LCLS-II required performance. These final design solutions can also be advantageous improving the operation of any future undulator design.

Slides THYPLM1 [28.498 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THYPLM1

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)